MAGRES EAM580R-SC - CANopen®/SAE J1939 | Absolute encoders

Encoder single- or multiturn / CANopen®/SAE J1939
E1 approval (KBA)
High protection IP 67
High resistance to shock and vibrations
Protection against corrosion CX (C5-M)
Wire cross section 0.5 mm²
Electronic gear function
Applicable up to PLd (ISO 13849)

기술 데이터

모두 표시

Technical data - electrical ratings

Voltage supply

10...30 VDC

Consumption typ.

20 mA (24 VDC, w/o load)

Initializing time

≤ 170 ms after power on

Interface

CANopen®
SAE J1939

Function

Multiturn
Singleturn

Profile conformity

CANopen® CiA communication profile DS 301, LSS profile DSP 305, device profile DS 406

Steps per revolution

≤16384 / 14 bit

Number of revolutions

≤262144 / 18 bit

Absolute accuracy

±0,15 ° (+20 ±15 °C)
±0,25 ° (-40...+85 °C)

Sensing method

Magnetic

Code sequence

CW: ascending values with clockwise sense of rotation (looking at flange)

Output stages

CAN-Bus, LV (3.3 V) compatible ISO 11898

Interference immunity

EN 61000-6-2
UN ECE R10

Emitted interference

EN 61000-6-4
UN ECE R10

MTTF_d (ISO 13849)

High (>100 years)
Use in safety functions exclusively based on Application Note and MTTFd reliability prediction (request separately).

Approval

UL approval / E217823
E1 approval (KBA)

Technical data - mechanical design

Size (flange)

ø58 mm

Shaft type

ø10 x 20 mm, solid shaft with flat

Flange

Clamping flange

Protection EN 60529

IP 67 (with shaft seal)

Operating speed

≤6000 rpm

Starting torque

≤2,5 Ncm (+20 °C, IP 67)

Moment of inertia

15,38 gcm²

Admitted shaft load

≤40 N axial
≤80 N radial

Material

Housing: steel, powder-coated
Flange: aluminium
Shaft: stainless steel

Corrosion protection

IEC 60068-2-52 Salt mist
for ambient conditions CX (C5-M) according to ISO 12944-2

Operating temperature

-40...+85 °C (see general information)

Relative humidity

95 %

Resistance

EN 60068-2-6
Vibration 30 g, 10-2000 Hz
EN 60068-2-27
Shock 500 g, 1 ms

Weight approx.

250 g

Connection

Flange connector M12, 5-pin
Cable 2 m

소프트웨어

모두 표시

Software

EAMxxx describing file EDS / CANopen
- (zip | 8 KB)
Baumer Sensor Suite
- (zip | 163 MB)

다운로드

모두 표시

Data sheet

Data sheet – EAM580R-SC - CANopen®/SAE J1939
- ZH (pdf | 1 MB)
Data sheet – EAM580R-SC - CANopen®/SAE J1939
- DE (pdf | 971 KB)
Data sheet – EAM580R-SC - CANopen®/SAE J1939
- EN (pdf | 939 KB)
Data sheet – EAM580R-SC - CANopen®/SAE J1939
- FR (pdf | 941 KB)

Quickstart

EAM580R - CANopen® / SAEJ1939
- DE/EN/FR/IT/ES/RU (pdf | 853 KB)

Software Manual

EAM360, EAM580 - CANopen
- EN (pdf | 1 MB)
EAM360, EAM580 - SAE J1939
- EN (pdf | 1020 KB)

Certificates / approvals

RoC / E1 approval - EAM580R
- DE/EN (pdf | 129 KB)

Brochures / Catalogs

Brochure – Magnetic absolute encoders EAM580 / EAM360
- DE (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- EN (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- FR (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- IT (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ES (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ZH (pdf | 1 MB)

Declaration of conformity

DoC / CoC - EAM580 / EAM580R
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 281 KB)

CAD

EAM580 / EAM580R: Solid shaft ø10 mm, cable radial, clamping flange, IP67
- (zip | 200 KB)
EAM580 / EAM580R: Solid shaft ø10 mm, M12 radial, clamping flange, IP67
- (zip | 190 KB)

부속품

모두 표시

Mounting accessories

	Double loops coupling (D1=10 / D2=10) For encoder with solid shaft 제품번호: 11101781	Thermally and electrically isolated Absorbing shocks and vibration Excellent compensation of radial, lateral and angular misalignments Medium torsional stiffness Low restoring forces Maintenance-free
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft 제품번호: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=10) For encoder with solid shaft 제품번호: 11065923	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft 제품번호: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft 제품번호: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=10) For encoder with solid shaft 제품번호: 10141133	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft 제품번호: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=10) For encoder with solid shaft 제품번호: 11069340	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Bellows coupling (D1=10 / D2=10) For encoder with solid shaft 제품번호: 11053277	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Spring encoder arm 제품번호: 11101893	Tether arm for Ø58 mm with clamping flange Optimal for use encoders with measuring wheel Virtually any contact pressure adjustable Versatile mounting options
	Mounting adaptor For encoders with clamping flange 제품번호: 10125051	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount

Connectors and cables

	Female connector M12, 5-pin, straight, shielded, 2 m cable 제품번호: 11046264	Female connector M12, 5-pin, straight
	Female connector M12, 5-pin, straight, shielded, 5 m cable 제품번호: 11046266	Female connector M12, 5-pin, straight

Measuring wheels

	MR752.10A Small measuring wheel 제품번호: 11011440	Circumference 30.48 cm Surface profile: Smooth Surface material: Polyurethan Bore ø10 mm
	MR241.10D Small measuring wheel 제품번호: 11033281	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø10 mm
	MR261.10A Small measuring wheel 제품번호: 11033290	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø10 mm
	MR291.10D Small measuring wheel 제품번호: 11033300	Circumference 20 cm Surface profile: Knurled Surface material: Hytrel TPE-E Bore ø10 mm
	MR512.10A Large measuring wheel 제품번호: 11033308	Circumference 50 cm Surface profile: Cross-knurled Surface material: Aluminium Bore ø10 mm
	MR552.10A Large measuring wheel 제품번호: 11033323	Circumference 50 cm Surface profile: Smooth Surface material: Polyurethan Bore ø10 mm
	MR562.10A Large measuring wheel 제품번호: 11033329	Circumference 50 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø10 mm
	MR542.10D Large measuring wheel 제품번호: 11038480	Circumference 50 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø10 mm
	MR592.10D Large measuring wheel 제품번호: 11038481	Circumference 50 cm Surface profile: Knurled Surface material: Hytrel TPE-E Bore ø10 mm