O200.RP.T-GW1J.72CV/H006

제품번호: 11230702

Extended functional reserve capacities for maximum reliability
Baumer PinPoint LED: Small, homogeneous light spot with sharp edges
Long-term stable detection of transparent objects thanks to compensation of environmental influences
Manipulation-proof, simple teach-in via qTeach or line teach
IO-Link for extended parameterization options and additional diagnostic data
Quick mounting by means of M3 threaded bushes made of stainless steel

기술 데이터

모두 표시

Type

Retro-reflective sensor

Version

Transparency object detection
Single lens optics

Light source

Pulsed PinPoint LED

Actual range Sb

0,8 m

Nominal range Sn

Polarization filter

Minimal signal attenuation

Alignment / soiled lens indicator

Flashing output indicator

Output indicator

LED yellow

Power on indication

LED green

Sensitivity adjustment

Teach-in and IO-Link

Wave length

644 nm

Suppression of reciprocal influence

Alignment optical axis

< 1,5°

Electrical data

Response time / release time

< 0,25 ms

Jitter

< 0,06 ms

Voltage supply range +Vs

10 … 30 VDC

Current consumption max. (no load)

40 mA (@ 10 VDC)

Current consumption typ.

16 mA (@ 24 VDC)

Voltage drop Vd

<2 VDC

Output function

Light / dark operate

Output circuit

Push-pull

Output current

50 mA

Short circuit protection

Reverse polarity protection

Communication interface

Baud rate

230.4 kBaud (COM 3)

Adjustable parameters

Switching point
Time filters
LED status indicators
Output logic
Counter
Deactivate the sensor element
Find Me function
Teach-in mode

IO-Link port type

Class A

Process data length

32 Bit

Process data structure

Bit 0 = SSC1 (presence)
Bit 2 = quality
Bit 3 = alarm
Bit 5 = SSC4 (counter)
Bit 16-31 = 16 Bit measurement

Interface

IO-Link V1.1

Additional data

Signal strength
Excess gain
Operating cycles
Device temperature

Cycle time

≥ 0,6 ms

Mechanical data

Width / diameter

8 mm

Height / length

25,1 mm

Depth

15,8 mm

Design

Rectangular

Mechanical mounting

Threaded sleeves M3 (stainless steel)

Housing material

Plastic (ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Cable characteristics

PVC / PVC 4 x 0.08 mm²

Operating temperature

-25 … +50 °C

Protection class

IP 67

3D-Model

모두 표시

3D-Model

CAD-모델을 생성하려면 CADENAS에 외부 로그인이 필요합니다.

소프트웨어

모두 표시

Software

Software – IODD V1.1 (O200x.Rx.T)
- (zip | 260 KB)

다운로드

모두 표시

Data sheet

Data sheet – O200.RP.T-GW1J.72CV/H006
- ZH (pdf | 872 KB)
Data sheet – O200.RP.T-GW1J.72CV/H006
- FR (pdf | 797 KB)
Data sheet – O200.RP.T-GW1J.72CV/H006
- DE (pdf | 798 KB)
Data sheet – O200.RP.T-GW1J.72CV/H006
- EN (pdf | 797 KB)

Operating Manual

Quickstart – O200 Xpert Transparent
- EN/DE/FR/ES/IT/ZH (pdf | 741 KB)

Software Manual

Operating instruction – O200 IO-Link
- EN (pdf | 1 MB)

Certificates / approvals

DoC / CoC - O200
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 185 KB)

EPLAN

데이터 포털 링크
- 데이터 포털 링크

다이어그램

모두 표시

Excess gain curve

The selected altAttribute does not exist!

(png | 118 KB)

도면

모두 표시

부속품

모두 표시

Reflectors

	FTDR 048U048 Reflector rectangular 60 x 51 mm 제품번호: 11229661	Fastening method screw mounting For Retro-reflective sensors Ultrafine micro structure For laser light sensors and transparent object detection
	FTDR 020U020 Reflector rectangular 32 x 20 mm 제품번호: 11229662	Fastening method screw mounting For pocket-size edge sensor PosCon
	FTDF 025U025 Reflective tape rectangular 25 x 25 mm 제품번호: 11229663	Fastening method self-adhesive For Retro-reflective sensors Ultrafine micro structure For laser light sensors and transparent object detection
	FTDF 040U250 Reflector rectangular 250 x 40 mm 제품번호: 11117727	Fastening method self-adhesive For Retro-reflective sensors Ultrafine micro structure For laser light sensors and transparent object detection

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital 제품번호: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital 제품번호: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	USB-C IO-Link Master 제품번호: 11234828	Compact IO-Link master perfectly suited for testing and getting to know IO-Link sensors Simple power supply via USB-C Quick and easy connection with the Baumer Sensor Suite Specifically designed with the needs of engineering and service in mind

Mounting accessories

	10150326 Sensofix series 10 / series 20 제품번호: 10150326	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-200.STRAIGHT Mounting bracket O200 제품번호: 11206601	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_L Mounting bracket O200 (L design) 제품번호: 11206602	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_S Mounting bracket O200 (S design) 제품번호: 11206603	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.SERIES10 Mounting bracket O200 - Retrofit for sensors series 10 제품번호: 11208477	Material: plastic