O200.RP-GW1J.72CV

제품번호: 11210550

Extended functional reserve capacities for maximum reliability
Baumer PinPoint LED: Small, homogeneous light spot with sharp edges
Manipulation-proof, simple teach-in via qTeach or line teach
IO-Link for extended parameterization options and additional diagnostic data
Robust housing with stainless steel spacer sleeves

기술 데이터

모두 표시

Type

Retro-reflective sensor

Light source

Pulsed PinPoint LED

Actual range Sb

Nominal range Sn

Smallest object recognizable typ.

4 mm (FTAR 013A000)

Polarization filter

Alignment / soiled lens indicator

Flashing output indicator

Output indicator

LED yellow

Power on indication

LED green

Sensitivity adjustment

Teach-in and IO-Link

Wave length

644 nm

Suppression of reciprocal influence

Alignment optical axis

< 1,5°

Electrical data

Response time / release time

< 0,25 ms

Voltage supply range +Vs

10 … 30 VDC

Current consumption max. (no load)

40 mA (@ 10 VDC)

Current consumption typ.

16 mA (@ 24 VDC)

Voltage drop Vd

<2 VDC

Output function

Light / dark operate

Output circuit

Push-pull

Output current

50 mA

Short circuit protection

Reverse polarity protection

Communication interface

Baud rate

230.4 kBaud (COM 3)

Adjustable parameters

Switching point
Time filters
LED status indicators
Output logic
Counter
Deactivate the sensor element
Find Me function
Teach-in mode

IO-Link port type

Class A

Process data length

32 Bit

Process data structure

Bit 0 = SSC1 (presence)
Bit 2 = quality
Bit 3 = alarm
Bit 5 = SSC4 (counter)
Bit 16-31 = 16 Bit measurement

Interface

IO-Link V1.1

Additional data

Signal strength
Excess gain
Operating cycles
Device temperature

Cycle time

≥ 0,6 ms

Mechanical data

Width / diameter

8 mm

Height / length

25,1 mm

Depth

15,8 mm

Design

Rectangular

Mechanical mounting

Sleeve smooth (stainless steel)

Housing material

Plastic (ASA, PMMA)

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Cable characteristics

PVC / PVC 4 x 0.08 mm²

Operating temperature

-25 … +50 °C

Protection class

IP 67

3D-Model

모두 표시

3D-Model

CAD-모델을 생성하려면 CADENAS에 외부 로그인이 필요합니다.

소프트웨어

모두 표시

Software

Software – IODD V1.1 (O200x.RP)
- (zip | 260 KB)

다운로드

모두 표시

Data sheet

Data sheet – O200.RP-GW1J.72CV
- ZH (pdf | 1 MB)
Data sheet – O200.RP-GW1J.72CV
- FR (pdf | 1 MB)
Data sheet – O200.RP-GW1J.72CV
- DE (pdf | 1 MB)
Data sheet – O200.RP-GW1J.72CV
- EN (pdf | 1 MB)

Quickstart

Quickstart – O200 Xpert
- EN/DE/FR/ES/IT/ZH (pdf | 667 KB)

Software Manual

Operating instruction – O200 IO-Link
- EN (pdf | 1 MB)

Certificates / approvals

DoC / CoC - O200
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 185 KB)

EPLAN

데이터 포털 링크
- 데이터 포털 링크

다이어그램

모두 표시

Excess gain curve

The selected altAttribute does not exist!

(png | 245 KB)

(png | 248 KB)

도면

모두 표시

부속품

모두 표시

Reflectors

	ZREFL-200.STANDARD Reflector rectangular 제품번호: 11206604	Fastening method screw mounting With attached reflective tape For Retro-reflective sensors Mounting compatible to series 200
	FTDR 084A084 Reflector rectangular 84 x 84 mm 제품번호: 11101254	Fastening method screw mounting For Retro-reflective sensors
	FTDR 010A014 Reflector rectangular 16,8 x 12,8 mm 제품번호: 10123622	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 015A038 Reflector rectangular 40 x 18 mm 제품번호: 10128191	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 017A027 Reflector rectangular 43 x 20,3 mm 제품번호: 10145962	Fastening method screw mounting Micro structure For Retro-reflective sensors
	FTDR 029A046 Reflector rectangular 48 x 32,5 mm 제품번호: 10125741	Fastening method self-adhesive For Retro-reflective sensors
	FTDR 047A048 Reflector rectangular 75 x 54 mm 제품번호: 10145961	Fastening method screw mounting For Retro-reflective sensors
	FTAR 013A000 Reflector round Ø 15 mm 제품번호: 10145963	Fastening method self-adhesive Micro structure For Retro-reflective sensors
	FTAR 019A000 Reflector round Ø 21 mm 제품번호: 11107543	Fastening method self-adhesive For Retro-reflective sensors
	FTAR 020A000 Reflector round Ø 25,2 mm 제품번호: 10138929	Fastening method self-adhesive Micro structure For Retro-reflective sensors
	FTAR 038A000 Reflector round Ø 46 mm 제품번호: 11006499	Fastening method self-adhesive For Retro-reflective sensors
	FTDF 020F020 Reflective tape rectangular 20 x 20 mm 제품번호: 10128299	Fastening method self-adhesive For laser light sensors
	Z-FTDF 050K0100 Reflective type rectangular 50 x 100 mm 제품번호: 11120355	Fastening method self-adhesive For Retro-reflective sensors

Peripherals

	CM50I.PN-11261571 제품번호: 11261571	IP67 field IO-Link Master 8 Ports, Class A/B, up to 4 A per port, 400 µs cycle time Industrial Ethernet: PROFINET IIoT: OPC UA, MQTT, JSON REST API
	CM50I.EC-11261572 제품번호: 11261572	IP67 field IO-Link Master 8 Ports, Class A/B, up to 4 A per port, 400 µs cycle time Industrial Ethernet: EtherCAT IIoT: OPC UA, MQTT, JSON REST API
	CM50I.EIP-11261573 제품번호: 11261573	IP67 field IO-Link Master 8 Ports, Class A/B, up to 4 A per port, 400 µs cycle time Industrial Ethernet: EtherNet/IP IIoT: OPC UA, MQTT, JSON REST API
	ZTEST-ALL.DIGITAL Test unit for sensors digital 제품번호: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital 제품번호: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)

Mounting accessories

	10150326 Sensofix series 10 / series 20 제품번호: 10150326	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-200.STRAIGHT Mounting bracket O200 제품번호: 11206601	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_L Mounting bracket O200 (L design) 제품번호: 11206602	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.ANGLE_S Mounting bracket O200 (S design) 제품번호: 11206603	Material: stainless steel Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
	ZADAP-200.SERIES10 Mounting bracket O200 - Retrofit for sensors series 10 제품번호: 11208477	Material: plastic