MAGRES EAM580R-SY - CANopen®/SAE J1939 | Absolute encoders

Encoder single- or multiturn / CANopen®/SAE J1939
E1 approval (KBA)
High protection IP 67
High resistance to shock and vibrations
Protection against corrosion CX (C5-M)
Wire cross section 0.5 mm²
Electronic gear function
Applicable up to PLd (ISO 13849)

기술 데이터

모두 표시

Technical data - electrical ratings

Voltage supply

10...30 VDC

Consumption typ.

20 mA (24 VDC, w/o load)

Initializing time

≤ 170 ms after power on

Interface

CANopen®
SAE J1939

Function

Multiturn
Singleturn

Profile conformity

CANopen® CiA communication profile DS 301, LSS profile DSP 305, device profile DS 406

Steps per revolution

≤16384 / 14 bit

Number of revolutions

≤262144 / 18 bit

Absolute accuracy

±0,15 ° (+20 ±15 °C)
±0,25 ° (-40...+85 °C)

Sensing method

Magnetic

Code sequence

CW: ascending values with clockwise sense of rotation (looking at flange)

Output stages

CAN-Bus, LV (3.3 V) compatible ISO 11898

Interference immunity

EN 61000-6-2
UN ECE R10

Emitted interference

EN 61000-6-4
UN ECE R10

MTTF_d (ISO 13849)

High (>100 years)
Use in safety functions exclusively based on Application Note and MTTFd reliability prediction (request separately).

Approval

UL approval / E217823
E1 approval (KBA)

Technical data - mechanical design

Size (flange)

ø58 mm

Shaft type

ø6 x 10 mm, solid shaft with flat

Flange

Synchro flange

Protection EN 60529

IP 67 (with shaft seal)

Operating speed

≤6000 rpm

Starting torque

≤2,5 Ncm (+20 °C, IP 67)

Moment of inertia

15,38 gcm²

Admitted shaft load

≤40 N axial
≤80 N radial

Material

Housing: steel, powder-coated
Flange: aluminium
Shaft: stainless steel

Corrosion protection

IEC 60068-2-52 Salt mist
for ambient conditions CX (C5-M) according to ISO 12944-2

Operating temperature

-40...+85 °C (see general information)

Relative humidity

95 %

Resistance

EN 60068-2-6
Vibration 30 g, 10-2000 Hz
EN 60068-2-27
Shock 500 g, 1 ms

Weight approx.

250 g

Connection

Flange connector M12, 5-pin
Cable 2 m

소프트웨어

모두 표시

Software

EAMxxx describing file EDS / CANopen
- (zip | 8 KB)
Baumer Sensor Suite
- (zip | 163 MB)

다운로드

모두 표시

Data sheet

Data sheet – EAM580R-SY - CANopen®/SAE J1939
- ZH (pdf | 1 MB)
Data sheet – EAM580R-SY - CANopen®/SAE J1939
- DE (pdf | 979 KB)
Data sheet – EAM580R-SY - CANopen®/SAE J1939
- EN (pdf | 947 KB)
Data sheet – EAM580R-SY - CANopen®/SAE J1939
- FR (pdf | 950 KB)

Quickstart

EAM580R - CANopen® / SAEJ1939
- DE/EN/FR/IT/ES/RU (pdf | 853 KB)

Software Manual

EAM360, EAM580 - CANopen
- EN (pdf | 1 MB)
EAM360, EAM580 - SAE J1939
- EN (pdf | 1020 KB)

Certificates / approvals

RoC / E1 approval - EAM580R
- DE/EN (pdf | 129 KB)

Brochures / Catalogs

Brochure – Magnetic absolute encoders EAM580 / EAM360
- DE (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- EN (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- FR (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- IT (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ES (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ZH (pdf | 1 MB)

Declaration of conformity

DoC / CoC - EAM580 / EAM580R
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 281 KB)

CAD

EAM580 / EAM580R: Solid shaft ø6 mm, cable radial, synchro flange, IP67
- (zip | 204 KB)
EAM580 / EAM580R: Solid shaft ø6 mm, M12 radial, synchro flange, IP67
- (zip | 191 KB)

부속품

모두 표시

Mounting accessories

	Clamp set ø15 mm 제품번호: 10252773	Set consists of three eccentric fixing
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft 제품번호: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft 제품번호: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=06 / D2=06) For encoder with solid shaft 제품번호: 11065916	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft 제품번호: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft 제품번호: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=06 / D2=06) For encoder with solid shaft 제품번호: 11069333	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft 제품번호: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Mounting adaptor For encoders with synchro flange 제품번호: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) 제품번호: 10117668	With 3x eccentric fixings, screws and nuts

Connectors and cables

	Female connector M12, 5-pin, straight, shielded, 2 m cable 제품번호: 11046264	Female connector M12, 5-pin, straight
	Female connector M12, 5-pin, straight, shielded, 5 m cable 제품번호: 11046266	Female connector M12, 5-pin, straight

Measuring wheels

	MR241.06D Small measuring wheel 제품번호: 11033278	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø6 mm
	MR261.06A Small measuring wheel 제품번호: 11033288	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø6 mm

맨 위로

Absolute encoders

MAGRES EAM580R-SY - CANopen®/SAE J1939

Solid shaft with synchro flange

기술 데이터

Technical data - electrical ratings

Technical data - mechanical design

소프트웨어

Software

다운로드

Data sheet

Quickstart

Software Manual

Certificates / approvals

Brochures / Catalogs

Declaration of conformity

CAD

부속품

Mounting accessories

Connectors and cables

Measuring wheels