HMG10-B - SSI | Absolute encoders | Baumer international

Magnetic sensing method
Function display via LEDs
Multiturn sensing with Energy Harvesting technology "MicroGen", without gear or battery
Two-sided bearing system with hybrid bearings
Special protection against corrosion CX (C5-M)

기술 데이터

모두 표시

Technical data - electrical ratings

Voltage supply

4.75...30 VDC

Short-circuit proof

Consumption w/o load

≤100 mA (SSI)

Initializing time

≤ 500 ms after power on

Interface

Function

Multiturn

Steps per revolution

1048576 / 20 bit

Number of revolutions

1048576 / 20 bit

Additional outputs

Square-wave TTL/HTL,TTL/RS422

Sensing method

Magnetic

Code

Gray or binary

Code sequence

CW (factory setting)

Input signals

SSI clock, PRESET, rotating direction

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-3

Diagnostic function

Function control

Status indicator

4 LEDs in device back side

Approval

CE
UL approval / E217823

Switching accuracy

± 2 % (or 1 Digit)

Switching outputs

1 output (Open collector, solid state relay on request)

Output switching capacity

30 VDC; ≤100 mA

Switching delay time

≤20 ms

Technical data - mechanical design

Size (flange)

ø105 mm

Shaft type

ø16...20 mm (blind hollow shaft)
ø17 mm (cone shaft 1:10)

Flange

Support plate, 360° freely positionable

Protection EN 60529

IP 66 / IP 67

Operating speed

≤12000 rpm

Range of switching speed

ns (off) = ±2...12000 rpm

Operating torque typ.

10 Ncm

Rotor moment of inertia

950 gcm²

Admitted shaft load

≤450 N axial
≤650 N radial

Material

Housing: aluminium alloy
Shaft: stainless steel

Corrosion protection

IEC 60068-2-52 Salt mist
for ambient conditions CX (C5-M) according to ISO 12944-2

Operating temperature

-40...+95 °C

Relative humidity

95 % non-condensing

Resistance

IEC 60068-2-6
Vibration 30 g, 10-2000 Hz
IEC 60068-2-27
Shock 400 g, 1 ms

Weight approx.

1,6 kg (depending on version)

Connection

Terminal box
Flange connector M23

다운로드

모두 표시

Data sheet

Data sheet – HMG10-B - SSI
- ZH (pdf | 1 MB)
Data sheet – HMG10-B - SSI
- FR (pdf | 1 MB)
Data sheet – HMG10-B - SSI
- DE (pdf | 1 MB)
Data sheet – HMG10-B - SSI
- EN (pdf | 1 MB)

CAD

HMG10 SSI, blind hollow shaft ø16 mm, 2x terminal box with cable gland M20 (HMG10x-BHx.6Mxx.xxxxxx)
- (zip | 477 KB)

부속품

모두 표시

Mounting accessories

	Torque arm M6, length 67...70 mm 제품번호: 11043628	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 67...70 mm
	Torque arm M6, length 120...130 mm (≥71 mm) 제품번호: 11004078	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Standard version Length 120...130 mm Can be shortened to ≥71 mm
	Torque arm M6 insulated, length 67...70 mm 제품번호: 11054917	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 67...70 mm
	Torque arm M6 insulated, length 120...130 mm (≥71 mm) 제품번호: 11072795	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 120...130 mm Can be shortened to ≥71 mm
	Torque arm M6 insulated, length 425...460 mm (≥131 mm) 제품번호: 11082677	Torque arm for hollow shaft encoder Swivel joints size M6 according to DIN ISO 12240-4, size series K Compensate for mounting tolerances of the drive shaft in an axial direction Insulated version Length 425...460 mm Can be shortened to ≥131 mm
	Mounting kit for torque arm size M6 and earthing strap 제품번호: 11077197	Mounting kit for fixing a torque arm size M6 and an earthing strap.
	Mounting and dismounting set 제품번호: 11077087	Mounting and dismounting set for fixing a blind hollow shaft encoder to the drive shaft and for dismounting the encoder from the drive shaft.

Connectors and cables

	Sensor cable for encoders HEK 8	The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
	Sensor cable for encoders HEK 17	The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634. The cable can be supplied in any length and pre-fitted with various connectors.
	Mating connector M23, solder version, 12-pin, CCW 제품번호: 11068577	Mating connector M23 in solder version (12-pin, female, CCW) for cable connection to the flange connector M23 (12-pin, male, CW).
	Mating connector M23, solder version, 17-pin, CCW 제품번호: 11068551	Mating connector M23 in solder version (17-pin, female , CCW) for cable connection to the flange connector M23 (17-pin, male , CW).
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 1 m 제품번호: 11172482	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, lenght 1 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 3 m 제품번호: 11172481	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 3 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 5 m 제품번호: 11172499	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 5 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 10 m 제품번호: 11172580	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 10 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (17 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 3 m 제품번호: 11172463	Mating connector M23 (17-pin, 17 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 3 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.