PMG10 - SSI | Absolute encoders | Baumer international

Magnetic sensing method
Function display via LEDs
Multiturn sensing with Energy Harvesting technology "MicroGen", without gear or battery
Two-sided bearing system with hybrid bearings
Special protection against corrosion CX (C5-M)

기술 데이터

모두 표시

Technical data - electrical ratings

Voltage supply

4.75...30 VDC

Short-circuit proof

Consumption w/o load

≤100 mA (SSI)

Initializing time

≤ 500 ms after power on

Interface

Function

Multiturn

Steps per revolution

1048576 / 20 bit

Number of revolutions

1048576 / 20 bit

Additional outputs

Square-wave TTL/HTL,TTL/RS422

Sensing method

Magnetic

Code

Gray or binary

Code sequence

CW (factory setting)

Input signals

SSI clock, PRESET, rotating direction

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-3

Diagnostic function

Function control

Status indicator

4 LEDs in device back side

Approval

CE
UL approval / E217823

Switching accuracy

± 2 % (or 1 Digit)

Switching outputs

1 output (Open collector, solid state relay on request)

Output switching capacity

30 VDC; ≤100 mA

Switching delay time

≤20 ms

Technical data - mechanical design

Size (flange)

ø115 mm

Shaft type

ø11 mm solid shaft

Flange

EURO flange B10
Housing foot B3

Protection EN 60529

IP 66 / IP 67

Operating speed

≤12000 rpm

Range of switching speed

ns (off) = ±2...12000 rpm

Operating torque typ.

10 Ncm

Rotor moment of inertia

1 kgcm²

Admitted shaft load

≤450 N axial
≤650 N radial

Material

Housing: aluminium alloy
Shaft: stainless steel

Corrosion protection

IEC 60068-2-52 Salt mist
for ambient conditions CX (C5-M) according to ISO 12944-2

Operating temperature

-40...+95 °C

Relative humidity

95 % non-condensing

Resistance

IEC 60068-2-6
Vibration 30 g, 10-2000 Hz
IEC 60068-2-27
Shock 400 g, 1 ms

Weight approx.

1,9 kg (depending on version)

Connection

Terminal box
Flange connector M23

다운로드

모두 표시

Data sheet

Data sheet – PMG10 - SSI
- ZH (pdf | 1 MB)
Data sheet – PMG10 - SSI
- FR (pdf | 1 MB)
Data sheet – PMG10 - SSI
- DE (pdf | 1 MB)
Data sheet – PMG10 - SSI
- EN (pdf | 1 MB)

CAD

PMG10 SSI, solid shaft ø11 mm with EURO flange B10, 2x terminal box with cable gland M20 (PMG10x-SHx.1MUx.xxxxxx)
- (zip | 404 KB)

부속품

모두 표시

Mounting accessories

	Spring disk coupling K 35 (shaft ø6...12 mm)	High quality torsionally stiff and backlash free coupling Compensating of mounting errors Balanced torsional rigidity (torsional spring constant) Protection against shaft currents with an insulated hub on non-drive end (ø11 H7) Additional key possible
	Spring disk coupling K 50 (shaft ø11...16 mm)	High quality torsionally stiff and backlash free coupling Compensating of mounting errors Balanced torsional rigidity (torsional spring constant) Protection against shaft currents with an insulated hub on non-drive end (ø11 H7) Additional key possible
	Spring disk coupling K60 WD 11PF4 + 12PF4 For encoder with solid shaft 제품번호: 11064874	High quality torsionally stiff and backlash free coupling Compensating of mounting errors Balanced torsional rigidity (torsional spring constant) Additional key possible

Connectors and cables

	Sensor cable for encoders HEK 8	The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
	Sensor cable for encoders HEK 17	The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634. The cable can be supplied in any length and pre-fitted with various connectors.
	Mating connector M23, solder version, 12-pin, CCW 제품번호: 11068577	Mating connector M23 in solder version (12-pin, female, CCW) for cable connection to the flange connector M23 (12-pin, male, CW).
	Mating connector M23, solder version, 17-pin, CCW 제품번호: 11068551	Mating connector M23 in solder version (17-pin, female , CCW) for cable connection to the flange connector M23 (17-pin, male , CW).
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 3 m 제품번호: 11172481	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 3 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 5 m 제품번호: 11172499	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 5 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 10 m 제품번호: 11172580	Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 10 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.
	Mating connector M23 (17 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 3 m 제품번호: 11172463	Mating connector M23 (17-pin, 17 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 3 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634.