MAGRES EAM580-SY - SSI | Encoder assoluti

Encoder single- or multiturn / SSI
Precise magnetic sensing
Resolution max. 32 bit (14 bit ST, 18 bit MT)
Angular accuracy up to ±0.15°
Additional incremental signals
High protection up to IP 67
High resistance to shock and vibrations

disponibilità su richiesta

Dati tecnici

mostra tutti

Dati tecnici - Valori elettrici

Tensione operativa

4.5…30 VDC (SSI, SSI + TTL/RS422)
5.5…30 VDC (SSI + HTL/Push-pull)

Tip. corrente operativa

60 mA (5 VDC, w/o load)
20 mA (24 VDC, w/o load)

Initializing time

≤ 170 ms after power on

Data currency

Typ. 2 µs (cyclic request)

Interface

SSI
SSI + incremental

Function

Multiturn
Singleturn

Operating mode

Linear feedback shift register (on request)

Steps per revolution

≤16384 / 14 bit

Number of revolutions

≤262144 / 18 bit

Absolute accuracy

±0,15 ° (+20 ±15 °C)
±0,25 ° (-40...+85 °C)

Principio di scansione

Magnetic

Code

Gray or binary

Code sequence

CW: ascending values with clockwise sense of rotation (looking at flange)

Inputs

SSI clock: Linereceiver RS422
Zero setting input
Counting direction

Livelli di uscita

SSI data: Linedriver RS422
Incremental: linedriver RS422 or push-pull (option)

Incremental output

1024, 2048, 4096 ppr (other on request)

Segnale di uscita

A+, A-, B+, B-

Frequenza di uscita

≤350 kHz

Immunità alle interferenze

EN 61000-6-2

Emissione di interferenze

EN 61000-6-4

Diagnostic function

DATAVALID (on request)

Approvazione

UL approval / E217823

Dati tecnici - progettazione meccanica

Grandezza (flangia)

ø58 mm

Tipo di albero

ø6 x 10 mm, solid shaft with flat

Flangia

Synchro flange

Classe di protezione EN 60529

IP 65 (without shaft seal)
IP 67 (with shaft seal)

Velocità operativa

≤6000 rpm

Coppia di spunto

≤2 Ncm (+20 °C, IP 65)
≤2,5 Ncm (+20 °C, IP 67)

Moment of inertia

15,38 gcm²

Carico dell‘albero massimo ammesso

≤40 N assiale
≤80 N radiale

Materiale

Housing: steel zinc-coated
Flange: aluminium
Albero: acciaio inox

Temperatura operativa

-40...+85 °C (see general informations)

Relative humidity

95 %

Resistenza

EN 60068-2-6
Vibrazione 30 g, 10-2000 Hz
EN 60068-2-27
Urti 500 g, 1 ms

Peso ca.

250 g

Allacciamento

Flange connector M12, 8-pin
Flange connector M12, 12-pin
Flange connector M23, 12-pin
Cable 2 m

Scaricare

mostra tutti

Data sheet

Schede tecniche – EAM580-SY - SSI
- DE (pdf | 1 MB)
Schede tecniche – EAM580-SY - SSI
- EN (pdf | 1 MB)
Schede tecniche – EAM580-SY - SSI
- FR (pdf | 1 MB)
Schede tecniche – EAM580-SY - SSI
- ZH (pdf | 1 MB)

Quickstart

EAM580 - SSI
- DE/EN/FR/IT/ES (pdf | 903 KB)

Brochures / Catalogs

Brochure – Magnetic absolute encoders EAM580 / EAM360
- DE (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- EN (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- FR (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- IT (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ES (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ZH (pdf | 1 MB)

Declaration of conformity

DoC / CoC - EAM580 / EAM580R
- DE/EN/FR (pdf | 281 KB)

CAD

EAM580 / EAM580R: Solid shaft ø6 mm, cable radial, synchro flange, IP65
- STEP (zip | 200 KB)
EAM580 / EAM580R: Solid shaft ø6 mm, cable radial, synchro flange, IP67
- STEP (zip | 204 KB)
EAM580 / EAM580R: Solid shaft ø6 mm, M12 radial, synchro flange, IP65
- STEP (zip | 190 KB)
EAM580 / EAM580R: Solid shaft ø6 mm, M12 radial, synchro flange, IP67
- STEP (zip | 191 KB)
EAM580: Solid shaft ø6 mm, M23 radial, synchro flange, IP65
- STEP (zip | 741 KB)
EAM580: Solid shaft ø6 mm, M23 radial, synchro flange, IP67
- STEP (zip | 747 KB)

Accessori

mostra tutti

Accessori di montaggio

	Clamp set ø10 mm Articolo n..: 10106004	Set consists of three eccentric fixing
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Articolo n..: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=06 / D2=06) For encoder with solid shaft Articolo n..: 11065916	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Articolo n..: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft Articolo n..: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=06 / D2=06) For encoder with solid shaft Articolo n..: 11069333	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Mounting adaptor For encoders with synchro flange Articolo n..: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Articolo n..: 10117668	With 3x eccentric fixings, screws and nuts

Connettori e cavi

	Female connector M12, 8-pin, straight, without cable Articolo n..: 10146775
	Female connector M23, 12-pin, straight, without cable Articolo n..: 10116717
	Female connector M12, 12-pin, straight, without cable Articolo n..: 11078614	Female connector M12 with screwable nut With or without cable (shielded) in different lengths
	Female connector M12, 12-pin, straight, shielded, 2 m cable (ESG 34JP0200G) Articolo n..: 11048452	Female connector M12 with screwable nut With or without cable (shielded) in different lengths
	Female connector M12, 12-pin, straight, shielded, 10 m cable (ESG 34JP1000G) Articolo n..: 11048455	Female connector M12 with screwable nut With or without cable (shielded) in different lengths
	Female connector M23, 12-pin, CW, with cable 1 m Articolo n..: 11095302	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 1 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 2 m Articolo n..: 11100408	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 2 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 5 m Articolo n..: 11100430	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 5 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 10 m Articolo n..: 11100431	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 10 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)

Measuring wheels

	MR241.06D Small measuring wheel Articolo n..: 11033278	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø6 mm
	MR261.06A Small measuring wheel Articolo n..: 11033288	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø6 mm

In alto

Encoder assoluti

MAGRES EAM580-SY - SSI

Solid shaft with synchro flange

Dati tecnici

Dati tecnici - Valori elettrici

Dati tecnici - progettazione meccanica

Scaricare

Data sheet

Quickstart

Brochures / Catalogs

Declaration of conformity

CAD

Accessori

Accessori di montaggio

Connettori e cavi

Measuring wheels