MAGRES EAM580-SC - CANopen® | Encoder assoluti

Encoder single- or multiturn / CANopen®
Precise magnetic sensing
Angular accuracy up to ±0.15°
Additional incremental signals
High protection up to IP 67
High resistance to shock and vibrations
Electronic gear function

disponibilità su richiesta

Dati tecnici

mostra tutti

Dati tecnici - Valori elettrici

Tensione operativa

10...30 VDC

Tip. corrente operativa

20 mA (24 VDC, w/o load)

Initializing time

≤ 170 ms after power on

Data currency

<1 ms

Interface

CANopen®
CANopen®-Lift
CANopen® + incremental

Function

Multiturn
Singleturn

Profile conformity

CANopen® CiA communication profile DS 301, LSS profile DSP 305, device profile DS 406, DS 417

Steps per revolution

≤16384 / 14 bit

Number of revolutions

≤262144 / 18 bit

Absolute accuracy

±0,15 ° (+20 ±15 °C)
±0,25 ° (-40...+85 °C)

Principio di scansione

Magnetic

Code sequence

CW: ascending values with clockwise sense of rotation (looking at flange)

Livelli di uscita

CAN-Bus, LV (3.3 V) compatible ISO 11898
Incremental: linedriver RS422 or push-pull (option)

Incremental output

1024, 2048, 4096 ppr (other on request)

Segnale di uscita

A+, A-, B+, B-

Frequenza di uscita

≤350 kHz

Immunità alle interferenze

EN 61000-6-2

Emissione di interferenze

EN 61000-6-4

Approvazione

UL approval / E217823

Dati tecnici - progettazione meccanica

Grandezza (flangia)

ø58 mm

Tipo di albero

ø10 x 20 mm, solid shaft with flat

Flangia

Clamping flange

Classe di protezione EN 60529

IP 65 (without shaft seal)
IP 67 (with shaft seal)

Velocità operativa

≤6000 rpm

Coppia di spunto

≤2 Ncm (+20 °C, IP 65)
≤2,5 Ncm (+20 °C, IP 67)

Moment of inertia

15,38 gcm²

Carico dell‘albero massimo ammesso

≤40 N assiale
≤80 N radiale

Materiale

Housing: steel zinc-coated
Flange: aluminium
Albero: acciaio inox

Temperatura operativa

-40...+85 °C (see general informations)

Relative humidity

95 %

Resistenza

EN 60068-2-6
Vibrazione 30 g, 10-2000 Hz
EN 60068-2-27
Urti 500 g, 1 ms

Peso ca.

250 g

Allacciamento

Flange connector M12, 5-pin
Flange connector M12, 8-pin
Cable 2 m

software

mostra tutti

Software

EAMxxx describing file EDS / CANopen
- Download (zip | 8 KB)
Baumer Sensor Suite
- (zip | 163 MB)

Scaricare

mostra tutti

Data sheet

Schede tecniche – EAM580-SC - CANopen®
- ZH (pdf | 1 MB)
Schede tecniche – EAM580-SC - CANopen®
- DE (pdf | 1 MB)
Schede tecniche – EAM580-SC - CANopen®
- EN (pdf | 1 MB)
Schede tecniche – EAM580-SC - CANopen®
- FR (pdf | 1 MB)

Quickstart

EAM580 - CANopen®
- DE/EN/FR/IT/ES (pdf | 858 KB)

Software Manual

EAM360, EAM580 - CANopen
- EN (pdf | 1 MB)
EAM360, EAM580 - CANopen Lift
- EN (pdf | 616 KB)

Brochures / Catalogs

Brochure – Magnetic absolute encoders EAM580 / EAM360
- DE (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- EN (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- FR (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- IT (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ES (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ZH (pdf | 1 MB)

Declaration of conformity

DoC / CoC - EAM580 / EAM580R
- DE/EN/FR (pdf | 281 KB)

CAD

EAM580 / EAM580R: Solid shaft ø10 mm, cable radial, clamping flange, IP65
- STEP (zip | 197 KB)
EAM580 / EAM580R: Solid shaft ø10 mm, cable radial, clamping flange, IP67
- STEP (zip | 200 KB)
EAM580: Solid shaft ø10 mm, M23 radial, clamping flange, IP65
- STEP (zip | 738 KB)
EAM580 / EAM580R: Solid shaft ø10 mm, M12 radial, clamping flange, IP67
- STEP (zip | 190 KB)

Accessori

mostra tutti

Accessori di montaggio

	Double loops coupling (D1=10 / D2=10) For encoder with solid shaft Articolo n..: 11101781	Thermally and electrically isolated Absorbing shocks and vibration Excellent compensation of radial, lateral and angular misalignments Medium torsional stiffness Low restoring forces Maintenance-free
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Articolo n..: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=10) For encoder with solid shaft Articolo n..: 11065923	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Articolo n..: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=10) For encoder with solid shaft Articolo n..: 10141133	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=10) For encoder with solid shaft Articolo n..: 11069340	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Bellows coupling (D1=10 / D2=10) For encoder with solid shaft Articolo n..: 11053277	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Spring encoder arm Articolo n..: 11101893	Tether arm for Ø58 mm with clamping flange Optimal for use encoders with measuring wheel Virtually any contact pressure adjustable Versatile mounting options
	Mounting adaptor For encoders with clamping flange Articolo n..: 10125051	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount

Connettori e cavi

	Female connector M12, 5-pin, straight, shielded, 2 m cable Articolo n..: 11046264	Female connector M12, 5-pin, straight
	Female connector M12, 5-pin, straight, shielded, 5 m cable Articolo n..: 11046266	Female connector M12, 5-pin, straight
	Cable with male/female M12, 5-pin, straight, A-coded, 2 m (ESG 34C/KSG34C) Articolo n..: 11201509	Male/female connector M12x1, axial Cable (shielded) in different lengths Cable for flexible cable carriers Halogen-free Oil-resistant UL/cUL certification
	Cable with male/female M12, 5-pin, straight, A-coded, 5 m (ESG 34C/KSG34C) Articolo n..: 11201520	Male/female connector M12x1, axial Cable (shielded) in different lengths Cable for flexible cable carriers Halogen-free Oil-resistant UL/cUL certification

Measuring wheels

	MR752.10A Small measuring wheel Articolo n..: 11011440	Circumference 30.48 cm Surface profile: Smooth Surface material: Polyurethan Bore ø10 mm
	MR241.10D Small measuring wheel Articolo n..: 11033281	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø10 mm
	MR261.10A Small measuring wheel Articolo n..: 11033290	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø10 mm
	MR291.10D Small measuring wheel Articolo n..: 11033300	Circumference 20 cm Surface profile: Knurled Surface material: Hytrel TPE-E Bore ø10 mm
	MR512.10A Large measuring wheel Articolo n..: 11033308	Circumference 50 cm Surface profile: Cross-knurled Surface material: Aluminium Bore ø10 mm
	MR552.10A Large measuring wheel Articolo n..: 11033323	Circumference 50 cm Surface profile: Smooth Surface material: Polyurethan Bore ø10 mm
	MR562.10A Large measuring wheel Articolo n..: 11033329	Circumference 50 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø10 mm
	MR542.10D Large measuring wheel Articolo n..: 11038480	Circumference 50 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø10 mm
	MR592.10D Large measuring wheel Articolo n..: 11038481	Circumference 50 cm Surface profile: Knurled Surface material: Hytrel TPE-E Bore ø10 mm