VS XC900M20X00IP

Articolo n..: 11700455

Universal Robots+ Certified (UR+) for UR3e, UR5e, UR10e, UR16e
PROFINET and EtherNet/IP interface integrated
FEX image processor
FEXLoc 360° part location
Flexible result conjunction
VeriFlash flash controller integrated
VeriSens XC Tube included in delivery
Download VeriSens Application Suite: www.baumer.com/vs-sw

disponibilità su richiesta

Dati tecnici

mostra tutti

Dati generali

Resolution

1600 × 1200 px

Sensor type

1/1.8″ CCD, monochrome

Illumination

external, available as accessory

Illumination connection

direct (integrated VeriFlash^® flash controller)

High-resolution mode

max. 21 inspections per second

High-speed mode (limited resolution)

max. 35 inspections per second

Number of jobs (products)

≤ 255

Features per job

Signal processing

Baumer FEX^® 4.0

Defect image memory

Lens

C-mount

Dati elettrici

Nominal voltage power supply

24 V ±25 %

Nominal voltage power supply (add-on)

Class 2 according to NEC / protection class III

Nominal voltage power supply (info)

The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC.

Power consumption

Max. 42 W (with I/O and lighting)

Inputs

8 … 30 V (polarity protected)

Digital inputs

5 inputs
trigger
job selection
external teach-in
encoders (CH-A, CH-B) 500 kHz

Outputs

PNP I_peak = 100 mA and I_eff = 50 mA (short-circuit proof)

Digital outputs

5 outputs
Pass / Fail
Flash Sync
Alarm
Camera Ready
Output Enable

Initial setup

Ethernet (10BASE-T / 100BASE-TX)

Process interface

PROFINET (CC-A)
EtherNet/IP^™
TCP/UDP (Ethernet)
Universal Robot Mode

Visualization

configurable web interface with MultiViewer function

Dati meccanici

Width

53 mm (without lens/tube)

Height

99,5 mm (without lens/tube)

Depth

49,8 mm (without lens/tube)

Weight

≤ 300 g (without lens/tube)

Material

housing: aluminum
cover glass XC tube: PMMA

Condizioni ambientali

Operating temperature

+5 … +55 °C @ T = measurement point

Storage temperature

-20 … +70 °C

Humidity

0 … 90 % (non-condensing)

Protection class

IP 67 (with tube)

Vibration load

IEC 60068-2-6
IEC 60068-2-64

Mechanical shock resistance

EN 60068-2-27

Barcode

2/5 Industrial
2/5 Interleaved
Codabar
Code 39
Code 93
Code 128
PharmaCode
EAN 8
EAN 13
UPC-A
UPC-E
GS1 DataBar
GS1 128

Matrix code

DataMatrix (ECC 200)
GS1-DataMatrix
QR-Code
PDF417

Font

Sans serif fonts (e.g.: OCR-A,OCR-B, Arial, Tahoma, Courier, Univers, Frutiger, Verdana, Bookman, Franklin Gothic Book, Garamond, Nimbus San T, Palatino, Linotype, Sylfaen, Times New Roman, DIN 1451 Mittelschrift, DIN Neuzeit Grotesk LT Light, ITC Officina Sans, LT Book, Farrington 7B etc.)
Dot Print
Characters: A-Z a-z 0-9 + - . : / ( )

Part location

Part location on contours
Part location on edges
Part location on circle
Part location on text line

Geometry

Distance
circle
angle
count edges
point position
edge characteristics

Feature comparison

count contour points
contour comparison
brightness
contrast
area size
count areas
pattern comparison
find object positions

Identification

Barcode
Matrix code
Text

Voltage

12 V DC or 24 V DC (permanent)
24 V DC or 48 V DC (pulsed)

Current

I_max = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C)
I_max = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C)

Flash time

max. 1 ms (Duty Cycle max. 1:10)

Conformità

Conformity

CE
RoHS
UL recognized
KC (R-R-BkR-VeriSens-XC-IP)

Flash memory size

2000 Mbit Flash S34ML02G100BHI0000

software

mostra tutti

Software packages

VeriSens Application Suite v2.11.0 (Windows)
- Download
VeriSens URCap v1.1.14
- Download
VeriSens S7 Function Library
- Richiedi pacchetto
Verisens PROFINET GSD
- Download
Verisens EtherNet/IP EDS
- Download

Software

Baumer VeriSens Lens Tool v2.3.6
- EN (zip | 223 KB)

Scaricare

mostra tutti

Data sheet

Schede tecniche – VS XC900M20X00IP
- EN (pdf | 1 MB)
Schede tecniche – VS XC900M20X00IP
- DE (pdf | 1 MB)

Quickstart

Quick Start Guide VeriSens vision sensors
- EN/DE/FR/IT/ES/ZH/KO/TH/JP (pdf | 7 MB)

Operating Manual

Technical documentation VeriSens ID / CS / XF / XC

Certificates / approvals

CE certification
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 172 KB)
KC registration
- KO/EN (pdf | 1 MB)
UL certification
- EN (pdf | 525 KB)

Application notes

Application Notes
- Link

CAD

- (zip | 1 MB)

Disegni

mostra tutti

Accessori

mostra tutti

Power supply

Power Supply 24V/1.0A Int. DC Connector

Articolo n..: 11079750

power supply 24V/1,0A with adapters for EU, US, UK AU, KR
in combination with "Cable power adapter M12/DC connector" (11048083) suitable for VCXG.I(.XT), VLXT, VAX and VeriSens

Starter Kit

VeriSens UR Starter Kit

Articolo n..: 11700552

confectioned connection cable M12/12-pin with power supply 24V/1000mA
Ethernet cable
90° angled fixation bracket incl. screws
screw driver
Application Suite (Windows^®) via Download
VeriSens^® not included
available

Panel PC

ZVS-USB Stick URCap

Articolo n..: 11700543

Panel PC for VeriSens^® incl. stylus
English operating system
available

Lens accessories

	ZVT-Calibration SmartGrid 200x150mm 5mm Articolo n..: 11700544	Ricoh polarization filter linear filter thread M30.5 available
	ZVT-Calibration SmartGrid 300x200mm 10mm Articolo n..: 11700548	Ricoh polarization filter linear filter thread M30.5 available
	ZVF-Filter Holder Mounting Tool Articolo n..: 11177601	Mounting tool to screw in filter holders
	Filter <780nm block 1“-32 H2,5mm Articolo n..: 11095023	daylight blocking filter up to 780nm screwable into C-mount housing (independend from lens)
	Set Filter <780nm block 1"-32 H2,5mm Articolo n..: 11097576	daylight blocking filter up to 780nm screwable into C-mount housing (independend from lens) set with screw-in tool
	Filter IR block 1''-32 H2,5mm Articolo n..: 11095022	IR - blocking filter, C-mount screwable into C-mount housing (independend from lens)
	Filter CL/27 (R2) ROT PENTAX Articolo n..: 11006551	Ricoh color filter (red)
	Filter Pol PENTAX PL27 Articolo n..: 11092000	Ricoh polarization filter linear filter thread
	ZVI-FILTER POL. PL30.5 C91353 Articolo n..: 11175428	Ricoh polarization filter linear filter thread M30.5
	ZVI-Filter Pol. PL40.5 C91301 Articolo n..: 11167713	Ricoh polarization filter linear filter thread M40.5
	Close-up ring set ZVS-FP-RGST six-piece Articolo n..: 11010529	Close-up ring set ZVS-FP-RGST six-piece 0,5, 1, 5, 10, 20, 40 mm
	XC Tube Articolo n..: 11088325	lens protection for C-mount lenses Optional XC Tube extension with XC Tube Module 6mm (11115649) or XC Tube Module (11089149), length 12 mm. Use of several Tube Modules possible. thread: M47 length 44 mm
	XC Tube Module 6mm Articolo n..: 11115649	modular extension of the lens protection of C-mount lenses thread: M47 length 6 mm
	XC Tube Module 12 mm Articolo n..: 11089149	modular extension of the lens protection of C-mount lenses thread: M47 length 12 mm

Lens

	Obj CITRINE 1,4/17 C Articolo n..: 10170041	Schneider Kreuznach lens 17 mm F 1,4-11 format 2/3" M.O.D. 0,16 m C-mount
	Obj CITRINE 1,4/23 C Articolo n..: 11035165	Schneider Kreuznach lens 23 mm F 1,4-11 format 2/3" M.O.D. 0,211 m C-mount
	Obj TOURMALINE 2,8/50 C Articolo n..: 11037739	Schneider Kreuznach lens 50 mm F 2,8-16 format 1.3" M.O.D. 0,135 m C-mount
	Obj CITRINE 1,8/4,8 C Articolo n..: 11035760	Schneider Kreuznach lens 4,8 mm F 1,8-8 format 2/3" M.O.D. 0,037 m C-mount
	Obj CITRINE 1,4/8 C Articolo n..: 11035932	Schneider Kreuznach lens 8 mm F 1.4-8 format 2/3" M.O.D. 0.072 m C-mount
	Obj TURQUOISE 1,9/10 C Articolo n..: 11037743	Schneider Kreuznach lens 10 mm F 1,9-16 format 1" M.O.D. 0,092 m C-mount
	Obj CITRINE 1,4/12 C Articolo n..: 10170038	Schneider Kreuznach lens 12 mm F 1,4-11 format 2/3" M.O.D. 0,614 m C-mount
	Obj TURQUOISE 1,8/16 C Articolo n..: 11076106	Schneider Kreuznach lens 16 mm F 1,8-22 format 1" M.O.D. 0,155 m C-mount
	Obj LINOS MeVis C 25mm/f1,6 Articolo n..: 11051404	Linos lens 25 mm F 1,6-16 format 1" M.O.D. 0,26 m C-mount
	ZVL-LM6HC Articolo n..: 11215056	Kowa lens 6 mm F 1,8-16 format 1" M.O.D. 0,1 m C-mount
	Obj Kowa LM8HC 8mm/f1,4 Articolo n..: 11092599	Kowa lens 8 mm F 1,4-16 format 1" M.O.D. 0,1 m C-mount
	Obj Kowa LM12HC 12mm/f1,4 Articolo n..: 11092600	Kowa lens 12,5 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	Obj Kowa LM16HC 16mm/f1,4 Articolo n..: 11092601	Kowa lens 16 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	Obj Kowa LM25HC 25mm/f1,4 Articolo n..: 11092602	Kowa lens 25 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	Obj Kowa LM35HC 35mm/f1,4 Articolo n..: 11143330	Kowa lens 35 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount
	Obj Kowa LM50HC 50mm/f1,4 Articolo n..: 11143331	Kowa lens 50 mm F 1,4-16 format 1" M.O.D. 0,5 m C-mount
	Obj Kowa LM12HC-SW 12,5mm/f1,4 Articolo n..: 11097919	Kowa lens 12,5 mm F 1,4-16 format 1" locating screw for aperture and focus via RS485 interface M.O.D. 0,9 m C-mount
	Obj Kowa LM25HC-SW 25mm/f1,4 Articolo n..: 11092603	Kowa lens 25 mm F 1,4-16 format 1" M.O.D. 0,3 m SWIR optimized C-mount
	Obj Kowa LM35HC-SW 35mm/f1,4 Articolo n..: 11092605	Kowa lens 35 mm F 1,4-16 format 1" M.O.D. 0,4 m SWIR optimized C-mount
	Obj Kowa LM50HC-SW 50mm/f1,4 Articolo n..: 11087250	Kowa lens 50mm F1,4-16 format 1" M.O.D. 0,6 m SWIR optimized C-mount
	Obj Kowa LM8JCM 8mm/f1,4 Articolo n..: 11092788	Kowa lens 8 mm F 1,4 format 2/3" M.O.D. 0,1 m C-mount
	Obj Kowa LM8JC10M 8,5mm/1,8 Articolo n..: 11091819	Kowa lens 8,5 mm F 1,6-22 format 2/3" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-LM3NCM 3,5mm/f2,4 Articolo n..: 11116658	Kowa lens 3,5 mm F 2,4-14 format 1/1.8'' M.O.D. 0,1 m C-mount
	ZVL-FL-CC0814A-2M Articolo n..: 11150223	Ricoh Imaging lens 8 mm F 1,4-16 format 2/3" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-CC1214A-2M Articolo n..: 11150226	Ricoh Imaging lens 12 mm F 1,4-16 format 2/3" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-CC1614A-2M Articolo n..: 11150228	Ricoh Imaging lens 16 mm F 1,4-16 format 2/3" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-CC2514A-2M Articolo n..: 11150229	Ricoh Imaging lens 25 mm F 1,4-16 format 2/3" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-CC5024A-2M Articolo n..: 11150230	Ricoh Imaging lens 50 mm F 2,4-22 format 2/3" M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-FL-CC1614-2M Articolo n..: 10170039	Ricoh Imaging lens 16 mm F 1,4-16 format 2/3" M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-FL-CC2514-2M Articolo n..: 11002222	Ricoh Imaging lens 25 mm F 1,4-16 format 2/3" M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-FL-CC3516-2M Articolo n..: 11003417	Ricoh Imaging lens 35 mm F 1,6-16 format 2/3" M.O.D. 0,35 m locating screw for aperture and focus C-mount
	ZVL-FL-CC5028-2M Articolo n..: 11012785	Ricoh Imaging lens 50 mm F 2,8-22 format 2/3" M.O.D. 0,9 m locating screw for aperture and focus C-mount
	ZVL-FL-CC7528-2M Articolo n..: 11003041	Ricoh Imaging lens 75 mm F 2,8 32 format 2/3" M.O.D. 0,7 m locating screw for aperture and focus C-mount
	ZVL-FL-BC1220-9M Articolo n..: 11201119	Ricoh Imaging lens 12 mm F 2.0-16 format 1,1" M.O.D. 0.08 m locating screw for aperture and focus C-mount
	ZVL-FL-BC1618-9M Articolo n..: 11201121	Ricoh Imaging lens 16 mm F 1.8-16 format 1,1" M.O.D. 0.08 m locating screw for aperture and focus C-mount
	ZVL-FL-BC2518-9M Articolo n..: 11154325	Ricoh Imaging lens 25 mm F 1,8-16 format 1,1" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-BC3518-9M Articolo n..: 11154326	Ricoh Imaging lens 35 mm F 1,6-16 format 1,1" M.O.D. 0,15 m locating screw for aperture and focus C-mount
	ZVL-FL-BC5024-9M Articolo n..: 11154327	Ricoh Imaging lens 50 mm F 2,4-22 format 1,1" M.O.D. 0,2 m locating screw for aperture and focus C-mount
	ZVL-FL-BC7528-9M Articolo n..: 11154328	Ricoh Imaging lens 75 mm F 2,8-32 format 1,1" M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-V0828-MPY Articolo n..: 11181608	Computar lens 8 mm F 2,8-16 format 1,1" M.O.D. 0,2 m locating screw for aperture and focus C-mount
	ZVL-V1228-MPY Articolo n..: 11181609	Computar lens 12 mm F 2,8-16 format 1,1" M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-V1628-MPY Articolo n..: 11181640	Computar lens 16 mm F 2,8-16 format 1,1" M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-V2528-MPY Articolo n..: 11181641	Computar lens 25 mm F 2,8-16 format 1,1" M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-V3528-MPY Articolo n..: 11181642	Computar lens 35 mm F 2,8-16 format 1,1" M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-V5028-MPY Articolo n..: 11181643	Computar lens 50 mm F 2,8-16 format 1,1" M.O.D. 0,55 m locating screw for aperture and focus C-mount
	ZVL-LM6FC24M Articolo n..: 11700795	Kowa lens 6,5 mm F 2,5-16 format 1,1" M.O.D. 0,1 m C-mount
	ZVL-LM8FC24M Articolo n..: 11700796	Kowa lens 8,5 mm F 2,5-16 format 1,1" M.O.D. 0,1 m C-mount
	ZVL-LM12FC24M Articolo n..: 11700791	Kowa lens 12 mm F 1,8-16 format 1,1" M.O.D. 0,1 m C-mount
	ZVL-LM16FC24M Articolo n..: 11700739	Kowa lens 16 mm F 1,8-16 format 1,1" M.O.D. 0,1 m C-mount
	ZVL-LM25FC24M Articolo n..: 11700738	Kowa lens 12,5 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount available
	ZVL-LM35FC24M Articolo n..: 11700793	Kowa lens 12,5 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount available
	ZVL-LM50FC24M Articolo n..: 11700794	Kowa lens 12,5 mm F 1,4-16 format 1" M.O.D. 0,3 m C-mount available

Cable

	ESG 34JP0200GS Shielded cable 12 wires, female connector, 2,0 m Articolo n..: 11201118	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 2,0 m
	ESG 34JP0500GS Shielded cable 12 wires, female connector, 5,0 m Articolo n..: 11195097	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 5,0 m
	ESG 34JP1000GS Shielded cable 12 wires, female connector, 10,0 m Articolo n..: 11195098	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 10,0 m
	ESG 34JP2000GS Shielded cable 12 wires, female connector, 20,0 m Articolo n..: 11195099	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 20,0 m
	ESW 33JP0200GS 90° shielded cable 12 wires, female connector, 2,0 m Articolo n..: 11201128	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 2,0 m
	ESW 33JP0500GS 90° shielded cable 12 wires, female connector, 5,0 m Articolo n..: 11195094	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 5,0 m
	ESW 33JP1000GS 90° shielded cable 12 wires, female connector, 10,0 m Articolo n..: 11195095	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 10,0 m
	ESW 33JP2000GS 90° shielded cable 12 wires, female connector, 20,0 m Articolo n..: 11195096	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 20,0 m
	KSG 34A/KSG45AR0200G/E Articolo n..: 11700903	M12, male;, D-coded, 4-poles PUR, 200 cm, shielded; RJ45, male, A-coded, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSG 34A/KSG45AR0500G/E Articolo n..: 11700905	M12, male, D-coded, 4-poles; PUR, 500 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSG 34A/KSG45AR1000G/E Articolo n..: 11700904	M12, male, D-coded, 4-poles; PUR, 1000 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	Cable Power Adapter M12/DC Connector Articolo n..: 11048083	shielded adapter connection cable M12/12-pin male connector to confectioned DC connector length 2,0 m manufactured cable: 11201118 ESG 34JP0200GS

Mountings and heat sinks

	ZVM-Mounting Adapter SmartGrid 90° Articolo n..: 11700549	Fixation bracket for VeriSens^® vision sensors incl. screws (hexagon socket) and washers 90° angled available
	ZVM-Mounting Adapter VS UR Articolo n..: 11700550	Fixation bracket for VeriSens^® vision sensors incl. screws (hexagon socket) and washers 90° angled available
	ZVM-Mounting Adapter VS UR 90° Articolo n..: 11700551	Fixation bracket for VeriSens^® vision sensors incl. screws (hexagon socket) and washers 90° angled available
	VS Mounting Adapter Articolo n..: 11177010	Fixation bracket for VeriSens vision sensors incl. screws (hexagon socket) and washers 90° angled
	VeriSens laboratory stand Articolo n..: 11051407	stand for VeriSens content: articulated arm, baseplate, one white and one black underlayment, VeriSens mounting with 2 screws (hexagon socket) max. hight of device mounting approx. 28 cm

Illumination accessories

	VB Fix Kit FLDR-i90B small Illumination fixation kit Articolo n..: 11092203	set of fixation brackets for LED ring light FLDR-i90B and VeriSens^® XC series length: 57 mm
	VB Fix Kit FLDR-i90B large Illumination fixation kit Articolo n..: 11092204	set of fixation brackets for LED ring light FLDR-i90B and VeriSens^® XC series length: 93 mm
	VB Fix Kit RONDO-LX small Articolo n..: 11136136	set of fixation brackets for LED ring light RONDO-LX and VeriSens^® XC series length: 57 mm
	VB Fix Kit RONDO-LX large Articolo n..: 11136139	set of fixation brackets for LED ring light RONDO-LX and VeriSens^® XC series length: 93 mm
	ZVI-LUMIMAX T1 AdapterCable Illumination Adapter cable for illumination Articolo n..: 11175008	adapter cable to connect LUMIMAX Spot5W illuminations to M12/12-pin connector suitable for VeriSens, VCXG.I and VLXT
	ZVI-VB_Fix_Kit_Industrial_Light Illumination fixation kit Articolo n..: 11076264	VeriSens^® illumination fix kit Scales for the documentation of the application setup, also for its replication Use in combination with illumination adapter (for LUMIMAX Spot5W: ZVI-Fix_Kit_Adapter_Spot5W (11175009)) Length: 130 mm
	ZVI-Fix_Kit_Adapter_Spot5W Articolo n..: 11175009	mounting adapter to mount LUMIMAX Spot5W illuminations to ZVI-VB_Fix_Kit_Industrial_Light (11076264)
	ZVI-Polarizer_FLDR_i90B Articolo n..: 11167410	Polarization filter for Falcon illumination FLDR-i90B
	ZVI-Polarizer_holder_FLDR_i90B Articolo n..: 11167411	Mounting adapter for polarization filter for Falcon FLDR-i90B illuminations: ZVI-Polarizer_FLDR-i90B (11167410) incl. screws

Illumination

	ZVI-LED Spot5WFL-W/SPS-220 Articolo n..: 11175031	LED spot light white 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-R/SPS-220 Articolo n..: 11175034	LED spot light red 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-IR850/SPS-220 Articolo n..: 11175035	LED spot light infrared 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-B/SPS-220 Articolo n..: 11175036	LED spot light blue 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	FLDR-i90B-W Articolo n..: 11085869	flashable LED ring light white 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 94 mm
	FLDL-TP-Si36-W Articolo n..: 11086536	flashable LED back light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 47 mm × 47 mm × 15 mm housing
	FLDL-TP-Si200x100-W Articolo n..: 11086537	flashable LED back light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 116 mm × 228 mm × 23,5 mm housing
	FLDL-TP-Si85x77-W Articolo n..: 11086538	flashable LED back light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 95 mm × 95 mm × 15 mm housing
	FLDL-i150x15-W Articolo n..: 11086539	flashable LED bar light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 158 mm × 17 mm × 20 mm housing
	FFPR-i100-W Articolo n..: 11086540	flashable LED dark field illumination white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 100 mm
	FLDR-i90B-IR24 Articolo n..: 11090900	flashable LED ring light IR 875 nm 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 94 mm
	FLFL-Si60-IR24 Articolo n..: 11095910	flashable LED back light NIR diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 1 m dimensions: 94 mm × 94 mm × 10 mm housing
	ZVI-HELIOS-130_IP65_weiß_80°_24VDC_M8 HELIOS-130 IP65 white 80° 24VDC with M8 connector Articolo n..: 11701627	flashable LED ring light white radiation angle 80° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 134 mm IP65 protection
	ZVI-RONDOLX_24VDC_IR850NM_120° RONDO-LX IR 850nm 120° 24VDC with M8 connector Articolo n..: 11130150	flashable LED ring light infrared (850 nm) radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 101 mm
	ZVI-RONDOLX_24VDC_IR850NM_50° RONDO-LX IR 850nm 50° 24VDC with M8 connector Articolo n..: 11130176	flashable LED ring light infrared (850 nm) radiation angle 50° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 101 mm
	ZVI-RONDOLX_24VDC_WEIß_120° RONDO-LX white 120° 24VDC with M8 connector Articolo n..: 11130179	flashable LED ring light white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 101 mm
	ZVI-HILIGHT80_24VDC_WEIß HI-LIGHT-80 white 24VDC with M8 connector Articolo n..: 11130181	flashable LED back light white diffuse radiation angle 80° diameter: 94 mm 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector dimensions: 87 mm × 87 mm × 20 mm housing
	ZVI-HILIGHT120_24VDC_WEIß HI-LIGHT-120 white 24VDC with M8 connector Articolo n..: 11130182	flashable LED back light white diffuse radiation angle 120° diameter: 94 mm 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 127 mm × 127 mm × 20 mm housing
	ZVI-ARCUSM_24VDC_WEIß_120° ARCUS-M white 24VDC with M8 connector Articolo n..: 11130183	flashable LED dark field illumination white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) diameter: 120 mm
	ZVI-LOGO2_24VDC_ROT617NM_30° LOGO-2 red 617nm 30° 24VDC with M8 connector Articolo n..: 11130184	flashable LED bar light red (617 nm) radiation angle 30° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 74 mm × 15 mm × 17 mm housing
	ZVI-TOPLINED1_24VDC_WEIß_120° TOP-LINE-D1 white 120° 24VDC M8 1-canal Articolo n..: 11130185	flashable LED bar light white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 78 mm × 25 mm × 23 mm housing
	ZVI-TOPLINED1_24VDC_SHWEIß_120° TOP-LINE-D1 SH white 120° 24VDC M8 1-canal Articolo n..: 11130186	flashable LED bar light SH white radiation angle 120° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 78 mm × 25 mm × 23 mm housing
	ZVI-TOPLINED1_24VDC_ROT617NM_30° TOP-LINE-D1 red 617nm 30° 24VDC M8 1-canal Articolo n..: 11130187	flashable LED bar light red (617 nm) radiation angle 30° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 78 mm × 25 mm × 23 mm housing
	ZVI-TOPLIGHT80_24VDC_rot617nm_30° TOPLIGHT80 red 617nm 30° 24VDC Articolo n..: 11135012	flashable LED incident light red (617 nm) radiation angle 30° 24 V voltage-driven (equipped with integrated pre-resistor) M8/4-pin connector (cable has to be ordered separately) dimensions: 87 mm × 87 mm × 20 mm housing
	FLDR-i90B-SR24 Articolo n..: 11154321	flashable LED ring light red (626 nm) 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m diameter: 94 mm
	ZVI-FLDL-i86x15-W Articolo n..: 11197768	flashable LED bar light white diffuse 24 V voltage-driven (equipped with integrated pre-resistor) cable length: 0,3 m dimensions: 18 mm × 95 mm × 20 mm housing