2. Panoramica dei prodotti
  3. Encoder / sensori angolari
  4. Encoder incrementali per l’industria
  5. Segnali e risoluzione programmabili
  6. HS35P
  7. HS35P - Programmable
Dati tecnici
Dati tecnici - Valori elettrici
Tensione operativa
  • 4.75...30 VDC
Reverse polarity protection
  • Yes
Corrente operativa senza carico
  • ≤50 mA (24 VDC)
  • ≤180 mA (5 VDC) + output load, max. 250 mA
Impulsi per giro
  • 1 … 8192
Principio di scansione
  • Ottico
Frequenza di uscita
  • ≤300 kHz (TTL)
  • ≤160 kHz (HTL)
Segnale di uscita
  • A, B, Z
  • A, B, Z + complement, ½ cycle index gated with negative B channel
Livelli di uscita
  • Linedriver (TTL, 7272) Vout = 5 V, short-circuit proof
  • Push-pull (HTL, 7272) Vout = Vin, short-circuit proof
Programmable parameters
  • Output resolution in increments of one (can be different for A and B)
  • Output level TTL/HTL
  • Zero pulse width and position
  • Rotational direction CW/CCW
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-3
Approvazione
  • UL approval / E240061
  • RoHS compliant EU guideline 2011/65/EC
  • CE
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø3.15" (ø80 mm)
Tipo di albero
  • ø0.375...1" (ø9.525...25.4 mm) (through hollow shaft isolated)
Bore runout
  • 0.0016" (0.04 mm) TIR max.
Admitted misalignment
  • 0.004" (0.1016 mm) radial TIR (end of shaft)
  • 0.01" (0.254 mm) axial
Classe di protezione EN 60529
  • IP 54
  • IP 65
  • IP 67
Velocità operativa
  • ≤5000 rpm (see temperature diagram)
Bearing
  • 52100 SAE high carbon steel (ABEC 5)
Coppia di spunto
  • ≤3 in-oz (77 °F, IP 65)
  • ≤0,02 Nm (+25 °C, IP 65)
Rotore momento d‘inerzia
  • 2,3 oz-in² (420 gcm²)
Service life
  • Bearing: typ. 13 billion rev. (89000 h/2500 rpm)
Materiale
  • Housing: aluminium, powder-coated
  • Shaft: stainless steel
Temperatura operativa
  • -40...+212 °F (-40...+100 °C), (fixed cable): see temperature diagram
Relative humidity
  • 98 % non-condensing
Resistenza
  • EN 60068-2-6 Vibrazione 20 g, 60-2000 Hz
  • EN 60068-2-27 Urti 200 g, 6 ms
Allacciamento
  • MIL-connector, 7-pin
  • MIL-connector, 10-pin
  • Cable (AWG26 wire)
Peso ca.
  • 23 oz.
  • 660 g
software
Software

Scaricare
Data sheet
Quickstart
Certificates / approvals
Declaration of conformity
CAD

Accessori
Accessori di montaggio
The selected altAttribute does not exist! Torque arm T1

Articolo n..: 11076339
  • Fast and easy mounting on encoder. Prevents against bearing force overlaod.
  • Fixed length, for bolt 3/8" with plastic clip and screws
The selected altAttribute does not exist! Torque arm T3

Articolo n..: 11075692
  • Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point.
  • Adjustable length, for bolt 1/4" with plastic clip and screws
The selected altAttribute does not exist! Torque arm T4

Articolo n..: 11075690
  • Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point.
  • Adjustable length, for bolt 5/16" with plastic clip and screws
The selected altAttribute does not exist! Torque arm T5

Articolo n..: 11071506
  • Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point.
  • Adjustable length, for bolt 3/8" with plastic clip and screws
The selected altAttribute does not exist! Torque arm T6

Articolo n..: 11167978
  • Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point.
  • Adjustable length, kit for bolts 1/4", 5/16" and 3/8" with plastic clip and screws
The selected altAttribute does not exist! Reducer insert HS35 ø0.375" (ø9.525 mm)

Articolo n..: 11084462
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø0.50" (ø12.7 mm)

Articolo n..: 11078636
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø0.625" (ø15.875 mm)

Articolo n..: 11080114
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø0.75" (ø19.05 mm)

Articolo n..: 11078639
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø0.87" (ø22.225 mm)

Articolo n..: 11078654
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø10 mm

Articolo n..: 11087744
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø12 mm

Articolo n..: 11087745
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø14 mm

Articolo n..: 11087746
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø15 mm

Articolo n..: 11148651
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø16 mm

Articolo n..: 11087747
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø18 mm

Articolo n..: 11087748
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Reducer insert HS35 ø20 mm

Articolo n..: 11087750
  • Easy assembly by plugging in
  • Exchange possible without tools
  • Quick adjustment of the required diameter
  • Suitable for high speeds
The selected altAttribute does not exist! Dust cap HS35

Articolo n..: 11075459
  • Fast and easy mounting on encoder backside. Prevents encoder bearing against dust, dirt and fluids. Sealing up to IP 67.
The selected altAttribute does not exist! Protective cage HS35

Articolo n..: 11080884
  • Protective cover; for NEMA 56C-face (4.5") and fan-cover. For attachment to a fan cover hammer head bolts are recommended (not included).
Connettori e cavi
The selected altAttribute does not exist! NAC 25E 7-pin Mil Spec Mating Connector (Stock in US)

Articolo n..: 11150977
  • NAC 25E 7-pin Mil Spec Mating Connector (female)
  • Stock in US
The selected altAttribute does not exist! CNAC 25E0500 7-pin Mil Spec Mating Connector + cable L=5 m (Stock in US)

Articolo n..: 11150863
  • Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 5 m
  • Stock in US
The selected altAttribute does not exist! CNAC 25E1000 7-pin Mil Spec Mating Connector + cable L=10 m (Stock in US)

Articolo n..: 11150865
  • Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 10 m
  • Stock in US
The selected altAttribute does not exist! NAC 29H 10-pin Mil Spec Mating Connector (Stock in US)

Articolo n..: 11150978
  • NAC 29H 10-pin Mil Spec Mating Connector (female)
  • Stock in US
The selected altAttribute does not exist! CNAC 29H0200 10-pin Mil Spec Mating Connector + cable L=2 m (Stock in US)

Articolo n..: 11151376
  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 2 m
  • Stock in US
The selected altAttribute does not exist! CNAC 29H0500 10-pin Mil Spec Mating Connector + cable L=5 m (Stock in US)

Articolo n..: 11150869
  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 5 m
  • Stock in US
The selected altAttribute does not exist! CNAC 29H1000 10-pin Mil Spec Mating Connector + cable L=10 m (Stock in US)

Articolo n..: 11150871
  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 10 m
  • Stock in US
The selected altAttribute does not exist! CNAC 29H1500 10-pin Mil Spec Mating Connector + cable L=15 m (Stock in US)

Articolo n..: 11151328
  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 15 m
  • Stock in US
The selected altAttribute does not exist! CNAC 29H2500 10-pin Mil Spec Mating Connector + cable L=25 m (Stock in US)

Articolo n..: 11150872
  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 25 m
  • Stock in US
The selected altAttribute does not exist! NAC 25E 7-pin Mil Spec Mating Connector

Articolo n..: 11128642
  • NAC 25E 7-pin Mil Spec Mating Connector (female)
The selected altAttribute does not exist! CNAC 25E 7-pin Mil Spec Mating Connector + cable L=10 ft (3.05 m)

Articolo n..: 11078440
  • Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 10 ft (3.05 m)
The selected altAttribute does not exist! CNAC 25E 7-pin Mil Spec Mating Connector + cable L=20 ft (6.10 m)

Articolo n..: 11078442
  • Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 20 ft (6.10 m)
The selected altAttribute does not exist! CNAC 25E 7-pin Mil Spec Mating Connector + cable L=30 ft (9.15 m)

Articolo n..: 11078446
  • Shielded connection cable with mating connector NAC 25E 7-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 30 ft (9.15 m)
The selected altAttribute does not exist! NAC 29H 10-pin Mil Spec Mating Connector

Articolo n..: 11126235
  • NAC 29H 10-pin Mil Spec Mating Connector (female)
The selected altAttribute does not exist! CNAC 29H 10-pin Mil Spec Mating Connector + cable L=10 ft (3.05 m)

Articolo n..: 11078307
  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 10 ft (3.05 m)
The selected altAttribute does not exist! CNAC 29H 10-pin Mil Spec Mating Connector + cable L=20 ft (6.10 m)

Articolo n..: 11078427
  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 20 ft (6.10 m)
The selected altAttribute does not exist! CNAC 29H 10-pin Mil Spec Mating Connector + cable L=30 ft (9.15 m)

Articolo n..: 11078428
  • Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves
  • Cable length 30 ft (9.15 m)
Programmazione accessori
The selected altAttribute does not exist! PC Programming Tool Z-PA-EI-P
For programmable encoders EIL580P, HS35P, ITD2PH00.2

Articolo n..: 11120547
  • PC Programming Tool incl. Encoder Software
  • Easy and intuitive operation
  • Memory of several encoder configurations
  • Encoder diagnostics with monitor output
  • USB powered
  • Product documentation by printing customized product labels
The selected altAttribute does not exist! Handheld Programming Tool Z-PA-EI-H

Articolo n..: 11120657
  • Battery operated stand-alone solution
  • Intuitive, fully menu-driven programming
  • Four user-assigned buttons for simple and quick programming
  • Memory of several encoder configurations
  • Backlit display
  • LED status indicator
  • Encoder diagnostic functions
In alto