optoPulse EN580E.IL-SC10.GE1T2.04096.K

Articolo n..: 11246037

Size ø58 mm
Precise optical sensing
Output signal level TTL or HTL
Pulses per revolution up to 4096
High connection flexibility thanks to flexible M12 and flylead connector M23

disponibilità su richiesta

Dati tecnici

mostra tutti

Dati tecnici - Valori elettrici

Tensione operativa

5 VDC ±5 %

Reverse polarity protection

Short-circuit proof

Yes (max. 1 s and 1 signal)

Corrente operativa senza carico

≤70 mA

Impulsi per giro

4096

Sfasamento

90 ° ±10°

Rapporto ciclico

40…60 %

Segnale di riferimento

Zero pulse, width 90° ±10 %

Principio di scansione

Ottico

Frequenza di uscita

≤300 kHz (TTL)

Segnale di uscita

A+, B+, R+, A-, B-, R-

Livelli di uscita

TTL/RS422

Immunità alle interferenze

EN 61000-6-2

Emissione di interferenze

EN 61000-6-4

Approvazione

UL-Listing: E217823

Dati tecnici - progettazione meccanica

Grandezza (flangia)

ø58 mm

Tipo di albero

ø10 x 20 mm, solid shaft with flat

Carico dell‘albero massimo ammesso

≤40 N assiale
≤80 N radiale

Flangia

Clamping flange

Classe di protezione EN 60529

IP 54 (flange side)
IP 65 (housing side)

Velocità operativa

≤6000 rpm (+25 °C)

Coppia di spunto

≤0,02 Nm

Materiale

Housing: aluminium
Albero: acciaio inox

Temperatura operativa

-25...+100 °C (see general information)

Relative humidity

95 % non-condensing

Resistenza

EN 60068-2-6 Vibrazione 30 g, 10-2000 Hz
EN 60068-2-27 Urti 100 g, 11 ms

Allacciamento

Flylead connector M23, 12-pin, tangential, length 300 mm

Peso ca.

300 g

Scaricare

mostra tutti

Data sheet

Schede tecniche – EN580E.IL-SC10.GE1T2.04096.K
- FR (pdf | 838 KB)
Schede tecniche – EN580E.IL-SC10.GE1T2.04096.K
- DE (pdf | 844 KB)
Schede tecniche – EN580E.IL-SC10.GE1T2.04096.K
- EN (pdf | 838 KB)

Quickstart

EN580E.IL
- DE/EN/FR (pdf | 2 MB)

Certificates / approvals

UL-Listing: E217823
- (pdf | 263 KB)

CAD

EN580E.IL - solid shaft with clamping flange, flylead connector M23
- (zip | 281 KB)

EPLAN

Link al portale dati
- Link al portale dati

Accessori

mostra tutti

Accessori di montaggio

	Double loops coupling (D1=10 / D2=10) For encoder with solid shaft Articolo n..: 11101781	Thermally and electrically isolated Absorbing shocks and vibration Excellent compensation of radial, lateral and angular misalignments Medium torsional stiffness Low restoring forces Maintenance-free
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Articolo n..: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=10) For encoder with solid shaft Articolo n..: 11065923	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Articolo n..: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=10) For encoder with solid shaft Articolo n..: 10141133	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=10) For encoder with solid shaft Articolo n..: 11069340	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Bellows coupling (D1=10 / D2=10) For encoder with solid shaft Articolo n..: 11053277	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Spring encoder arm Articolo n..: 11101893	Tether arm for Ø58 mm with clamping flange Optimal for use encoders with measuring wheel Virtually any contact pressure adjustable Versatile mounting options
	Mounting adaptor For encoders with clamping flange Articolo n..: 10125051	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount

Cavi con fili aperti

	Female connector M23, 12-pin, CW, with cable 1 m Articolo n..: 11095302	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 1 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 2 m Articolo n..: 11100408	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 2 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 5 m Articolo n..: 11100430	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 5 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 10 m Articolo n..: 11100431	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 10 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Connector M23 (S2BG12), 1 m cable (incremental) Articolo n..: 11072792	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 2 m cable (incremental) Articolo n..: 11072796	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 5 m cable (incremental) Articolo n..: 11072804	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs
	Connector M23 (S2BG12), 10 m cable (incremental) Articolo n..: 11072815	Shielded connection cable with M23-female connector (12-pin) and wire end sleeves for incremental encoders with sensor outputs

Measuring wheels

	MR752.10A Small measuring wheel Articolo n..: 11011440	Circumference 30.48 cm Surface profile: Smooth Surface material: Polyurethan Bore ø10 mm
	MR241.10D Small measuring wheel Articolo n..: 11033281	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø10 mm
	MR261.10A Small measuring wheel Articolo n..: 11033290	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø10 mm
	MR291.10D Small measuring wheel Articolo n..: 11033300	Circumference 20 cm Surface profile: Knurled Surface material: Hytrel TPE-E Bore ø10 mm
	MR512.10A Large measuring wheel Articolo n..: 11033308	Circumference 50 cm Surface profile: Cross-knurled Surface material: Aluminium Bore ø10 mm
	MR552.10A Large measuring wheel Articolo n..: 11033323	Circumference 50 cm Surface profile: Smooth Surface material: Polyurethan Bore ø10 mm
	MR562.10A Large measuring wheel Articolo n..: 11033329	Circumference 50 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø10 mm
	MR542.10D Large measuring wheel Articolo n..: 11038480	Circumference 50 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø10 mm
	MR592.10D Large measuring wheel Articolo n..: 11038481	Circumference 50 cm Surface profile: Knurled Surface material: Hytrel TPE-E Bore ø10 mm