MAGRES EAM580R-SY - Analog | Encoder assoluti

Encoder single- or multiturn / Analog
E1 compliant design
High protection up to IP 67
High resistance to shock and vibrations
Protection against corrosion CX (C5-M)
Wire cross section 0.5 mm²
Teach input for adjustment of measuring range
Applicable up to PLd (ISO 13849)

disponibilità su richiesta

Dati tecnici

mostra tutti

Dati tecnici - Valori elettrici

Tensione operativa

8...30 VDC
14...30 VDC

Reverse polarity protection

Tip. corrente operativa

20 mA (24 VDC, w/o load)

Initializing time

≤ 170 ms after power on

Response time

< 1 ms

Interface

Analog 0...10 V / 0.5...4.5 V / 4...20 mA / Resolution: 12 bit

Function

Multiturn
Singleturn

Teach range

5°...359.9° (singleturn)
5°...32767 turns (multiturn)

Absolute accuracy

±0,15 ° (+20 ±15 °C)
±0,25 ° (-40...+85 °C) sensor

Accuracy analog output

±0.5 % of whole measuring range
(-40...+85 °C)

Principio di scansione

Magnetic

Immunità alle interferenze

EN 61000-6-2
ISO 11452-2:2004* / -5:2002*
ISO 7637-2:2004*
ISO 10605:2008 + Amd 1:2014 (CD ±8 kV / AD ±15 kV)
* Severity level according to ECE R10 (Rev. 4)

Emissione di interferenze

EN 61000-6-4
CISPR 25:2008 (30...1000 MHz)
ISO 7637-2:2004*
* Severity level according to ECE R10 (Rev. 4)

MTTF_d (ISO 13849)

High (>100 years)
Use in safety functions exclusively based on Application Note and MTTFd reliability prediction (request separately).

Programmable parameters

Measuring range teachable

Diagnostic function

DATAVALID

Factory setting

360° and 10 revolutions (other on request)

Approvazione

UL approval / E217823

Dati tecnici - progettazione meccanica

Grandezza (flangia)

ø58 mm

Tipo di albero

ø6 x 10 mm, solid shaft with flat

Flangia

Synchro flange

Classe di protezione EN 60529

IP 67 (with shaft seal)

Velocità operativa

≤6000 rpm

Coppia di spunto

≤2,5 Ncm (+20 °C, IP 67)

Moment of inertia

15,38 gcm²

Carico dell‘albero massimo ammesso

≤40 N assiale
≤80 N radiale

Materiale

Housing: steel, powder-coated
Flange: aluminium
Albero: acciaio inox

Corrosion protection

IEC 60068-2-52 Salt mist
for ambient conditions CX (C5-M) according to ISO 12944-2

Temperatura operativa

-40...+85 °C (see general informations)

Relative humidity

95 %

Resistenza

EN 60068-2-6
Vibrazione 30 g, 10-2000 Hz
EN 60068-2-27
Urti 500 g, 1 ms

Peso ca.

250 g

Allacciamento

Flange connector M12, 5-pin
Cable 2 m

Scaricare

mostra tutti

Data sheet

Schede tecniche – EAM580R-SY - Analog
- DE (pdf | 926 KB)
Schede tecniche – EAM580R-SY - Analog
- EN (pdf | 953 KB)
Schede tecniche – EAM580R-SY - Analog
- FR (pdf | 956 KB)
Schede tecniche – EAM580R-SY - Analog
- ZH (pdf | 1 MB)

Quickstart

EAM580R - analog
- DE/EN/FR/IT/ES (pdf | 860 KB)

Brochures / Catalogs

Brochure – Magnetic absolute encoders EAM580 / EAM360
- DE (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- EN (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- FR (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- IT (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ES (pdf | 1 MB)
Brochure – Magnetic absolute encoders EAM580 / EAM360
- ZH (pdf | 1 MB)

Declaration of conformity

DoC / CoC - EAM580 / EAM580R
- DE/EN/FR (pdf | 281 KB)

CAD

EAM580 / EAM580R: Solid shaft ø6 mm, cable radial, synchro flange, IP67
- STEP (zip | 204 KB)
EAM580 / EAM580R: Solid shaft ø6 mm, M12 radial, synchro flange, IP67
- STEP (zip | 191 KB)

Accessori

mostra tutti

Accessori di montaggio

	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Articolo n..: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=06 / D2=06) For encoder with solid shaft Articolo n..: 11065916	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Articolo n..: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft Articolo n..: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=06 / D2=06) For encoder with solid shaft Articolo n..: 11069333	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Articolo n..: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Mounting adaptor For encoders with synchro flange Articolo n..: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Articolo n..: 10117668	With 3x eccentric fixings, screws and nuts

Connettori e cavi

	Female connector M12, 5-pin, straight, without cable Articolo n..: 10153968	Female connector M12, 5-pin, straight
	ESG 34CP0200G Articolo n..: 11229672	M12, female, A-coded; 5-poles; PUR, 200 cm, shielded, free cable end Dragchain capable Head A: IP65, IP66K, IP67 Cable: Good resistance against chemicals, flames and oils Halogen free
	ESG 34CP0500G Articolo n..: 11229675	M12, female, A-coded; 5-poles; PUR, 500 cm, shielded, free cable end Dragchain capable Head A: IP65, IP66K, IP67 Cable: Good resistance against chemicals, flames and oils Halogen free
	ESG 34CP1000G Articolo n..: 11224777	M12, female, A-coded; 5-poles; PUR, 1000 cm, shielded, free cable end Dragchain capable Head A: IP65, IP66K, IP67 Cable: Good resistance against chemicals, flames and oils Halogen free

Measuring wheels

	MR241.06D Small measuring wheel Articolo n..: 11033278	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø6 mm
	MR261.06A Small measuring wheel Articolo n..: 11033288	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø6 mm

In alto

Encoder assoluti

MAGRES EAM580R-SY - Analog

Solid shaft with synchro flange

Dati tecnici

Dati tecnici - Valori elettrici

Dati tecnici - progettazione meccanica

Scaricare

Data sheet

Quickstart

Brochures / Catalogs

Declaration of conformity

CAD

Accessori

Accessori di montaggio

Connettori e cavi

Measuring wheels