Dati tecnici
Dati tecnici - Valori elettrici
- Tensione operativa
- 10...30 VDC
- Reverse polarity protection
- Yes
- Corrente operativa senza carico
- ≤100 mA (24 VDC)
- Interface
- EtherNet/IP
- Function
- Multiturn
- Steps per revolution
- ≤262144 / 18 bit (adjustable)
- Number of revolutions
- ≤65536 / 16 bit (adjustable)
- Total resolution
- ≤ 31 bit
- Absolute accuracy
- ±0,01 ° (ST 18 bit / MT 13 bit)
- ±0,025 ° (ST 13 bit / MT 16 bit)
- Principio di scansione
- Ottico
- Immunità alle interferenze
- EN 61000-6-2
- Emissione di interferenze
- EN 61000-6-4
- Status indicator
- 4x LED integrated in housing
- Approvazione
- UL approval / E63076
Dati tecnici - progettazione meccanica
- Grandezza (flangia)
- ø58 mm
- Tipo di albero
- ø10...15 mm (blind hollow shaft)
- Classe di protezione EN 60529
- IP 54
- IP 65
- IP 67
- Velocità operativa
- ≤6000 giri/min (meccanico)
- ≤6000 rpm (electric)
- Starting acceleration
- ≤1000 U/s²
- Coppia di spunto
- ≤0,04 Nm (+25 °C, IP 54)
- Rotore momento d‘inerzia
- 20 gcm²
- Materiale
- Housing: zinc diecast
- Flange: aluminium
- Temperatura operativa
- -40...+85 °C (see general informations)
- Relative humidity
- 95 % non-condensing
- Resistenza
- EN 60068-2-6
- Vibrazione ±0,75 mm - 10-58 Hz, 10 g - 58-2000 Hz
- EN 60068-2-27
- Urti 100 g, 2 ms
- Peso ca.
- 500 g
- Allacciamento
- Flange connector 3xM12
software
Software
-
EAL580 - EtherNet/IP describing files
Scaricare
Data sheet
-
Schede tecniche – EAL580-B - EtherNet/IP
-
Schede tecniche – EAL580-B - EtherNet/IP
-
Schede tecniche – EAL580-B - EtherNet/IP
-
Schede tecniche – EAL580-B - EtherNet/IP
Quickstart
-
EAL580 - EtherNet/IP
Software Manual
-
EAL580, EAM580 - EtherNet/IP
-
EAL580, EAM580 - EtherNet/IP
Certificates / approvals
-
UL certificate E63076
-
EAx580 - EtherNet/IP certificate
Declaration of conformity
-
DoC / CoC - EAL580
CAD
-
EAL580 - Blind hollow shaft ø10 mm, with torque pin, IP54 / IP65
-
EAL580 - Blind hollow shaft ø10 mm, without stator coupling, IP54 / IP65
-
EAL580 - Blind hollow shaft ø12 mm, with torque pin, IP54 / IP65
-
EAL580 - Blind hollow shaft ø12 mm, without stator coupling, IP54 / IP65
-
EAL580 - Blind hollow shaft ø12 mm, without stator coupling, IP67
-
EAL580 - Blind hollow shaft ø14 mm, with torque pin, IP54 / IP65
-
EAL580 - Blind hollow shaft ø14 mm, without stator coupling, IP54 / IP65
-
EAL580 - Blind hollow shaft ø15 mm, with torque pin, IP54 / IP65
-
EAL580 - Blind hollow shaft ø15 mm, without stator coupling, IP54 / IP65
Disegni
Accessori
Accessori di montaggio
|
Torque support by rubber buffer for encoders with 15 mm pin (Z 119.041)
Articolo n..: 10139345 |
|
|
Torque arm, 1-arm (mounting kit 056)
Articolo n..: 11066120 |
|
|
Spring coupling for encoders with ø58 mm housing, hole distance 73 mm (Z 119.072)
Articolo n..: 10165157 |
|
|
|
Spring coupling for encoders with ø58 mm housing, hole distance 68 mm (Z 119.073)
Articolo n..: 11034121 |
|
|
Spring coupling for one-side attachment, length 115 mm (Z 119.076)
Articolo n..: 11034123 |
|
|
Spring coupling for encoders with ø58 mm housing, hole distance 63 mm (Z 119.082)
Articolo n..: 11003562 |
|
|
Spring coupling, hole distance 32.5 mm (Z 119.101)
Spring coupling, 1-armed, bolt circle ø65 mm, mounting M4
Articolo n..: 11201396 |
|
|
Self-tapping grounding screw (Z 119.100)
Articolo n..: 11177167 |
|
Connettori e cavi
|
Cable connector M12, 4-pin, on both sides, D-coded, 5 m cable (Z 185.E05)
Articolo n..: 11034355 |
|
|
Cable connector M12, 4-pin, straight, D-coded, without cable (Z 185.S01)
Articolo n..: 11174046 |
|
|
Cable connector M12, 4-pin, angled, D-coded, without cable (Z 185.S02)
Articolo n..: 11174047 |
|
|
Female connector M12, 5-pin, A-coded, 5 m cable (Z 185.P05)
Articolo n..: 11034356 |
|
|
|
Female connector M12, 5-pin, A-coded, 10 m cable (Z 185.P10)
Articolo n..: 11212237 |
|