VS XF800M03W12IP

Articolo n..: 11162177

PROFINET and EtherNet/IP interface integrated
FEX image processor
FEXLoc 360° part location
Flexible result conjunction
Download VeriSens Application Suite: www.baumer.com/vs-sw

8 pezzi immediatamente disponibili a magazzino

Dati tecnici

mostra tutti

Dati generali

Resolution

752 × 480 px

Sensor type

1/3″ CMOS, monochrome

Illumination

integrated, LED white

LED class

risk group 1 (low risk, EN 62471:2008)

High-resolution mode

max. 50 inspections per second

High-speed mode (limited resolution)

max. 100 inspections per second

Object distance min.

50 mm

Object distance max.

450 mm

Number of jobs (products)

≤ 255

Features per job

Signal processing

Baumer FEX^® 4.0

Defect image memory

Lens

12 mm

Dati elettrici

Nominal voltage power supply

24 V ±25 %

Nominal voltage power supply (add-on)

Class 2 according to NEC / protection class III

Nominal voltage power supply (info)

The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC.

Power consumption

Max. 18 W (with I/O)

Inputs

8 … 30 V (polarity protected)

Digital inputs

5 inputs
trigger
job selection
external teach-in
encoders (CH-A, CH-B) 500 kHz

Outputs

PNP I_peak = 100 mA and I_eff = 50 mA (short-circuit proof)

Digital outputs

5 outputs
Pass / Fail
Flash Sync
Alarm
Camera Ready
Output Enable

Initial setup

Ethernet (10BASE-T / 100BASE-TX)

Process interface

PROFINET (CC-A)
EtherNet/IP^™
TCP/UDP (Ethernet)

Visualization

configurable web interface with MultiViewer function

Dati meccanici

Width

53 mm

Height

99,5 mm

Depth

38 mm

Weight

≤ 250 g

Material

housing: aluminum
cover glass: PMMA

Condizioni ambientali

Operating temperature

+5 … +60 °C @ T = measurement point

Storage temperature

-20 … +70 °C

Humidity

0 … 90 % (non-condensing)

Protection class

IP 67

Vibration load

IEC 60068-2-6
IEC 60068-2-64

Mechanical shock resistance

EN 60068-2-27

Barcode

2/5 Industrial
2/5 Interleaved
Codabar
Code 39
Code 93
Code 128
PharmaCode
EAN 8
EAN 13
UPC-A
UPC-E
GS1 DataBar
GS1 128

Matrix code

DataMatrix (ECC 200)
GS1-DataMatrix
QR-Code
PDF417

Font

many font styles (recommended: sans serif, proportional)
Dot Matrix
characters: A-Z a-z 0-9 + - . : / ( )

Part location

part location on contours
part location on edges
part location on circle
part location on text line

Geometry

Distance
circle
angle
count edges
point position
edge characteristics

Feature comparison

count contour points
contour comparison
brightness
contrast
area size
count areas
pattern comparison
find object positions

Identification

Barcode
Matrix code
text

Conformità

Conformity

CE
RoHS
KC (R-REI-BkRR-VeriSens-IP)
UL

Flash memory size

2000 Mbit Flash S34ML02G100BHI0000

software

mostra tutti

Software packages

VeriSens Application Suite v2.11.0 (Windows)
- Download
VeriSens S7 Function Library
- Richiedi pacchetto
Verisens PROFINET GSD
- Download
Verisens EtherNet/IP EDS
- Download

Software

Baumer VeriSens Lens Tool v2.3.6
- EN (zip | 223 KB)

Scaricare

mostra tutti

Data sheet

Schede tecniche – VS XF800M03W12IP
- DE (pdf | 976 KB)
Schede tecniche – VS XF800M03W12IP
- EN (pdf | 972 KB)

Quickstart

Quick Start Guide VeriSens vision sensors
- EN/DE/FR/IT/ES/ZH/KO/TH/JP (pdf | 7 MB)

Operating Manual

Technical documentation VeriSens ID / CS / XF / XC

Certificates / approvals

CE certification
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 175 KB)
KC registration
- KO/EN (pdf | 1 MB)
UL certification
- EN (pdf | 526 KB)

Application notes

Application Notes
- Link

CAD

VS XF800M03W12IP / STEP
- (zip | 680 KB)

EPLAN

Link al portale dati
- Link al portale dati

Disegni

mostra tutti

Accessori

mostra tutti

Power supply

Power Supply 24V/1.0A Int. DC Connector

Articolo n..: 11079750

power supply 24V/1,0A with adapters for EU, US, UK AU, KR
in combination with "Cable power adapter M12/DC connector" (11048083) suitable for VCXG.I(.XT), VLXT, VAX and VeriSens

Starter Kit

Starter Kit VeriSens Universal

Articolo n..: 11075442

confectioned connection cable M12/12-pin with power supply 24V/1.0A
Ethernet cable
90° angled fixation bracket incl. screws
screw driver
Application Suite (Windows) via Download
VeriSens not included

Lens accessories

ZVF-Filter Pol. VeriSens ID CS XF

Articolo n..: 11161075

Attachable polarization filter for VeriSens ID, CS and XF series
Only to use with white illumination. Please note that only about 20% of the light reaches the image sensor when a polarization filter is used.

Cable

	ESG 34JP0200GS Shielded cable 12 wires, female connector, 2,0 m Articolo n..: 11201118	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 2,0 m
	ESG 34JP0500GS Shielded cable 12 wires, female connector, 5,0 m Articolo n..: 11195097	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 5,0 m
	ESG 34JP1000GS Shielded cable 12 wires, female connector, 10,0 m Articolo n..: 11195098	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 10,0 m
	ESG 34JP2000GS Shielded cable 12 wires, female connector, 20,0 m Articolo n..: 11195099	shielded process interface cable M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 20,0 m
	ESW 33JP0200GS 90° shielded cable 12 wires, female connector, 2,0 m Articolo n..: 11201128	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 2,0 m
	ESW 33JP0500GS 90° shielded cable 12 wires, female connector, 5,0 m Articolo n..: 11195094	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 5,0 m
	ESW 33JP1000GS 90° shielded cable 12 wires, female connector, 10,0 m Articolo n..: 11195095	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 10,0 m
	ESW 33JP2000GS 90° shielded cable 12 wires, female connector, 20,0 m Articolo n..: 11195096	shielded process interface cable 90° angled M12/12-pin female connector to open wires cable carrier compatible suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles) length 20,0 m
	KSG 34A/KSG45AR0500G/E Articolo n..: 11700905	M12, male, D-coded, 4-poles; PUR, 500 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSG 34A/KSG45AR1000G/E Articolo n..: 11700904	M12, male, D-coded, 4-poles; PUR, 1000 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSG 34A/KSG45AR0200G/E Articolo n..: 11700903	M12, male;, D-coded, 4-poles PUR, 200 cm, shielded; RJ45, male, A-coded, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSW 33A/KSG45AR0200G/E Articolo n..: 11701260	M12, male, D-coded, 4-poles; PUR, 200 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSW 33A/KSG45AR0500G/E Articolo n..: 11701261	M12, male, D-coded, 4-poles; PUR, 500 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	KSW 33A/KSG45AR1000G/E Articolo n..: 11701262	M12, male, D-coded, 4-poles; PUR, 1000 cm, shielded; RJ45, male, 4-poles Suitable for robotics ± 180 °/m Head A: IP67; Head B: IP20 Cable: good resistance against flames, oils
	Cable Power Adapter M12/DC Connector Articolo n..: 11048083	shielded adapter connection cable M12/12-pin male connector to confectioned DC connector length 2,0 m manufactured cable: 11201118 ESG 34JP0200GS

Mountings and heat sinks

	VeriSens laboratory stand Articolo n..: 11051407	stand for VeriSens content: articulated arm, baseplate, one white and one black underlayment, VeriSens mounting with 2 screws (hexagon socket) max. hight of device mounting approx. 28 cm
	VS Mounting Adapter Articolo n..: 11177010	Fixation bracket for VeriSens vision sensors incl. screws (hexagon socket) and washers 90° angled

Illumination accessories

	ZVI-LUMIMAX T1 AdapterCable Illumination Adapter cable for illumination Articolo n..: 11175008	adapter cable to connect LUMIMAX Spot5W illuminations to M12/12-pin connector suitable for VeriSens, VCXG.I and VLXT
	ZVI-VB_Fix_Kit_Industrial_Light Illumination fixation kit Articolo n..: 11076264	VeriSens^® illumination fix kit Scales for the documentation of the application setup, also for its replication Use in combination with illumination adapter (for LUMIMAX Spot5W: ZVI-Fix_Kit_Adapter_Spot5W (11175009)) Length: 130 mm
	ZVI-Fix_Kit_Adapter_Spot5W Articolo n..: 11175009	mounting adapter to mount LUMIMAX Spot5W illuminations to ZVI-VB_Fix_Kit_Industrial_Light (11076264)

Illumination

	ZVI-LED Spot5WFL-W/SPS-220 Articolo n..: 11175031	LED spot light white 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-R/SPS-220 Articolo n..: 11175034	LED spot light red 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-IR850/SPS-220 Articolo n..: 11175035	LED spot light infrared 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)
	ZVI-LED Spot5WFL-B/SPS-220 Articolo n..: 11175036	LED spot light blue 19… 30 V cable length: 0,15 m diameter: 34 mm adjustable glass optics for spot or broad light integrated flash controller and potentiometer (brightness and exposure time) direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008)) maximum exposure time 220 µs (maximum frequency 35 Hz)

In alto

Vision sensors

VS XF800M03W12IP

XF800

Dati tecnici

Dati generali

Dati elettrici

Dati meccanici

Condizioni ambientali

Conformità

software

Software packages

Software

Scaricare

Data sheet

Quickstart

Operating Manual

Certificates / approvals

Application notes

CAD

EPLAN

Disegni

Dimension drawing

Electrical connection M12 / 12-pin, A-coded (on device)

Ethernet connection M12 / 4-pin (on device)

Accessori

Power supply

Starter Kit

Lens accessories

Cable

Mountings and heat sinks

Illumination accessories

Illumination