2. Panoramica dei prodotti
  3. Riconoscimento oggetti
  4. Sensori induttivi di prossimità
  5. Robustezza
  6. Off highway
  7. IR12V.P04S-F55.NO1Z.9BDU/0035_E011
Dati tecnici
Dati generali
Mounting type
  • Flush
Special type
  • Vehicle
Nominal sensing distance Sn
  • 4 mm
Hysteresis
  • 3 … 10 % of Sr
Output indicator
  • LED red
Approvals/certificates
  • EN 60947-5-2:2007, Sec 8.6
  • EN 13309:2010 1) 3)
  • EN ISO 14982:2009 1) 2)
  • ISO 13766:2006 1)
Dati elettrici
Switching frequency
  • 2 kHz
Tensione di alimentazione +Vs
  • 7 … 48 VDC
Corrente assorbita max. (senza carico)
  • 10 mA
Circuito di uscita
  • NPN make function (NO)
Caduta di tensione Vd
  • <2 VDC
Output current
  • 200 mA
Protezione da cortocircuito
  • Si
Protezione dall'inversione di polarità
  • Si
Off-Highway Electromagnetic immunity
  • ISO 11452-4: 200mA
  • ISO 11452-2: 100V/m
  • Based on UN / ECE R10 Rev 5 ch. 6.8 (no ECE type approval available)
Off-Highway Emission
  • EN 55011
  • Based on UN / ECE R10 Rev 5 ch. 6.5, 6.6 (no ECE type approval available)
Conducted inteference
  • ISO 7637-2, ISO 16750-2, details see section "Test pulses"
Dati meccanici
Design
  • Cylindrical threaded
Material (sensing face)
  • PBT
Housing material
  • Brass nickel plated
Dimension
  • 12 mm
Housing length
  • 55 mm
Connection types
  • Flylead connector DT04-3P 3 pin, L=350 mm
Tightening torque max.
  • 15 Nm (A: 10,5 Nm, B: 10,5 Nm)
Condizioni ambientali
Temperatura d'esercizio
  • -40 … +85 °C
Tipo di protezione
  • IP 68 (sensing face/sensor)
  • IP 68 (1,5 m, 24 h)
  • IP 69K (sensing face)
Modello 3D
Modello 3D

La creazione di modelli CAD richiede una registrazione esterna presso CADENAS.

Scaricare
Data sheet
Quickstart
Certificates / approvals
EPLAN

Diagrammi
Test pulse
The selected altAttribute does not exist!

(png | 21 KB)
Disegni
Drawings
The selected altAttribute does not exist!

(png | 69 KB)
Connection diagram
The selected altAttribute does not exist!

(png | 52 KB)
Pin assignment
The selected altAttribute does not exist!

(png | 36 KB)
Correction factors for different mounting situations (approx.)
The selected altAttribute does not exist!

(png | 100 KB)
Mounting instructions
The selected altAttribute does not exist!

(png | 107 KB)
Accessori
Mounting accessories
The selected altAttribute does not exist! Sensofix series 12 round

Articolo n..: 10151720
  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
The selected altAttribute does not exist! Mounting rod with mounting plate holder 200 mm

Articolo n..: 11707685
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod with mounting plate holder 300 mm

Articolo n..: 11707686
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 200 mm

Articolo n..: 11707688
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 250 mm

Articolo n..: 11707697
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod with mounting plate holder 250 mm

Articolo n..: 11707698
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 300 mm

Articolo n..: 11707687
  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting plate series 300 and ø12 mm

Articolo n..: 11707701
  • Material: Steel
  • Part of an assembly
The selected altAttribute does not exist! Mounting base

Articolo n..: 11707702
  • Material: Plastic (PA)
  • Part of an assembly
The selected altAttribute does not exist! Two-way connector

Articolo n..: 11707703
  • Material: Plastic (PA)
  • Part of an assembly
In alto