2. Panoramica dei prodotti
  3. Riconoscimento oggetti
  4. Sensori fotoelettrici
  5. Standard con prestazioni extra
  6. Spazi ristretti
  7. O300H.EL-GW1B.PVNK
Dati tecnici
Dati generali
Type
  • Through beam sensor
Special type
  • Hygienic design
Emitter / receiver
  • Receiver
Actual range Sb
  • 40 m
Nominal range Sn
  • 75 m
Alignment / soiled lens indicator
  • Flashing light indicator
Light indicator
  • LED yellow
Power on indication
  • LED green
Sensitivity adjustment
  • Teach-in: remote
Allineamento asse ottico
  • < 2°
Approvals/certificates
  • Ecolab
  • Adapted from EHEDG
Dati elettrici
Tempo di risposta / di caduta
  • < 0,49 ms
Tensione di alimentazione +Vs
  • 10 … 30 VDC
Corrente assorbita max. (senza carico)
  • 40 mA
Corrente assorbita media
  • 30 mA
Caduta di tensione Vd
  • <3 VDC
Funzione di commutazione
  • In presenza/per assenza di luce
Circuito di uscita
  • Push-pull
Output current
  • 100 mA
Protezione da cortocircuito
  • Si
Protezione dall'inversione di polarità
  • Si
Dati meccanici
Width / diameter
  • 16,5 mm
Height / length
  • 34,6 mm
Depth
  • 28,7 mm
Design
  • Rectangular
Housing material
  • Stainless steel 1.4404 (V4A)
Front (optics)
  • PMMA
Connection types
  • Flylead connector M8, L=200 mm
Condizioni ambientali
Temperatura d'esercizio
  • -25 … +60 °C
Tipo di protezione
  • IP 68/69K & proTect+
Modello 3D
Modello 3D

La creazione di modelli CAD richiede una registrazione esterna presso CADENAS.

Scaricare
Data sheet
Quickstart
Certificates / approvals
EPLAN

Diagrammi
Excess gain curve
The selected altAttribute does not exist!

(png | 118 KB)
Disegni
Drawings
The selected altAttribute does not exist!

(png | 49 KB)
Connection diagram
The selected altAttribute does not exist!

(png | 80 KB)
Pin assignment
The selected altAttribute does not exist!

(png | 60 KB)
Laser warning
The selected altAttribute does not exist!

(png | 149 KB)
Accessori
Fitting emitter
The selected altAttribute does not exist! O300H.TL-ZZZZ.PVCK
Through beam sensors - hygiene

Articolo n..: 11181225
  • emitter
  • through beam sensor
  • 40 m
  • pulsed red laser diode
  • cable 4 pin, 2 m
  • -10 … 60 °C
  • IP 68/69K & proTect+
The selected altAttribute does not exist! O300H.TL-ZZZZ.PVNK
Through beam sensors - hygiene

Articolo n..: 11181227
  • emitter
  • through beam sensor
  • 40 m
  • pulsed red laser diode
  • flylead connector M8, L=200 mm
  • -10 … 60 °C
  • IP 68/69K & proTect+
Peripherals
The selected altAttribute does not exist! ZTEST-ALL.DIGITAL
Test unit for sensors digital

Articolo n..: 11084377
  • LED (red/green) for digital PNP/NPN signals
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
The selected altAttribute does not exist! ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Articolo n..: 11084376
  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
The selected altAttribute does not exist! ZTOOL-ALL.TPEN
Teach Pen for sensors in metal housing

Articolo n..: 11137318
  • Local Teach-in of sensors in metal housing
The selected altAttribute does not exist! ZTOOL-ALL.TPENJP
Teach Pen for sensors in metal housing (USA, CAN, JP)

Articolo n..: 11141124
  • Local Teach-in of sensors in metal housing
Mounting accessories
The selected altAttribute does not exist! HI11-1H
Mounting for sensors in hygienic design Ø 11 mm

Articolo n..: 11039552
  • Material: Stainless steel V4A
  • EHEDG-certified
In alto