Dati tecnici
Dati generali
Type
  • Retro-reflective sensor
Light source
  • Pulsed PinPoint LED
Actual range Sb
  • 5 m
Nominal range Sn
  • 6 m
Polarization filter
  • Si
Alignment / soiled lens indicator
  • Flashing output indicator
Output indicator
  • LED yellow
Power on indication
  • LED green
Wave length
  • 634 nm
Suppression of reciprocal influence
  • Si
Allineamento asse ottico
  • < 1,5°
Dati elettrici
Tempo di risposta / di caduta
  • < 0,5 ms
Tensione di alimentazione +Vs
  • 10 … 30 VDC
Corrente assorbita max. (senza carico)
  • 50 mA
Corrente assorbita media
  • 25 mA
Caduta di tensione Vd
  • <2 VDC
Funzione di commutazione
  • Dark operate
Circuito di uscita
  • Push-pull
Output current
  • 100 mA
Protezione da cortocircuito
  • Si
Protezione dall'inversione di polarità
  • Si
Dati meccanici
Width / diameter
  • 11 mm
Height / length
  • 32 mm
Depth
  • 21 mm
Design
  • Rectangular
Mechanical mounting
  • Sleeve smooth (brass)
Housing material
  • Plastic (ABS, ASA, PMMA)
Front (optics)
  • PMMA
Connection types
  • Cable 4 pin, 2 m
Cable characteristics
  • PVC / PVC 4 x 0.14 mm²
Condizioni ambientali
Temperatura d'esercizio
  • -25 … +55 °C
Tipo di protezione
  • IP 67
Storage temperature
  • -40 … +70 °C

Modello 3D
Modello 3D

La creazione di modelli CAD richiede una registrazione esterna presso CADENAS.


Scaricare
Data sheet
EPLAN

Disegni
Drawings
Connection diagram

Accessori
Reflectors
The selected altAttribute does not exist! FTDR 084A084
Reflector rectangular 84 x 84 mm

Articolo n..: 11101254

  • Fastening method screw mounting
  • For Retro-reflective sensors
The selected altAttribute does not exist! FTDR 015A038
Reflector rectangular 40 x 18 mm

Articolo n..: 10128191

  • Fastening method self-adhesive
  • For Retro-reflective sensors
The selected altAttribute does not exist! FTDR 017A027
Reflector rectangular 43 x 20,3 mm

Articolo n..: 10145962

  • Fastening method screw mounting
  • Micro structure
  • For Retro-reflective sensors
The selected altAttribute does not exist! FTDR 029A046
Reflector rectangular 48 x 32,5 mm

Articolo n..: 10125741

  • Fastening method self-adhesive
  • For Retro-reflective sensors
The selected altAttribute does not exist! FTDR 047A048
Reflector rectangular 75 x 54 mm

Articolo n..: 10145961

  • Fastening method screw mounting
  • For Retro-reflective sensors
The selected altAttribute does not exist! FTAR 013A000
Reflector round Ø 15 mm

Articolo n..: 10145963

  • Fastening method self-adhesive
  • Micro structure
  • For Retro-reflective sensors
The selected altAttribute does not exist! FTAR 019A000
Reflector round Ø 21 mm

Articolo n..: 11107543

  • Fastening method self-adhesive
  • For Retro-reflective sensors
The selected altAttribute does not exist! FTAR 020A000
Reflector round Ø 25,2 mm

Articolo n..: 10138929

  • Fastening method self-adhesive
  • Micro structure
  • For Retro-reflective sensors
The selected altAttribute does not exist! FTAR 038A000
Reflector round Ø 46 mm

Articolo n..: 11006499

  • Fastening method self-adhesive
  • For Retro-reflective sensors
The selected altAttribute does not exist! FTDF 020F020
Reflective tape rectangular 20 x 20 mm

Articolo n..: 10128299

  • Fastening method self-adhesive
  • For laser light sensors
The selected altAttribute does not exist! Z-FTDF 050K0100
Reflective type rectangular 50 x 100 mm

Articolo n..: 11120355

  • Fastening method self-adhesive
  • For Retro-reflective sensors
Peripherals
The selected altAttribute does not exist! ZTEST-ALL.DIGITAL
Test unit for sensors digital

Articolo n..: 11084377

  • LED (red/green) for digital PNP/NPN signals
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
The selected altAttribute does not exist! ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Articolo n..: 11084376

  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
Mounting accessories
The selected altAttribute does not exist! Sensofix O300/U300

Articolo n..: 11104963

  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
The selected altAttribute does not exist! Mounting bracket O300/U300 (L design)

Articolo n..: 11102423

  • Material: Steel
The selected altAttribute does not exist! Mounting bracket O300 - Retrofit for sensors series 20

Articolo n..: 11124807

  • Material: Steel
The selected altAttribute does not exist! Mounting rod with mounting plate holder 200 mm

Articolo n..: 11707685

  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod with mounting plate holder 300 mm

Articolo n..: 11707686

  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 200 mm

Articolo n..: 11707688

  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 250 mm

Articolo n..: 11707697

  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod with mounting plate holder 250 mm

Articolo n..: 11707698

  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting rod 300 mm

Articolo n..: 11707687

  • Material: Aluminium
  • Part of an assembly
  • Different lengths available
The selected altAttribute does not exist! Mounting plate series 300 and ø12 mm

Articolo n..: 11707701

  • Material: Steel
  • Part of an assembly
The selected altAttribute does not exist! Mounting base

Articolo n..: 11707702

  • Material: Plastic (PA)
  • Part of an assembly
The selected altAttribute does not exist! Two-way connector

Articolo n..: 11707703

  • Material: Plastic (PA)
  • Part of an assembly

In alto