Svizzera
ch
Italiano
Dati tecnici
Dati tecnici - Valori elettrici
- Tensione operativa
- 8...36 VDC
- Reverse polarity protection
- Yes
- Short-circuit proof
- Yes
- Tip. corrente operativa
- 30 mA (24 VDC, w/o load)
- 60 mA (24 VDC, w/o load, redundant)
- Initializing time typ.
- ≤ 0,5 s after power on
- Interface
- CANopen®
- Function
- Linear position feedback
- Profile conformity
- CANopen® CiA DS 301, DS 406, DS 410
- Measuring range
- Up to 7.8 m (linear position)
- 0...360° (inclination angle)
- Resolution
- 0,1 mm (linear position)
- 0,1 ° (inclination angle)
- Temperature coefficient
- 0,04 °/K (inclination angle)
- Linearity
- ±0.3 % (linear position)
- ±0.2° (inclination angle)
- Absolute accuracy
- ±0,6 % FS (+25 °C / linear position)
- ±1,1 % FS (-40...+85 °C / linear position)
- ±0,3 ° (+25 °C / inclination angle)
- Principio di scansione
- Magnetic
- Code sequence
- Programmable
- Load dump protection
- ISO 16750-2
- Test Level 4, 12 V/24 V systems
- Immunità alle interferenze
- EN 61000-6-2
- Emissione di interferenze
- EN 61000-6-4
- Programmable parameters
- Operating modes
- Rotating direction
- Scaling
- Zero position
Dati tecnici - progettazione meccanica
- Classe di protezione EN 60529
- IP 67 (housing, drainage holes closed)
- IP 54 (cable inlet)
- Materiale
- Cable: stainless steel cable AISI 304 coated with nylon PA12
- Housing: plastic
- Temperatura operativa
- -40...+85 °C
- Service life
- typ. 500.000 (depends on the type of load)
- Measuring length
- 6 m
- 7,8 m
- Cable acceleration
- ≤10 m/s²
- Cable speed
- ≤1 m/s
- Cable diameter
- 0,7 mm
- Cable fastening
- Eyelet
- Height: 5 mm
- Internal diameter: 8 mm
- Outer diameter: 15 mm
- Pull-in force
- >1,5 N (pull-in force reduced at low temperatures)
- Pull-out force
- ≤8 N
- Relative humidity
- 95 % non-condensing
- Resistenza
- EN 60068-2-6
- Vibrazione 10 g, 10-2000 Hz
- EN 60068-2-27
- Urti 50 g, 11 ms
- Peso ca.
- 625 g
- Allacciamento
- Cable 2 m, radial
- Flange connector M12, 5-pin
- Instruction
- Please consider the assembly instructions
software
Software
-
GCA3, GCA5 describing files
Scaricare
Data sheet
-
Schede tecniche – GCA5 - CANopen® up to 7.8 m
-
Schede tecniche – GCA5 - CANopen® up to 7.8 m
-
Schede tecniche – GCA5 - CANopen® up to 7.8 m
-
Schede tecniche – GCA5 - CANopen® up to 7.8 m
Quickstart
Software Manual
-
GCA - CANopen®
Declaration of conformity
CAD
-
GCA5 with flange connector M12 / STEP
-
GCA5 with cable / STEP