Dati tecnici
Dati tecnici - Valori elettrici
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-3
Approvazione
  • CE
Range of switching speed (ns)
  • 850...4500 rpm (Δn = 2 rpm/s)
Switching accuracy
  • ± 4 % (Δn = 2 rpm/s);
  • 20 % (Δn = 1500 rpm/s)
Switching deviation
  • ≤3 % (cw-ccw rotation)
Switching hysteresis
  • 40 % of switching speed
Switching outputs
  • 1 output, speed control
Output switching capacity
  • ≤6 A / 230 VAC
  • ≤1 A / 125 VDC
  • (EAC: <50 VAC / 75 VDC)
Minimum switching current
  • 50 mA
Reversal tolerance
  • ≤0,1 %
Linearity tolerance
  • ≤0,15 %
Temperature coefficient
  • ± 0,05 %/K (open-circuit)
Isolation class
  • B
Calibration tolerance
  • ±3 %
Climatic test
  • Humid heat, constant (IEC 60068-2-3, Ca)
Performance
  • 1.2 W (speed ≥3000 rpm)
Armature-circuit time-constant
  • <25 µs
Open-circuit voltage
  • 10...60 mV per rpm
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø85 mm
Tipo di albero
  • ø6 mm solid shaft
Carico dell‘albero massimo ammesso
  • ≤40 N assiale
  • ≤60 N radiale
Classe di protezione EN 60529
  • IP 56
Speed (n)
  • ≤1,25 · ns
Range of switching speed (ns)
  • 850...4500 rpm (Δn = 2 rpm/s)
Torque
  • 1 Ncm
Rotore momento d‘inerzia
  • 0,5 kgcm²
Materiale
  • Alloggiamento: lega pressofusa di alluminio
  • Albero: acciaio inox
Temperatura operativa
  • -30...+130 °C
Resistenza
  • IEC 60068-2-6
  • Vibrazione 5 g, 10-2000 Hz
  • IEC 60068-2-27
  • Urti 150 g, 1 ms
Allacciamento
  • 2x terminal box
Peso ca.
  • 1,6 kg

Scaricare
Data sheet
Operating Manual
Declaration of conformity

Accessori
Accessori di montaggio
The selected altAttribute does not exist! Spring disk coupling K 35 (shaft ø6...12 mm)
  • High quality torsionally stiff and backlash free coupling
  • Compensating of mounting errors
  • Balanced torsional rigidity (torsional spring constant)
  • Protection against shaft currents with an insulated hub on non-drive end (ø11 H7)
  • Additional key possible

In alto