2. Panoramica dei prodotti
  3. Encoder / sensori angolari
  4. Interruttore di velocità HeavyDuty / relè di monitoraggio velocità
  5. Interruttori di velocità meccanici
  6. HOG 86 + FSL
Dati tecnici
Dati tecnici - Valori elettrici
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-3
Approvazione
  • CE
Tensione operativa
  • 9...30 VDC
  • 5 VDC ±5 %
Corrente operativa senza carico
  • ≤100 mA
Impulsi per giro
  • 500 … 5000
Sfasamento
  • 90 ° ±20°
Rapporto ciclico
  • 45…55 %
  • 40…60 % (>3072 pulses)
Segnale di riferimento
  • Impulso zero, ampiezza 90°
Frequenza di uscita
  • ≤120 kHz
  • ≤300 kHz (on request)
Segnale di uscita
  • K1, K2, K0 + invertito
  • Error output (option EMS)
Livelli di uscita
  • HTL-P (power linedriver)
  • TTL/RS422
Principio di scansione
  • Ottico
Shaft insulation
  • Suitable up to 2.8 kV
Transmission length
  • ≤350 m at 100 kHz (HTL-P)
  • ≤550 m at 100 kHz (TTL)
Switching accuracy
  • ± 4 % (Δn = 2 rpm/s);
  • 20 % (Δn = 1500 rpm/s)
Switching deviation
  • ≤3 % (cw-ccw rotation)
Switching hysteresis
  • 40 % of switching speed
Switching outputs
  • 1 output, speed control
Output switching capacity
  • ≤6 A / 230 VAC
  • ≤1 A / 125 VDC
  • (EAC: <50 VAC / 75 VDC)
Minimum switching current
  • 50 mA
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø105 mm
Tipo di albero
  • ø16 mm (blind hollow shaft)
  • ø17 mm (cone shaft 1:10)
Carico dell‘albero massimo ammesso
  • ≤350 N assiale
  • ≤450 N radiale
Classe di protezione EN 60529
  • IP 66
Speed (n)
  • ≤1,25 · ns
Range of switching speed (ns)
  • 850...4500 rpm (Δn = 2 rpm/s)
Tip. coppia operativa
  • 6 Ncm
Rotore momento d‘inerzia
  • 200 gcm²
Materiale
  • Housing: aluminium, coated
  • Albero: acciaio inox
Temperatura operativa
  • -40...+100 °C
  • -25...+100 °C (>3072 pulses)
Resistenza
  • IEC 60068-2-6
  • Vibrazione 5 g, 10-2000 Hz
  • IEC 60068-2-27
  • Urti 50 g, 11 ms
Corrosion protection
  • IEC 60068-2-52 Salt mist
  • for ambient conditions C4 according to ISO 12944-2
Allacciamento
  • 2x terminal box
  • 3x terminal box (with option M)
Peso ca.
  • 1,9 kg
  • 2 kg (with option M)
Scaricare
Data sheet
Operating Manual
Declaration of conformity

Accessori
Accessori di montaggio
The selected altAttribute does not exist! Mounting and dismounting set

Articolo n..: 11077087

Mounting and dismounting set for fixing a blind hollow shaft encoder to the drive shaft and for dismounting the encoder from the drive shaft.
The selected altAttribute does not exist! Mounting kit earthing strap

Articolo n..: 11071906

Mounting kit earthing-strap (length of the earthing strap: ~230 mm) to fix at the encoder.
The selected altAttribute does not exist! Torque arm M6, length 67...70 mm

Articolo n..: 11043628
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 67...70 mm
The selected altAttribute does not exist! Torque arm M6, length 120...130 mm (≥71 mm)

Articolo n..: 11004078
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
The selected altAttribute does not exist! Torque arm M6, length 425...460 mm (≥131 mm)

Articolo n..: 11002915
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
The selected altAttribute does not exist! Torque arm M6 insulated, length 67...70 mm

Articolo n..: 11054917
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 67...70 mm
The selected altAttribute does not exist! Torque arm M6 insulated, length 120...130 mm (≥71 mm)

Articolo n..: 11072795
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 120...130 mm
  • Can be shortened to ≥71 mm
The selected altAttribute does not exist! Torque arm M6 insulated, length 425...460 mm (≥131 mm)

Articolo n..: 11082677
  • Torque arm for hollow shaft encoder
  • Swivel joints size M6 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 425...460 mm
  • Can be shortened to ≥131 mm
The selected altAttribute does not exist! Support plate mounting kit R63 for torque arm size M6

Articolo n..: 11071850

Support plate mounting kit R63 to fix a torque arm size M6 at the encoder.
The selected altAttribute does not exist! Support plate mounting kit R69 for torque arm size M6

Articolo n..: 11082676

Support plate mounting kit R69 to fix a torque arm size M6 at the encoder.
The selected altAttribute does not exist! Screw mounting kit for torque arm size M6

Articolo n..: 11072076

Screw mounting kit to fix a torque arm size M6 direct to the encoder (without support plate).
The selected altAttribute does not exist! Mounting kit for torque arm size M6

Articolo n..: 11071904

Mounting kit for fixing a torque arm size M6.
Connettori e cavi
The selected altAttribute does not exist! Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
In alto