optoTurn EN580E.ML-TT12.G$$1G.13120.H/11250131

Articolo n..: 11250131

Absolute encoder multiturn
Optical sensing method
Resolution: singleturn 13 bit, multiturn 12 bit
Maximum resistant against magnetic fields
High connection flexibility thanks to flexible M12 and flylead connector
M23

disponibilità su richiesta

Dati tecnici

mostra tutti

Dati tecnici - Valori elettrici

Tensione operativa

8...30 VDC

Reverse polarity protection

Short-circuit proof

Corrente operativa senza carico

≤80 mA (24 VDC)

Interface

Function

Multiturn

Steps per revolution

8192 / 13 bit

Number of revolutions

4096 / 12 bit

Absolute accuracy

±0,03 °

Principio di scansione

Ottico

Code

Gray

Code sequence

CW: ascending values with clockwise sense of rotation (looking at flange)

Input signals

SSI clock
Zero setting input
Counting direction

Livelli di uscita

SSI data: Linedriver RS422

Segnale di uscita

SSI data

Immunità alle interferenze

EN 61000-6-2

Emissione di interferenze

EN 61000-6-4

Approvazione

UL-Listing: E217823

Dati tecnici - progettazione meccanica

Grandezza (flangia)

ø58 mm

Tipo di albero

ø12 mm (through hollow shaft)

Classe di protezione EN 60529

IP 54 (flange side)
IP 65 (housing side)

Velocità operativa

≤6000 rpm (+25 °C)

Coppia di spunto

≤0,04 Nm

Motor shaft tolerance

± 0,2 mm (axial offset)
≤ 0,1 mm (radial offset)
≤ 0,1 mm (concentricity)

Materiale

Housing: aluminium
Albero: acciaio inox

Temperatura operativa

-25...+85 °C (see general information)

Relative humidity

95 % non-condensing

Resistenza

IEC 60068-2-6
Vibrazione ±0,75 mm - 10-58 Hz, 10 g - 58-2000 Hz
EN 60068-2-27
Urti 100 g, 11 ms

Peso ca.

400 g

Allacciamento

Flange connector M23, 12-pin, CW (option 3252)

Scaricare

mostra tutti

Data sheet

Schede tecniche – EN580E.ML-TT12.G$$1G.13120.H/11250131
- FR (pdf | 1021 KB)
Schede tecniche – EN580E.ML-TT12.G$$1G.13120.H/11250131
- DE (pdf | 1006 KB)
Schede tecniche – EN580E.ML-TT12.G$$1G.13120.H/11250131
- EN (pdf | 1003 KB)

Quickstart

EN580E.ML
- DE/EN/FR (pdf | 2 MB)

Certificates / approvals

UL-Listing: E217823
- (pdf | 263 KB)

CAD

EN580E.ML - through hollow shaft ø12 mm, flange connector M23
- (zip | 458 KB)

EPLAN

Link al portale dati
- Link al portale dati

Accessori

mostra tutti

Accessori di montaggio

	Torque arm, 1-arm (mounting kit 006) Bolt circle ø74…94 mm, mounting M4/M5 Articolo n..: 11066083	For low-dynamic applications and constant movements
	Torque arm, 1-arm (mounting kit 021) Bolt circle ø65.5...281 mm, mounting M4, can be cut to length Articolo n..: 11073119	Universal mounting option by several pitch diameters.
	Torque arm, 1-arm (mounting kit 028) Bolt circle ø74…94 mm, mounting M6 Articolo n..: 11067367	For low-dynamic applications and constant movements
	Torque arm, 1-arm (mounting kit 047) Bolt circle ø63...94 mm, mounting M4 Articolo n..: 11113210	Universal torque arm for mounting hole circle 63...94 mm Flexible 30° alignment
	Torque arm, 1-arm (mounting kit 048) Bolt circle ø76.5...83 mm, mounting M4 Articolo n..: 11124300	For low-dynamic applications and constant movements
	Fan cover clip 8 mm Articolo n..: 11106627	Encoder mount directly on the fan cover Self-holding clip for 8 mm grid dimension For quick and easy installation Operating temperature -40…+85 °C Fan cover clip made of polyamide 6.6 (PA 6.6)
	Insulating sleeve ø10 mm/ø12 mm/25 mm long Articolo n..: 11116921	Insulating sleeve to protect against wave currents Suitable for motor shaft diameter 10 mm
	Insulating sleeve ø12 mm/ø14 mm/25 mm long Articolo n..: 11116923	Insulating sleeve to protect against wave currents Suitable for motor shaft diameter 12 mm
	Stator coupling, 2-arm - EN5xx / ø68 mm / M3 Bolt circle ø68 mm, mounting M3 Articolo n..: 11730156	Stainless steel stator coupling Can be retrofitted due to standard dimensions Mounting bolt circle ø68 mm Screws (4xM3) for coupling mounting to the encoder flange are included Application-side fastening screws not included in delivery
	Stator coupling, 2-arm - EN5xx / ø68 mm / M4 Bolt circle ø68 mm, mounting M4 Articolo n..: 11730157	Stainless steel stator coupling Can be retrofitted due to standard dimensions Mounting bolt circle ø68 mm Screws (4xM3) for coupling mounting to the encoder flange are included Application-side fastening screws not included in delivery
	Stator coupling, 2-arm - EN5xx / ø73 mm / M3 Bolt circle ø73 mm, mounting M3 Articolo n..: 11730158	Stainless steel stator coupling Can be retrofitted due to standard dimensions Mounting bolt circle ø73 mm Screws (4xM3) for coupling mounting to the encoder flange are included Application-side fastening screws not included in delivery
	Stator coupling, 2-arm (mounting kit 207) Bolt circle ø63 mm, mounting M3 Articolo n..: 11721627	For high-dynamic applications.

Cavi con fili aperti

	Female connector M23, 12-pin, 5 m cable (Z 130.005) Articolo n..: 10126594	Female connector M23 with screwable nut With or without cable (shielded) in different lengths Cable version: shield is placed onto the connector housing
	Female connector M23, 12-pin, 10 m cable (Z 130.007) Articolo n..: 10129757	Female connector M23 with screwable nut With or without cable (shielded) in different lengths Cable version: shield is placed onto the connector housing
	Female connector M23, 12-pin, 2 m cable (Z 130.003) Articolo n..: 10138559	Female connector M23 with screwable nut With or without cable (shielded) in different lengths Cable version: shield is placed onto the connector housing
	Female connector M23, 12-pin, without cable (Z 130.001) Articolo n..: 11034154	Female connector M23 with screwable nut With or without cable (shielded) in different lengths Cable version: shield is placed onto the connector housing
	Female connector M23, 12-pin, 3 m cable (Z 130.004) Articolo n..: 11034156	Female connector M23 with screwable nut With or without cable (shielded) in different lengths Cable version: shield is placed onto the connector housing
	Female connector M23, 12-pin, 15 m cable (Z 130.M15) Articolo n..: 11042991	Female connector M23 with screwable nut With or without cable (shielded) in different lengths Cable version: shield is placed onto the connector housing