2. Panoramica dei prodotti
  3. Contatori / Display
  4. Contatori a preselezione
  5. Contatori a preselezione elettronici
  6. NE210
Dati tecnici
Dati tecnici - Valori elettrici
Tensione operativa
  • 85...265 VAC (50/60 Hz)
  • 24 VDC ±10 %
Power consumption
  • 5 VA
  • 5 W
Sensor supply
  • 85...265 VAC: 24 VDC ±20 %/100 mA
  • 24 VDC: 24 VDC ±20 %/100 mA
Display
  • LED, 7-segment display
Number of digits
  • 5-digits
Digit height
  • 7,6 mm
Function
  • Preset counter
  • Main counter with 1 preset
Scaling factor
  • 0.001...99.999
Count mode
  • Adding or subtracting
  • Difference counting A-B
  • Total (parallel) A+B
  • Up/Down
  • A 90° B phase evaluation
Counting frequency
  • 15 Hz, 10 kHz (set by Dip switch)
Preset
  • 1 preset
Operating mode
  • Main preset
  • Time meter / time relay
Data memory
  • >10 years in EEPROM
Reset
  • Button, electric or automatic
Outputs electronic
  • NPN / PNP transistor switch
Outputs relay
  • Change-over contact, floating
Output holding time
  • 0.01...99.99 s
Standard DIN EN 61010‑1
  • Protection class II
  • Overvoltage category II
  • Pollution degree 2
Emissione di interferenze
  • EN 61000-6-4
Immunità alle interferenze
  • EN 61000-6-2
Programmable parameters
  • Operating modes
  • Sensor logic
  • Scaling factor
  • Count mode
  • Time relay function
Approvazione
  • UL approval / E63076
Dati tecnici - progettazione meccanica
Ambient temperature
  • 0...+50 °C
Storage temperature
  • -20...+70 °C
Relative humidity
  • 80 % non-condensing
Allacciamento
  • Plug-in screw terminal connector
Core cross-section
  • 1.5 mm²
Classe di protezione EN 60529
  • IP 65 (face with seal)
Operation / keypad
  • Membrane with softkeys
Housing type
  • Built-in housing
Dimensions W x H x L
  • 48 x 48 x 108 mm
Mounting depth
  • 108 mm
Mounting type
  • Clip frame for built-in housing
Cutout dimensions
  • 45 x 45 mm (+0.6)
Peso ca.
  • 150 g (24 VDC/85-265 VAC)
  • 260 g (24/48 VAC)
Materiale
  • Housing: Makrolon 6485 (PC)
  • Keypad: Polyester
Scaricare
Data sheet
Operating Manual
Certificates / approvals
Declaration of conformity
CAD

Disegni
Drawings
The selected altAttribute does not exist!

(png | 32 KB)
In alto