Svizzera
ch
Italiano
Dati tecnici
- Head A: Connection
- M12
- Head A: Angle cable outlet
- 0°
- Head A: Gender
- Male
- Head A: Coding
- A
- Head A: No. of poles
- 5
- Head A: LED
- No
- Head A: Width across flats
- AF13
- Head A: Tightening torque
- 0,6 Nm
- Head A: Knurled nut material
- Zinc-pressure die casting, surface Ni
- Head A: Body color
- Black
- Labeling sleeve side A
- Yes
- Head B: Connection
- M12
- Head B: Angle cable outlet
- 90°
- Head B: Gender
- Female
- Head B: Coding
- A
- Head B: No. of poles
- 5
- Head B: LED
- No
- Head B: Width across flats
- AF13
- Head B: Knurled nut material
- Zinc-pressure die casting, surface Ni
- Head B: Body color
- Black
- Head B: Gasket material
- FKM
- Labeling sleeve side B
- Yes
- Cable length
- 500 cm
- Shielded
- No
- AWG
- 22
- External sheath: Material
- PUR
- External sheath: Color
- Black
- Wire cross section
- 0.34 mm²
Cavo
- Shielded
- No
- Cable length
- 500 cm
- AWG
- 22
- Torsion speed
- max. 35 cycles/min
- Cable type
- 3
- Conductor: Material
- Copper, bare
- External sheath: Material
- PUR
- Insulation: Material
- PP
- Paired stranding
- No
- Torsion stress in °
- ± 180 °/m
- Total stranding
- 5 wires strand around core-filler
- Wire cross section
- 0.34 mm²
- Wire processing
- No
- External sheath: Color
- Black
Dati meccanici
- Head A: Degree of protection
- IP65, IP66K, IP67
- Head B: Degree of protection
- IP65, IP66K, IP67
- Torsion speed
- max. 35 cycles/min
- Torsion stress in °
- ± 180 °/m
Condizioni ambientali
- Dragchain capable
- Sì
- Head A: Chemical resistance
- No
- Head A: Flame resistance
- HB (UL 94)
- Head A: Oil resistance
- Good resistance to ASTM 1 oil and mineral oils. Limited resistance to hydraulic oils. If other oils are used, the resistance must be checked in relation to the application.
- Head A: Acid and alkali resistant
- No
- Head A: Pollution degree
- 3
- Head B: Chemical resistance
- No
- Head B: Flame restistance
- HB (UL 94)
- Head B: Oil resistance
- Good resistance to ASTM 1 oil and mineral oils. Limited resistance to hydraulic oils. If other oils are used, the resistance must be checked in relation to the application.
- Head B: Acid and alkali resistant
- No
- Head B: Pollution degree
- 3
- Cable: Chemical resistance
- Good (DIN EN 60811-404)
- Cable: Flame resistance
- Conform UL 1581 §1090 (H)
- Cable: Oil resistance
- Good (DIN EN 60811-404)
- Cable: Silicone-free
- Sì
- Eclass
- 27060311
Scaricare
Data sheet
-
Schede tecniche – CAM12.A5-11249649
-
Schede tecniche – CAM12.A5-11249649
-
Schede tecniche – CAM12.A5-11249649