2. ATD2AH00
Dati tecnici
Dati tecnici - Valori elettrici
Tensione operativa
  • +UB= 12...30 VDC (IS-/US-version)
Reverse polarity protection
  • Yes
Corrente operativa senza carico
  • ≤50 mA (24 VDC)
Interface
  • Analog (4...20 mA or 0...10 V)
Load resistor
  • ≥1 kΩ (recommended 10 kΩ) / voltage output
  • ≤500 Ω (recommended 470 Ω) / current output
Function
  • Singleturn
Measuring range
  • 90°, 180°, 360°
Steps per revolution
  • 16384 / 14 bit
Principio di scansione
  • Ottico
Updating values
  • ≤130 µs
Code sequence
  • CW: ascending values with clockwise sense of rotation (looking at mounting surface)
Livelli di uscita
  • Voltage output (short-circuit proof)
  • Current output (short-circuit proof)
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-3
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø58 mm
Tipo di albero
  • ø10 mm (through hollow shaft)
  • ø12 mm (through hollow shaft)
  • ø14 mm (through hollow shaft)
Classe di protezione EN 60529
  • IP 65
Velocità operativa
  • ≤6000 giri/min (meccanico)
  • ≤6000 rpm (electric)
Coppia di spunto
  • ≤0,01 Nm (+20 °C)
Materiale
  • Housing: aluminium
  • Shaft: stainless steel
Temperatura operativa
  • -20...+85 °C
Relative humidity
  • 90 % non-condensing
Resistenza
  • EN 60068-2-6
  • Vibrazione 10 g, 55-2000 Hz
  • EN 60068-2-27
  • Urti 30 g, 11 ms
Peso ca.
  • 150 g
Allacciamento
  • Board connector, 8-pin
Scaricare
Data sheet
Operating Manual
Declaration of conformity
CAD

Accessori
Accessori di montaggio
The selected altAttribute does not exist! Mounting kit 002
Torque arm, 1-arm, bolt circle ø76…80 mm, mounting M4

Articolo n..: 11066080
  • For low-dynamic applications and constant movements
The selected altAttribute does not exist! Torque arm, 1-arm (mounting kit 006)
Bolt circle ø74…94 mm, mounting M4/M5

Articolo n..: 11066083
  • For low-dynamic applications and constant movements
The selected altAttribute does not exist! Torque arm, 3-armed (mounting kit 019)
Bolt circle ø76 mm, mounting M3

Articolo n..: 11073114
  • For high-dynamic applications.
The selected altAttribute does not exist! Torque arm, 1-arm (mounting kit 021)
Bolt circle ø65.5...281 mm, mounting M4, can be cut to length

Articolo n..: 11073119
  • Universal mounting option by several pitch diameters.
The selected altAttribute does not exist! Torque arm, 1-arm (mounting kit 092)
Bolt circle ø110…130 mm, mounting M5

Articolo n..: 11069239
  • For low-dynamic applications and constant movements
The selected altAttribute does not exist! Insulating sleeve ø10 mm/ø12 mm/25 mm long

Articolo n..: 11116921
  • Insulating sleeve to protect against wave currents
  • Suitable for motor shaft diameter 10 mm
The selected altAttribute does not exist! Insulating sleeve ø12 mm/ø14 mm/25 mm long

Articolo n..: 11116923
  • Insulating sleeve to protect against wave currents
  • Suitable for motor shaft diameter 12 mm
Connettori e cavi
The selected altAttribute does not exist! Connection cable with FCI, 8-pin / wire end sleeves (UL/CSA), 1 m

Articolo n..: 11072169
  • Shielded connection cable with FCI-female coupling (8-pin) and stranded wires 0.14 mm² with wire end sleeves
  • UL/CSA certification
  • Assembly by customer possible
The selected altAttribute does not exist! Connection cable with FCI, 8-pin / wire end sleeves (UL/CSA), 2 m

Articolo n..: 11093848
  • Shielded connection cable with FCI-female coupling (8-pin) and stranded wires 0.14 mm² with wire end sleeves
  • UL/CSA certification
  • Assembly by customer possible
The selected altAttribute does not exist! Connection cable with FCI, 8-pin / wire end sleeves (UL/CSA), 3 m

Articolo n..: 11092928
  • Shielded connection cable with FCI-female coupling (8-pin) and stranded wires 0.14 mm² with wire end sleeves
  • UL/CSA certification
  • Assembly by customer possible
The selected altAttribute does not exist! Connection cable with FCI, 8-pin / wire end sleeves (UL/CSA), 5 m

Articolo n..: 11077007
  • Shielded connection cable with FCI-female coupling (8-pin) and stranded wires 0.14 mm² with wire end sleeves
  • UL/CSA certification
  • Assembly by customer possible
The selected altAttribute does not exist! Connection cable with FCI, 8-pin / wire end sleeves (UL/CSA), 10 m

Articolo n..: 11080879
  • Shielded connection cable with FCI-female coupling (8-pin) and stranded wires 0.14 mm² with wire end sleeves
  • UL/CSA certification
  • Assembly by customer possible
The selected altAttribute does not exist! Connection cable with rear mount socket M23, 12-pin, 1 m

Articolo n..: 11079089
  • Shielded connection cable with rear mount socket M23, 12-pin
  • UL/CSA certification
  • Assembly by customer possible
The selected altAttribute does not exist! Connection cable with FCI, 8-pin / D-SUB, 9-pin, 0.3 m

Articolo n..: 11106562
  • Shielded connection cable with FCI-female coupling (8-pin) and D-SUB-male connector (9-pin)
  • UL/CSA certification
  • Assembly by customer possible
The selected altAttribute does not exist! Connection cable with FCI, 8-pin / D-SUB, 9-pin, 1 m

Articolo n..: 11079111
  • Shielded connection cable with FCI-female coupling (8-pin) and D-SUB-male connector (9-pin)
  • UL/CSA certification
  • Assembly by customer possible
The selected altAttribute does not exist! Connection cable with coupling M12, 8-pin, 1 m

Articolo n..: 11079113
  • Shielded connection cable with coupling M12, 8-pin
  • UL/CSA certification
  • Temperature range -20...+100 °C (-40...+100 °C with fixed installation)
  • Assembly by customer possible
In alto