2. GPI0W
Dati tecnici
Dati tecnici - Valori elettrici
Tensione operativa
  • 10...30 VDC
Reverse polarity protection
  • Yes
Corrente operativa senza carico
  • ≤30 mA (24 VDC)
Impulsi per giro
  • 50 … 500
Segnale di riferimento
  • Impulso zero, ampiezza 90°
Principio di scansione
  • Ottico
Frequenza di uscita
  • ≤150 kHz
Segnale di uscita
  • A 90° B, N
Livelli di uscita
  • Push-pull short-circuit proof
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-4
Approvazione
  • UL approval / E63076
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø58 mm
Tipo di albero
  • ø6 mm solid shaft (synchro flange)
  • ø10 mm solid shaft (clamping flange)
Carico dell‘albero massimo ammesso
  • ≤20 N assiale
  • ≤40 N radiale
Flangia
  • Clamping or synchro flange
Classe di protezione EN 60529
  • IP 54
Velocità operativa
  • ≤10000 rpm
Coppia di spunto
  • ≤0,015 Nm (+25 °C, IP 54)
Rotore momento d‘inerzia
  • 14,5 gcm²
Materiale
  • Housing: aluminium
  • Flange: aluminium
Temperatura operativa
  • -25...+85 °C
Relative humidity
  • 95 % non-condensing
Resistenza
  • EN 60068-2-6
  • Vibrazione 10 g, 16-2000 Hz
  • EN 60068-2-27
  • Urti 200 g, 6 ms
Allacciamento
  • Cable 2 m
  • Cable 5 m
  • Cable 10 m
Peso ca.
  • 250 g
Scaricare
Data sheet
Quickstart
Certificates / approvals
Declaration of conformity

Disegni
Drawings
The selected altAttribute does not exist!

(png | 91 KB)
Accessori
Accessori di montaggio
The selected altAttribute does not exist! Set of eccentric fixings type A

Articolo n..: 11065545
  • With 3 eccentric fixings type A
The selected altAttribute does not exist! Adaptor plate for clamping flange to convert into synchro flange

Articolo n..: 10141255
  • Adaptor plate for encoder with clamping flange for modification into synchro flange
The selected altAttribute does not exist! Mounting adaptor
For encoders with synchro flange

Articolo n..: 10117667
  • Glass-fiber reinforced plastic
  • Excellent resistance against temperature and chemicals
  • Electrically isolated encoder mount
The selected altAttribute does not exist! Set of eccentric fixings for mounting clamp (10117667)

Articolo n..: 10117668
  • With 3x eccentric fixings, screws and nuts
The selected altAttribute does not exist! Mounting adaptor
For encoders with clamping flange

Articolo n..: 10125051
  • Glass-fiber reinforced plastic
  • Excellent resistance against temperature and chemicals
  • Electrically isolated encoder mount
The selected altAttribute does not exist! Adaptor plate for clamping flange, mounting by eccentric fixings (order separately) (Z 119.025)

Articolo n..: 11034088
  • Adaptor plate for clamping flange with 3x screws
The selected altAttribute does not exist! Bearing flange for encoders with synchro flange (Z 119.035)

Articolo n..: 10158124
  • For all encoder with synchro flange and 6 mm shaft
  • Material: Aluminium, bare
The selected altAttribute does not exist! Spring washer coupling (D1=6 / D2=6)
For encoder with solid shaft

Articolo n..: 10141131
  • Backlash-free and angle-synchronous transmission of rotary movements
  • Plug-in version
  • Electric isolated
  • Suitable for very high speeds
  • Good compensation of all misalignments
The selected altAttribute does not exist! Spring washer coupling (D1=6 / D2=10)
For encoder with solid shaft

Articolo n..: 10141132
  • Backlash-free and angle-synchronous transmission of rotary movements
  • Plug-in version
  • Electric isolated
  • Suitable for very high speeds
  • Good compensation of all misalignments
The selected altAttribute does not exist! Spring washer coupling (D1=10 / D2=10)
For encoder with solid shaft

Articolo n..: 10141133
  • Backlash-free and angle-synchronous transmission of rotary movements
  • Plug-in version
  • Electric isolated
  • Suitable for very high speeds
  • Good compensation of all misalignments
In alto