2. HOG 28
Dati tecnici
Dati tecnici - Valori elettrici
Tensione operativa
  • 9...26 VDC
  • 5 VDC ±5 %
Corrente operativa senza carico
  • ≤100 mA
Impulsi per giro
  • 1024 … 2048
Sfasamento
  • 90 ° ±20°
Rapporto ciclico
  • 40…60 %
Segnale di riferimento
  • Impulso zero, ampiezza 90°
Principio di scansione
  • Ottico
Frequenza di uscita
  • ≤120 kHz
Segnale di uscita
  • K1, K2, K0 + invertito
Livelli di uscita
  • HTL
  • TTL/RS422
Immunità alle interferenze
  • EN 61000-6-2
Emissione di interferenze
  • EN 61000-6-3
Approvazione
  • CE
  • UL approval / E217823
Dati tecnici - progettazione meccanica
Grandezza (flangia)
  • ø287 mm
Tipo di albero
  • ø120...150 mm (through hollow shaft)
Carico dell‘albero massimo ammesso
  • ≤550 N assiale
  • ≤800 N radiale
Classe di protezione EN 60529
  • IP 54
Velocità operativa
  • ≤3600 giri/min (meccanico)
Tip. coppia operativa
  • 50 Ncm
Rotore momento d‘inerzia
  • 240 kgcm² (ø150)
Materiale
  • Housing: aluminium alloy
  • Albero: acciaio inox
Temperatura operativa
  • -30...+85 °C
Resistenza
  • IEC 60068-2-6
  • Vibrazione 10 g, 10-2000 Hz
  • IEC 60068-2-27
  • Urti 200 g, 6 ms
Corrosion protection
  • IEC 60068-2-52 Salt mist
  • for ambient conditions C4 according to ISO 12944-2
Protezione da esplosione
  • II 3 G Ex ec IIC T4 Gc (gas)
  • II 3 D Ex tc IIIB T135°C Dc (dust)
  • (only with option ATEX)
Allacciamento
  • Terminal box (2x with option M)
  • Flange connector M23, 12-pin (2x with option M)
Peso ca.
  • 20 kg (ø150)
Scaricare
Data sheet
Operating Manual
Declaration of conformity
CAD

Accessori
Accessori di montaggio
The selected altAttribute does not exist! Torque arm M12, length 145...170 mm

Articolo n..: 11054922
  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 145...170 mm
The selected altAttribute does not exist! Torque arm M12, length 180...205 mm

Articolo n..: 11054921
  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 180...205 mm
The selected altAttribute does not exist! Torque arm M12, length 480...540 mm (≥200 mm)

Articolo n..: 11072741
  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Standard version
  • Length 480...540 mm
  • Can be shortened to ≥200 mm
The selected altAttribute does not exist! Torque arm M12 insulated, length 145...170 mm

Articolo n..: 11054924
  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 145...170 mm
The selected altAttribute does not exist! Torque arm M12 insulated, length 480...540 mm (≥200 mm)

Articolo n..: 11072723
  • Torque arm for hollow shaft encoder
  • Swivel joints size M12 according to DIN ISO 12240-4, size series K
  • Compensate for mounting tolerances of the drive shaft in an axial direction
  • Insulated version
  • Length 480...540 mm
  • Can be shortened to ≥200 mm
The selected altAttribute does not exist! Mounting kit for torque arm size M12 and an earthing strap

Articolo n..: 11069336

Mounting kit for fixing a torque arm size M12 and an earthing strap.
Connettori e cavi
The selected altAttribute does not exist! Sensor cable for encoders HEK 8

The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors.
In alto