Dati tecnici
Dati generali
Type
  • Through beam sensor
Special type
  • Hygienic design
Emitter / receiver
  • Receiver
Actual range Sb
  • 10 m
Nominal range Sn
  • 15 m
Alignment / soiled lens indicator
  • Flashing light indicator
Light indicator
  • LED yellow
Power on indication
  • LED green
Sensitivity adjustment
  • Teach-in: remote
Allineamento asse ottico
  • < 2°
Approvals/certificates
  • Ecolab
  • Adapted from EHEDG
Dati elettrici
Tempo di risposta / di caduta
  • < 0,49 ms
Tensione di alimentazione +Vs
  • 10 … 30 VDC
Corrente assorbita max. (senza carico)
  • 40 mA
Corrente assorbita media
  • 30 mA
Caduta di tensione Vd
  • <3 VDC
Funzione di commutazione
  • In presenza/per assenza di luce
Circuito di uscita
  • Push-pull
Output current
  • 100 mA
Protezione da cortocircuito
  • Si
Protezione dall'inversione di polarità
  • Si
Dati meccanici
Width / diameter
  • 16,5 mm
Height / length
  • 34,6 mm
Depth
  • 28,7 mm
Design
  • Rectangular
Housing material
  • Stainless steel 1.4404 (V4A)
Front (optics)
  • PMMA
Connection types
  • Flylead connector M8, L=200 mm
Condizioni ambientali
Temperatura d'esercizio
  • -25 … +60 °C
Tipo di protezione
  • IP 68/69K & proTect+

Modello 3D
Modello 3D

La creazione di modelli CAD richiede una registrazione esterna presso CADENAS.


Scaricare
Data sheet
Quickstart
EPLAN

Diagrammi
Excess gain curve

Disegni
Drawings
Connection diagram
Pin assignment

Accessori
Fitting emitter
The selected altAttribute does not exist! O300H.TR-ZZZZ.PVCK
Through beam sensors - hygiene

Articolo n..: 11167291

  • emitter
  • through beam sensor
  • 10 m
  • pulsed red LED
  • cable 4 pin, 2 m
  • -25 … 60 °C
  • IP 68/69K & proTect+
The selected altAttribute does not exist! O300H.TR-ZZZZ.PVNK
Through beam sensors - hygiene

Articolo n..: 11167292

  • emitter
  • through beam sensor
  • 10 m
  • pulsed red LED
  • flylead connector M8, L=200 mm
  • -25 … 60 °C
  • IP 68/69K & proTect+
Peripherals
ZTEST-ALL.DIGITAL
Test unit for sensors digital

Articolo n..: 11084377

  • LED (red/green) for digital PNP/NPN signals
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Articolo n..: 11084376

  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
The selected altAttribute does not exist! ZTOOL-ALL.TPEN
Teach Pen for sensors in metal housing

Articolo n..: 11137318

  • Local Teach-in of sensors in metal housing
The selected altAttribute does not exist! ZTOOL-ALL.TPENJP
Teach Pen for sensors in metal housing (USA, CAN, JP)

Articolo n..: 11141124

  • Local Teach-in of sensors in metal housing
Mounting accessories
HI11-1H
Mounting for sensors in hygienic design Ø 11 mm

Articolo n..: 11039552

  • Material: Stainless steel V4A
  • EHEDG-certified

In alto