2. Miniatura
  3. FEDM 12P5101
Dati tecnici
Dati generali
Type
  • Through beam sensor
Emitter / receiver
  • Receiver
Actual range Sb
  • 6 m
Nominal range Sn
  • 7,5 m
Alignment / soiled lens indicator
  • Flashing light indicator
Light indicator
  • LED yellow
Sensitivity adjustment
  • No
Dati elettrici
Tempo di risposta / di caduta
  • < 1 ms
Tensione di alimentazione +Vs
  • 10 … 30 VDC
Corrente assorbita max. (senza carico)
  • 17 mA
Corrente assorbita media
  • 17 mA
Caduta di tensione Vd
  • <1,8 VDC
Funzione di commutazione
  • In presenza/per assenza di luce
Circuito di uscita
  • PNP
Output current
  • 100 mA
Protezione da cortocircuito
  • Si
Protezione dall'inversione di polarità
  • Si
Dati meccanici
Width / diameter
  • 12,4 mm
Height / length
  • 35 mm
Depth
  • 35 mm
Design
  • Rectangular
Housing material
  • Die-cast zinc
Front (optics)
  • PMMA
Connection types
  • Cable 4 pin, 2 m
Condizioni ambientali
Temperatura d'esercizio
  • -25 … +65 °C
Tipo di protezione
  • IP 67
Scaricare
Data sheet
Quickstart
Certificates / approvals
CAD
EPLAN

Disegni
Drawings
The selected altAttribute does not exist!

(png | 11 KB)
Connection diagram
The selected altAttribute does not exist!

(png | 70 KB)
Accessori
Fitting emitter
The selected altAttribute does not exist! FSDM 12D9601
Through beam sensors - miniature

Articolo n..: 10234245
  • emitter
  • through beam sensor
  • 6 m
  • pulsed red LED
  • cable 3 pin, 2 m
  • -25 … 65 °C
  • IP 67
The selected altAttribute does not exist! FSDM 12D9601/S35A
Through beam sensors - miniature

Articolo n..: 10234246
  • emitter
  • through beam sensor
  • 6 m
  • pulsed red LED
  • connector M8 4 pin
  • -25 … 65 °C
  • IP 67
Peripherals
The selected altAttribute does not exist! ZTEST-ALL.DIGITAL
Test unit for sensors digital

Articolo n..: 11084377
  • LED (red/green) for digital PNP/NPN signals
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
The selected altAttribute does not exist! ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Articolo n..: 11084376
  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
Mounting accessories
The selected altAttribute does not exist! 10150328
Sensofix series 12

Articolo n..: 10150328
  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
The selected altAttribute does not exist! 10113873
Mounting bracket series 12 (L design)

Articolo n..: 10113873
  • Material: Steel
In alto