VAX-50C.I.NVX

• power supply 24V/1,0A with adapters for EU, US, UK AU, KR
• in combination with "Cable power adapter M12/DC connector" (11048083) suitable for VCXG.I(.XT), VLXT, VAX and VeriSens

• GigE PCIe interface board
• GigE cable 5,0 m (M12/x-coded)
• Power Supply 24 V/1.0 A with adapter cable M12/12-pin to DC connector
• Mounting Adapter Type B (Tripod)
• Tube system M47 with adapter (11185373) and tube (11185370)
• camera not included

• Gigabit Ethernet network adapter
• PCIe x1 (single lane)
• server adapter
• single GigE port
• supports screw lock connectors

• Gigabit Ethernet network adapter
• PCIe x2 (dual lane)
• server adapter
• single GigE port

• Gigabit Ethernet interface board
• PCIe x4 (quad lane)
• Dual GigE port
• Note: 4 lane PCI Express connector required

Cover for rear side of VAX cameras

• camera mounting adapter for VAX cameras incl. screws

• stable bottom and tripod mounting

• adapter to mount the Tube M47 hard anodized (11185370/11195425) to VCXG.I and VAX cameras
• thread: M47
• length 2 mm

• hard anodized lens protection with M47 thread
• optional tube extension with Tube Module 6mm (11185372) or Tube Module (11185371), length 12 mm. Use of several Tube Modules possible.
• thread: M47
• length 44 mm

• modular extension of the lens protection
• thread: M47
• length 6 mm

• modular extension of the lens protection
• thread: M47
• length 12 mm

• modular extension of the lens protection
• thread: M47
• length 36 mm

• adapter to mount the Tube M62 hard anodized (11185374/11701125) to VCXG.I and VAX cameras
• thread: M62
• length 2 mm

• hard anodized lens protection with M62 thread
• optional tube extension with Tube Module 6mm (11185376), Tube Module 12 mm (11185375) or Tube Module 36 mm (11198906). Use of several Tube Modules possible.
• thread: M62
• length 58 mm

• modular extension of the lens protection
• thread: M62
• length 6 mm

• modular extension of the lens protection
• thread: M62
• length 12 mm

• modular extension of the lens protection
• thread: M62
• length 36 mm

• hard anodized lens protection with scratchproof laminated safety glass: Corning^® Gorilla^® glass (Generation 3)
• optional tube extension with Tube Module 6mm (11185372) or Tube Module (11185371), length 12 mm. Use of several Tube Modules possible.
• thread: M47
• length 44 mm

• hard anodized lens protection with scratchproof laminated safety glass: Corning^® Gorilla^® glass (generation 3)
• optional tube extension with Tube Module 6mm (11185376), Tube Module 12 mm (11185375) or Tube Module 36 mm (11198906). Use of several Tube Modules possible.
• thread: M62
• length 58 mm

• Ricoh color filter (red)

• Ricoh polarization filter
• linear
• filter thread

• Ricoh polarization filter
• linear
• filter thread M30.5

• Ricoh polarization filter
• linear
• filter thread M40.5

• Adapter S-mount / C-mount

• Mounting tool to screw in filter holders

• Close-up ring set ZVS-FP-RGST six-piece 0,5, 1, 5, 10, 20, 40 mm

• Computar lens
• 8 mm
• F 2,8-16
• format 2/3″
• M.O.D. 0,1 m
• locating screw for aperture and focus
• C-mount

• Computar lens
• 12 mm
• F 2,8-16
• format 2/3″
• M.O.D. 0,1 m
• locating screw for aperture and focus
• C-mount

• Computar lens
• 16 mm
• F 2,8-16
• format 2/3″
• M.O.D. 0,25 m
• locating screw for aperture and focus
• C-mount

• Computar lens
• 25 mm
• F 2,8-16
• format 2/3″
• M.O.D. 0,2 m
• locating screw for aperture and focus
• C-mount

• Computar lens
• 35 mm
• F 2,8-16
• format 2/3″
• M.O.D. 0,25 m
• locating screw for aperture and focus
• C-mount

• Computar lens
• 50 mm
• F 2,8-16
• format 2/3″
• M.O.D. 0,3 m
• locating screw for aperture and focus
• C-mount

• Kowa lens
• 6 mm
• F 1,8-16
• format 1"
• M.O.D. 0,1 m
• C-mount

• Kowa lens
• 8 mm
• F 1,4-16
• format 1"
• M.O.D. 0,1 m
• C-mount

• Kowa lens
• 12,5 mm
• F 1,4-16
• format 1"
• M.O.D. 0,3 m
• C-mount

• Kowa lens
• 16 mm
• F 1,4-16
• format 1"
• M.O.D. 0,3 m
• C-mount

• Kowa lens
• 25 mm
• F 1,4-16
• format 1"
• M.O.D. 0,3 m
• C-mount

• Kowa lens
• 35 mm
• F 1,4-16
• format 1"
• M.O.D. 0,3 m
• C-mount

• Kowa lens
• 50 mm
• F 1,4-16
• format 1"
• M.O.D. 0,5 m
• C-mount

• Kowa lens
• 12,5 mm
• F 1,4-16
• format 1"
• locating screw for aperture and focus
• via RS485 interface
• M.O.D. 0,9 m
• C-mount

• Kowa lens
• 25 mm
• F 1,4-16
• format 1"
• M.O.D. 0,3 m
• SWIR optimized
• C-mount

• Kowa lens
• 35 mm
• F 1,4-16
• format 1"
• M.O.D. 0,4 m
• SWIR optimized
• C-mount

• Kowa lens
• 50mm
• F1,4-16
• format 1"
• M.O.D. 0,6 m
• SWIR optimized
• C-mount

• M12, male, X-coded, 8-poles; PUR, 500 cm, shielded; RJ45, male, X-coded, 8-poles
• Dragchain capable; suitable for robotics ± 180 °/m, CAT6A, 10GBit/s
• Head A: IP66K, IP67; Head B: IP20
• Cable: good resistance against flames, oils
• Halogen free

• M12, male, X-coded, 8-poles; PUR, 1000 cm, shielded; RJ45, male, X-coded, 8-poles
• Dragchain capable; suitable for robotics ± 180 °/m, CAT6A, 10GBit/s
• Head A: IP66K, IP67; Head B: IP20
• Cable: good resistance against flames, oils
• Halogen free

• M12, male, X-coded, 8-poles; PUR, 1500 cm, shielded; RJ45, male, X-coded, 8-poles
• Dragchain capable; suitable for robotics ± 180 °/m, CAT6A, 10GBit/s
• Head A: IP66K, IP67; Head B: IP20
• Cable: good resistance against flames, oils
• Halogen free

• M12, male, X-coded, 8-poles; PUR, 2000 cm, shielded; RJ45, male, X-coded, 8-poles
• Dragchain capable; suitable for robotics ± 180 °/m, CAT6A, 10GBit/s
• Head A: IP66K, IP67; Head B: IP20
• Cable: good resistance against flames, oils
• Halogen free

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock) to RJ45
• cable carrier compatible
• length 2,0 m

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock) to RJ45
• cable carrier compatible
• length 5,0 m

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock) to RJ45
• cable carrier compatible
• length 10,0 m

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock) to RJ45
• cable carrier compatible
• length 15,0 m

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock) to RJ45
• cable carrier compatible
• length 20,0 m

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock), 90° angled to RJ45
• cable carrier compatible
• suitable for robotic apllications (+/- 180°/0,5m, min. 1.000.000 torsion cycles)
• length 2,0 m

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock), 90° angled to RJ45
• cable carrier compatible
• suitable for robotic applications (+/- 180°/ 0.5 m, min. 1.000.000 torsion cycles)
• length 5,0 m

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock), 90° angled to RJ45
• cable carrier compatible
• suitable for robotic applications (+/- 180°/ 0.5 m, min. 1.000.000 torsion cycles)
• length 10,0 m

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock), 90° angled to RJ45
• cable carrier compatible
• suitable for robotic applications (+/- 180°/ 0.5 m, min. 1.000.000 torsion cycles)
• length 20,0 m

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock), 90° angled to RJ45
• cable carrier compatible
• suitable for robotic applications (+/- 180°/ 0.5 m, min. 1.000.000 torsion cycles)
• length 30,0 m

• Gigabit Ethernet interface cable
• CAT6A
• M12/8-pin connector, X-coded (screw lock) to RJ45
• cable carrier compatible
• length 30,0 m

• shielded adapter connection cable
• M12/12-pin male connector to confectioned DC connector
• length 2,0 m
• manufactured cable: 11201118 ESG 34JP0200GS

• shielded process interface cable
• M12/12-pin female connector to open wires
• cable carrier compatible
• suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
• length 2,0 m

• shielded process interface cable
• M12/12-pin female connector to open wires
• cable carrier compatible
• suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
• length 5,0 m

• shielded process interface cable
• M12/12-pin female connector to open wires
• cable carrier compatible
• suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
• length 10,0 m

• shielded process interface cable
• M12/12-pin female connector to open wires
• cable carrier compatible
• suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
• length 20,0 m

• shielded process interface cable
• 90° angled M12/12-pin female connector to open wires
• cable carrier compatible
• suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
• length 2,0 m

• shielded process interface cable
• 90° angled M12/12-pin female connector to open wires
• cable carrier compatible
• suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
• length 5,0 m

• shielded process interface cable
• 90° angled M12/12-pin female connector to open wires
• cable carrier compatible
• suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
• length 10,0 m

• shielded process interface cable
• 90° angled M12/12-pin female connector to open wires
• cable carrier compatible
• suitable for robotic applications (+/- 180°/m, min. 500.000 torsion cycles)
• length 20,0 m

• mounting adapter for illuminations Rondo LX and HELIOS-130 to VCXG.I cameras
• enables use of M62 tube system

• Polarization filter for Falcon illumination FLDR-i90B

• Mounting adapter for polarization filter for Falcon FLDR-i90B illuminations: ZVI-Polarizer_FLDR-i90B (11167410)
• incl. screws

• Diffusor with drilling holes and screws for Falcon illumination FLDR-i90B

• Split cable M12/12-pin female connector to 1x M8/3-pin male connector for power the camera, 1x M8/4-pin male connector to power the I/Os and illuminations and 4x M8/4-pin female connectors for four illuminations
• Separate powering of camera and illumination. Double version of Output 1.
• Protection class IP65/IP67
• Length 40 cm (M12/12-pin cable 20 cm, M8 cables 20 cm)

• Split cable M12/12-pin female connector to 1x M8/3-pin male connector (to power the camera and I/Os, enable hardware trigger via input) and 1x M8/3-pin female connector for one illumination
• The I/O voltage is directly distributed to the illuminations.
• Protection class IP65/IP67
• length 100 cm (M12/12-pin cable 80 cm, M8 cables 20 cm)

• Split cable M12/12-pin female connector to 1x M8/3-pin male connector (to power the camera and I/Os, enable hardware trigger via input) and 2x M8/3-pin female connectors for two illuminations
• The I/O voltage is directly distributed to the illuminations.
• Protection class IP65/IP67
• Length 100 cm (M12/12-pin cable 80 cm, M8 cables 20 cm)

• Split cable M12/12-pin female connector to 1x M8/3-pin male connector (to power the camera and I/Os, enable hardware trigger via input) and 4x M8/3-pin female connectors for four illuminations
• The I/O voltage is directly distributed to the illuminations.
• Protection class IP65/IP67
• Length 100 cm (M12/12-pin cable 20 cm, M8 cables 80 cm)

• Split cable M12/12-pin female connector to 1x M8/3-pin male connector (to power the camera, I/Os and illuminations; enable hardware trigger via input) and 4x M8/3-pin female connectors for four illuminations
• The I/O voltage is distributed to the illuminations through the camera as a normal trigger signal using the cameras power output.
• Protection class IP65/IP67
• Length: 40 cm (M12/12-pin cable 20 cm, M8 cables 20 cm)

• Split cable M12/12-pin female connector to 1x M8/3-pin male connector (to power the camera and I/Os, enable hardware trigger via input) and 1x M8/3-pin female connector for one illumination
• The I/O voltage is directly distributed to the illuminations.
• Protection class IP65/IP67
• length 100 cm (M12/12-pin cable 80 cm, M8 cables 20 cm)

• Split cable M12/12-pin female connector to 1x M8/3-pin male connector (to power the camera and I/Os, enable hardware trigger via input) and 2x M8/4-pin female connectors for two illuminations
• The I/O voltage is directly distributed to the illuminations.
• Protection class IP65/IP67
• Length 100 cm (M12/12-pin cable 80 cm, M8 cables 20 cm)

• Split cable M12/12-pin female connector to 1x M8/3-pin male connector (to power the camera and I/Os, enable hardware trigger via input) and 4x M8/3-pin female connectors for four illuminations
• The I/O voltage is directly distributed to the illuminations.
• Protection class IP65/IP67
• Length 100 cm (M12/12-pin cable 20 cm, M8 cables 80 cm)

• flashable LED dark field illumination
• white
• diffuse
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 0,3 m
• diameter: 100 mm

• flashable LED bar light
• white
• diffuse
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 1 m
• dimensions: 158 mm × 17 mm × 20 mm housing

• flashable LED back light
• white
• diffuse
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 1 m
• dimensions: 116 mm × 228 mm × 23,5 mm housing

• flashable LED back light
• white
• diffuse
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 1 m
• dimensions: 47 mm × 47 mm × 15 mm housing

• flashable LED back light
• white
• diffuse
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 1 m
• dimensions: 95 mm × 95 mm × 15 mm housing

• flashable LED dome light
• white
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 0,3 m
• diameter: 130 mm

• flashable LED ring light
• IR 875 nm
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 0,3 m
• diameter: 94 mm

• flashable LED ring light
• red (626 nm)
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 0,3 m
• diameter: 94 mm

• flashable LED ring light
• white
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 0,3 m
• diameter: 94 mm

• flashable LED back light
• NIR
• diffuse
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 1 m
• dimensions: 94 mm × 94 mm × 10 mm housing

• flashable LED bar light
• white
• diffuse
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• cable length: 0,3 m
• dimensions: 18 mm × 95 mm × 20 mm housing

• LED spot light
• blue
• 19… 30 V
• cable length: 0,15 m
• diameter: 34 mm
• adjustable glass optics for spot or broad light
• integrated flash controller and potentiometer (brightness and exposure time)
• direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008))
• maximum exposure time 220 µs (maximum frequency 35 Hz)

• LED spot light
• infrared
• 19… 30 V
• cable length: 0,15 m
• diameter: 34 mm
• adjustable glass optics for spot or broad light
• integrated flash controller and potentiometer (brightness and exposure time)
• direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-Adapter cable illumination (11175008))
• maximum exposure time 220 µs (maximum frequency 35 Hz)

• LED spot light
• red
• 19… 30 V
• cable length: 0,15 m
• diameter: 34 mm
• adjustable glass optics for spot or broad light
• integrated flash controller and potentiometer (brightness and exposure time)
• direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable (11175008))
• maximum exposure time 220 µs (maximum frequency 35 Hz)

• LED spot light
• white
• 19… 30 V
• cable length: 0,15 m
• diameter: 34 mm
• adjustable glass optics for spot or broad light
• integrated flash controller and potentiometer (brightness and exposure time)
• direct connection to M12/12-pin connector thanks to T-adapter cable (ZVI-LUMIMAX T1-adapter cable illumination (11175008))
• maximum exposure time 220 µs (maximum frequency 35 Hz)

• flashable LED dark field illumination
• white
• radiation angle 120°
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• diameter: 120 mm

• flashable LED back light
• white
• diffuse
• radiation angle 120°
• diameter: 94 mm
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• dimensions: 127 mm × 127 mm × 20 mm housing

• flashable LED back light
• white
• diffuse
• radiation angle 80°
• diameter: 94 mm
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector
• dimensions: 87 mm × 87 mm × 20 mm housing

• flashable LED bar light
• red (617 nm)
• radiation angle 30°
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• dimensions: 74 mm × 15 mm × 17 mm housing

• flashable LED ring light
• white
• radiation angle 80°
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• diameter: 134 mm
• IP65 protection

• flashable LED ring light
• infrared (850 nm)
• radiation angle 120°
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• diameter: 101 mm

• flashable LED ring light
• infrared (850 nm)
• radiation angle 50°
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• diameter: 101 mm

• flashable LED ring light
• white
• radiation angle 120°
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• diameter: 101 mm

• flashable LED incident light
• red (617 nm)
• radiation angle 30°
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• dimensions: 87 mm × 87 mm × 20 mm housing

• flashable LED bar light
• red (617 nm)
• radiation angle 30°
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• dimensions: 78 mm × 25 mm × 23 mm housing

• flashable LED bar light
• SH white
• radiation angle 120°
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• dimensions: 78 mm × 25 mm × 23 mm housing

• flashable LED bar light
• white
• radiation angle 120°
• 24 V
• voltage-driven (equipped with integrated pre-resistor)
• M8/4-pin connector (cable has to be ordered separately)
• dimensions: 78 mm × 25 mm × 23 mm housing