Canada
ca
Français
Caractéristiques techniques
- Head A: Connection
- M12
- Head A: Angle cable outlet
- 0°
- Head A: Gender
- Male
- Head A: Coding
- L
- Head A: No. of poles
- 5
- Head A: LED
- No
- Head A: Width across flats
- AF17
- Head A: Tightening torque
- 0,6 Nm
- Head A: Knurled nut material
- Zinc-pressure die casting, surface Ni
- Head A: Body color
- Black
- Labeling sleeve side A
- Yes
- Head B: Connection
- M12
- Head B: Angle cable outlet
- 0°
- Head B: Gender
- Female
- Head B: Coding
- L
- Head B: No. of poles
- 5
- Head B: LED
- No
- Head B: Width across flats
- AF17
- Head B: Tightening torque
- 0,6 Nm
- Head B: Knurled nut material
- Zinc-pressure die casting, surface Ni
- Head B: Body color
- Black
- Head B: Gasket material
- FKM
- Labeling sleeve side B
- Yes
- Cable length
- 100 cm
- Length tolerance
- + 5 cm
- Shielded
- No
- Conductor structure
- 84 × 0,15 mm
- AWG
- 16
- External sheath: Material
- PUR
- External sheath: Color
- Black
- Cable diameter
- 8,7 mm ± 5%
- Wire cross section
- 1.5 mm²
Cable
- Cable: Temperature range (mobile)
- - 20 ...+ 80 °C
- Cable: Temperature range (fixed)
- - 50 ...+ 80 °C
- Operating voltage (only UL listed)
- 30 V AC/DC
- Shielded
- No
- Bending radius (fixed)
- 65,25 mm
- Number of wires
- 5
- Number and diameter of wires
- 5x1,5
- Length tolerance
- + 5 cm
- Cable length
- 100 cm
- Acceleration (C-track)
- max. 5 m/s²
- AWG
- 16
- Bending radius (fixed)
- min. 7,5 × outer diameter
- Torsion speed
- max. 35 cycles/min
- Bending radius (mobile)
- min. 10 × outer diameter
- Cable type
- 3
- Cable weight
- approx. 129,8 g/m
- Conductor structure
- 84 × 0,15 mm
- Cable diameter
- 8,7 mm ± 5%
- Conductor: Material
- Copper, bare
- External sheath: Material
- PUR
- Insulation: Material
- PP
- No. of bending cycles (C-track)
- approx. 5000000 Cycles
- Nominal voltage
- 1000 V AC
- No. of torsion cycles
- approx. 2000000 Cycles
- Paired stranding
- No
- Single wire diameter
- 0,15 mm
- Cable: Test voltage
- 10 kV
- Torsion stress in °
- ± 180 °/m
- Total stranding
- 5 wires strand around core-filler
- Travel speed (C-track)
- max. 3,3 m/s
- Traversing path (horizontal)
- max. 5 m
- Wire cross section
- 1.5 mm²
- Wire processing
- No
- Wire diameter incl. isolation
- 2,3 mm ± 5%
- External sheath: Color
- Black
Données électriques
- Operating voltage
- max. 63 V DC
- Operating voltage (only UL listed)
- 30 V AC/DC
- Nominal voltage
- 1000 V AC
- Contact resistance
- max. 30 mOhm
- Operating current per contact
- max. 12 A
Données mécaniques
- Head A: Degree of protection
- IP65, IP67
- Head B: Degree of protection
- IP65, IP67
- Bending radius (mobile)
- min. 10 × outer diameter
- Bending radius (fixed)
- min. 7,5 × outer diameter
- No. of bending cycles (C-track)
- approx. 5000000 Cycles
- Torsion speed
- max. 35 cycles/min
- Torsion stress in °
- ± 180 °/m
- No. of torsion cycles
- approx. 2000000 Cycles
- Acceleration (C-track)
- max. 5 m/s²
- Travel speed (C-track)
- max. 3,3 m/s
Conditions ambiantes
- Temperature range (mobile)
- - 20 ...+ 80 °C
- Temperature range (fixed)
- - 25 ...+ 85 °C
- Cable: Temperature range (fixed)
- - 50 ...+ 80 °C
- Dragchain capable
- Oui
- Head A: Chemical resistance
- No
- Head A: Flame resistance
- V-2 (UL 94)
- Head A: Acid and alkali resistant
- No
- Head A: Pollution degree
- 3
- Head B: Chemical resistance
- No
- Head B: Flame restistance
- V-2 (UL 94)
- Head B: Acid and alkali resistant
- No
- Head B: Pollution degree
- 3
- Cable: Chemical resistance
- Good (DIN EN 60811-404)
- Cable: Flame resistance
- Conform UL 1581 VW-1, CSA FT1, IEC 60332-1, IEC 60332-2-2
- Cable: Oil resistance
- Good (DIN EN 60811-404)
- Cable: Silicone-free
- Oui
- Eclass
- 27060311
Modèle 3D
Modèle 3D
La création de modèles CAD nécessite une connexion externe à CADENAS.
Téléchargements
Fiche technique
-
Fiche technique – CAM12.L5-11233110
-
Fiche technique – CAM12.L5-11233110
-
Fiche technique – CAM12.L5-11233110
Certifications / Approbations
EPLAN
-
Lien vers le Data Portal
