optoTurn EN580E.ML-SU06.GB11G.13120.H

Artigo nº: 11246023

Absolute encoder multiturn
Optical sensing method
Resolution: singleturn 13 bit, multiturn 12 bit
Synchro flange
Maximum resistant against magnetic fields
High connection flexibility thanks to flexible M12 and flylead connector
M23

Dados técnicos

mostrar tudo

Dados técnicos - Classificações eléctricas

Voltage supply

8...30 VDC

Reverse polarity protection

Short-circuit proof

Consumption w/o load

≤80 mA (24 VDC)

Interface

Function

Multiturn

Steps per revolution

8192 / 13 bit

Number of revolutions

4096 / 12 bit

Absolute accuracy

±0,03 °

Sensing method

Optical

Code

Gray

Code sequence

CW: ascending values with clockwise sense of rotation (looking at flange)

Input signals

SSI clock
Zero setting input
Counting direction

Output stages

SSI data: Linedriver RS422

Output signals

SSI data

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-4

Approval

UL-Listing: E217823

Dados técnicos - projeto mecânico

Size (flange)

ø58 mm

Shaft type

ø6 x 10 mm, solid shaft with flat

Flange

Synchro flange

Protection EN 60529

IP 54 (flange side)
IP 65 (housing side)

Operating speed

≤6000 rpm (+25 °C)

Starting torque

≤0,02 Nm

Admitted shaft load

≤40 N axial
≤80 N radial

Material

Housing: aluminium
Shaft: stainless steel

Operating temperature

-25...+85 °C (see general information)

Relative humidity

95 % non-condensing

Resistance

EN 60068-2-6
Vibration ±4 mm - 10-61 Hz, 30 g - 61-2000 Hz
EN 60068-2-27
Shock 100 g, 6 ms

Weight approx.

400 g

Connection

Flange connector M23, 12-pin, CCW

Transferências

mostrar tudo

Data sheet

Data sheet – EN580E.ML-SU06.GB11G.13120.H
- FR (pdf | 958 KB)
Data sheet – EN580E.ML-SU06.GB11G.13120.H
- DE (pdf | 967 KB)
Data sheet – EN580E.ML-SU06.GB11G.13120.H
- EN (pdf | 979 KB)

Quickstart

EN580E.ML
- DE/EN/FR (pdf | 2 MB)

Certificates / approvals

UL-Listing: E217823
- (pdf | 263 KB)

CAD

EN580E.ML - solid shaft with synchro flange, flange connector M23
- (zip | 386 KB)

EPLAN

Link para o portal de dados
- Link para o portal de dados

Acessórios

mostrar tudo

Mounting accessories

	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Artigo nº: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Artigo nº: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=06 / D2=06) For encoder with solid shaft Artigo nº: 11065916	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Artigo nº: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft Artigo nº: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=06 / D2=06) For encoder with solid shaft Artigo nº: 11069333	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Artigo nº: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Set of eccentric fixings type A Artigo nº: 11065545	With 3 eccentric fixings type A
	Mounting adaptor For encoders with synchro flange Artigo nº: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Artigo nº: 10117668	With 3x eccentric fixings, screws and nuts

Cabos com extremidades livres

	Female connector M23, 12-pin, CW, with cable 1 m Artigo nº: 11095302	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 1 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 2 m Artigo nº: 11100408	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 2 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 5 m Artigo nº: 11100430	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 5 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 10 m Artigo nº: 11100431	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 10 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)

Measuring wheels

	MR241.06D Small measuring wheel Artigo nº: 11033278	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø6 mm
	MR261.06A Small measuring wheel Artigo nº: 11033288	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø6 mm

Para o topo

Codificadores absolutos

optoTurn EN580E.ML-SU06.GB11G.13120.H

Solid shaft with synchro flange, optical multiturn encoders 13 bit ST / 12 bit MT, SSI

Dados técnicos

Dados técnicos - Classificações eléctricas

Dados técnicos - projeto mecânico

Transferências

Data sheet

Quickstart

Certificates / approvals

CAD

EPLAN

Acessórios

Mounting accessories

Cabos com extremidades livres

Measuring wheels