optoPulse EN580E.IL-SU - TTL/HTL | Codificadores incrementais

Size ø58 mm
Precise optical sensing
Output signal level TTL or HTL
Pulses per revolution up to 4096
High connection flexibility due to flexible M12 connector and flylead connector M23

Dados técnicos

mostrar tudo

Dados técnicos - Classificações eléctricas

Voltage supply

5 VDC ±5 %
8...30 VDC

Reverse polarity protection

Short-circuit proof

Yes (HTL)
Yes (TTL, max. 1 s and 1 signal)

Consumption w/o load

≤70 mA

Pulses per revolution

1024
2048
4096

Phase shift

90 ° ±10°

Duty cycle

40…60 %

Reference signal

Zero pulse, width 90° ±10 %

Sensing method

Optical

Output frequency

≤300 kHz (TTL)
≤160 kHz (HTL)

Output signals

A+, B+, R+, A-, B-, R-

Output stages

TTL/RS422
HTL/push-pull

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-4

Approval

UL-Listing: E217823

Dados técnicos - projeto mecânico

Size (flange)

ø58 mm

Shaft type

ø6 x 10 mm, solid shaft with flat

Admitted shaft load

≤40 N axial
≤80 N radial

Flange

Synchro flange

Protection EN 60529

IP 54 (flange side)
IP 65 (housing side)

Operating speed

≤6000 rpm (+25 °C)

Starting torque

≤0,02 Nm

Material

Housing: aluminium
Solid shaft: stainless steel

Operating temperature

-25...+100 °C (see general information)
Max. temperature at the cable: +85 °C

Relative humidity

95 % non-condensing

Resistance

EN 60068-2-6 Vibration 30 g, 10-2000 Hz
EN 60068-2-27 Shock 100 g, 11 ms

Connection

Connector M12, 8-pin, flexible
Flange connector M23, 12-pin (with sense)
Flylead connector M23, 12-pin, tangential, length 300 mm (with sense)

Weight approx.

300 g

Transferências

mostrar tudo

Data sheet

Data sheet – EN580E.IL-SU - TTL/HTL
- FR (pdf | 2 MB)
Data sheet – EN580E.IL-SU - TTL/HTL
- EN (pdf | 2 MB)
Data sheet – EN580E.IL-SU - TTL/HTL
- DE (pdf | 2 MB)

Certificates / approvals

UL-Listing: E217823
- (pdf | 263 KB)

Acessórios

mostrar tudo

Mounting accessories

	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Artigo nº: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Artigo nº: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=06 / D2=06) For encoder with solid shaft Artigo nº: 11065916	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Artigo nº: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=6 / D2=6) For encoder with solid shaft Artigo nº: 10141131	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=06 / D2=06) For encoder with solid shaft Artigo nº: 11069333	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Artigo nº: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Set of eccentric fixings type A Artigo nº: 11065545	With 3 eccentric fixings type A
	Mounting adaptor For encoders with synchro flange Artigo nº: 10117667	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount
	Set of eccentric fixings for mounting clamp (10117667) Artigo nº: 10117668	With 3x eccentric fixings, screws and nuts

Connectors and cables

	Connection cable 5 m shielded with female connector M12, 8-pin, straight (ESG 34FH0500G) Artigo nº: 10129332	Connection cable shielded with female connector M12, shielding on cap nut Cable length 5 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 10 m shielded with female connector M12, 8-pin, straight (ESG 34FH1000G) Artigo nº: 10129333	Connection cable shielded with female connector M12, shielding on cap nut Cable length 10 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 2 m shielded with female connector M12, 8-pin, angled (ESW 33FH0200G) Artigo nº: 11053961	Connection cable shielded with female connector M12, shielding on cap nut Cable length 2 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 5 m shielded with female connector M12, 8-pin, angled (ESW 33FH0500G) Artigo nº: 11053962	Connection cable shielded with female connector M12, shielding on cap nut Cable length 5 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Connection cable 10 m shielded with female connector M12, 8-pin, angled (ESW 33FH1000G) Artigo nº: 10170054	Connection cable shielded with female connector M12, shielding on cap nut Cable length 10 m 8-pin version Cable coating PUR Halogen-free Suitable for flexible cable carriers UL listed, number E315836
	Female connector M23, 12-pin, CW Artigo nº: 10164705	Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). EMC version Temperature range -40...+100 °C
	Female connector M23, 12-pin, CW, with cable 1 m Artigo nº: 11095302	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 1 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 2 m Artigo nº: 11100408	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 2 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 5 m Artigo nº: 11100430	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 5 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)
	Female connector M23, 12-pin, CW, with cable 10 m Artigo nº: 11100431	Connection cable shielded with female connector M23, open cable end Cable [4x2x0.14 mm²], cable length 10 m Cable coating PVC Colour code according to DIN 47100 UL/CSA approval Connector M23: 12-pin, female, clockwise (CW). Suitable for cable connection to flange connector M23 (12-pin, male, counter-clockwise (CCW)). Temperature range -40...+85 °C (fixed installation)

Para o topo

Codificadores incrementais

optoPulse EN580E.IL-SU - TTL/HTL

Solid shaft with synchro flange

Dados técnicos

Dados técnicos - Classificações eléctricas

Dados técnicos - projeto mecânico

Transferências

Data sheet

Certificates / approvals

Acessórios

Mounting accessories

Connectors and cables