Brazil
br
Português
Dados técnicos
Dados técnicos - Classificações eléctricas
- Voltage supply
- 10...30 VDC
- Consumption typ.
- 25 mA (24 VDC, w/o load)
- Initializing time typ.
- 500 ms after power on
- Interface
- CANopen®
- Function
- Linear position feedback
- Profile conformity
- CANopen® CiA DS 301, DS 406, DS 410
- Measuring range
- Up to 8 m (linear position)
- 360° (inclination angle)
- Resolution
- 0,1 mm (linear position)
- 0,1 ° (inclination angle)
- Temperature coefficient
- 0,02 °/K (inclination angle)
- Linearity
- ±0.3 % FS (linear position)
- ±0.5 % FS (inclination angle)
- Absolute accuracy
- ±0,3 % FS (linear position)
- ±0,5 % FS (inclination angle)
- ±0,2 ° (+25 °C / inclination angle)
- Sensing method
- Potentiometer
- Code sequence
- Programmable
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
- Programmable parameters
- Operating modes
- Rotating direction
- Scaling
- Zero position
Dados técnicos - projeto mecânico
- Protection EN 60529
- IP 65 (housing, drainage holes closed)
- IP 54 (cable inlet)
- Material
- Cable: stainless steel cable AISI 316 coated with nylon PA12
- Housing: plastic
- Operating temperature
- -40...+85 °C
- Measuring length
- 8 m
- Cable diameter
- 0,7 mm
- Cable fastening
- Eyelet Height: 5 mm Internal diameter: 5 mm Outer diameter: 10 mm
- Pull-in force
- >2,5 N (pull-in force reduced at low temperatures)
- Pull-out force
- ≤8 N
- Relative humidity
- 95 % non-condensing
- Resistance
- EN 60068-2-6
- Vibration 10 g, 10-2000 Hz
- EN 60068-2-27
- Shock 50 g, 11 ms
- Weight approx.
- 775 g
- Connection
- Cable 2 m, radial
- Flange connector M12, 5-pin
- Instruction
- Please consider the assembly instructions
Software
Software
-
GCA8, GCA12 describing files
Transferências
Data sheet
-
Data sheet – GCA8 - CANopen®
-
Data sheet – GCA8 - CANopen®
-
Data sheet – GCA8 - CANopen®
-
Data sheet – GCA8 - CANopen®
Quickstart
Software Manual
-
GCA - CANopen®
Declaration of conformity
CAD
-
GCA8 with flange connector M12 / STEP
-
GCA8 with cable / STEP
