Brazil
br
Português
Dados técnicos
Dados técnicos - Classificações eléctricas
- Voltage supply
- 8...36 VDC
- Reverse polarity protection
- Yes
- Short-circuit proof
- Yes
- Consumption typ.
- 30 mA (24 VDC, w/o load)
- 60 mA (24 VDC, w/o load, redundant)
- Initializing time typ.
- ≤ 500 ms after power on
- Interface
- SAE J1939
- Function
- Linear position feedback
- Measuring range
- Up to 4.7 m (linear position)
- 0...360° (inclination sensor)
- Resolution
- 0,1 mm (linear position)
- 0,1 ° (inclination angle)
- Temperature coefficient
- 0,04 °/K (inclination angle)
- Linearity typ.
- ±0.5 % FS (measuring length 2.3 m)
- ±0.3 % FS (measuring length 4.7 m)
- ±0.2° (inclination angle)
- Absolute accuracy typ.
- ±0,6 % FS (+25 °C / measuring length 2.3 m)
- ±1 % FS (-40...+85 °C / measuring length 2.3 m)
- ±0,5 % FS (+25 °C / measuring length 4.7 m)
- ±0,9 % FS (-40...+85 °C / measuring length 4.7 m)
- ±0,4 ° (+25 °C / inclination angle)
- Sensing method
- Magnetic
- Code
- Programmable
- Load dump protection
- ISO 7637-2
- Test Level 4, 12 V/24 V systems
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
- Programmable parameters
- Operating modes
- Rotating direction
- Scaling
- Zero position
Dados técnicos - projeto mecânico
- Protection EN 60529
- IP 67 (housing, drainage holes closed)
- IP 54 (cable inlet)
- Material
- Cable: stainless steel cable AISI 316 coated with nylon PA12
- Housing: plastic
- Operating temperature
- -40...+85 °C
- Service life
- Typ. 500 000 strokes
- (depends on the type of shaft load)
- Measuring length
- 2,3 m
- 4,7 m
- Cable acceleration
- ≤10 m/s²
- Cable speed
- ≤1 m/s
- Cable diameter
- 0,7 mm
- Cable fastening
- Eyelet
- Height: 5 mm
- Internal diameter: 8 mm
- Outer diameter: 15 mm
- Pull-in force
- >1,5 N (+25 °C, pull-in force reduced at low temperatures)
- Pull-out force
- ≤8 N (+25 °C)
- Relative humidity
- 95 % non-condensing
- Resistance
- EN 60068-2-6
- Vibration 20 g, 58-2000 Hz
- EN 60068-2-27
- Shock 50 g, 11 ms
- Weight approx.
- 440 g
- Connection
- Flange connector M12, 5-pin
- Cable 2 m, radial
- Instruction
- Please consider the assembly instructions
Software
Software
-
GCAxx - SAE J1939 - DBC
Transferências
Data sheet
-
Data sheet – GCA3-PM - SAE J1939 up to 4.7 m
-
Data sheet – GCA3-PM - SAE J1939 up to 4.7 m
-
Data sheet – GCA3-PM - SAE J1939 up to 4.7 m
Quickstart
-
GCA3-PM
Software Manual
-
GCA3, GCA5, GCA8, GCA12 - SAE J1939
Declaration of conformity
CAD
-
GCA3-PM with cable / STEP
-
GCA3-PM with flange connector M12 / STEP
-
GCA3-PM with flange connector M12 / IGES
-
GCA3-PM with cable / PARASOLIDS
-
GCA3-PM with cable / IGES
-
GCA3-PM with flange connector M12 / PARASOLIDS