HS35S - Sine | Codificadores senoidais

Rugged design up to IP 67 protection
Shock resistant up to 200 g's
Insulating insert to prevent high shaft currents from damaging bearings
Wide range voltage supply 4.75...30 VDC
Precision ≤60 arc-seconds for perfect process control
Patented LowHarmonics® technology
Outstanding signal quality for superior speed control

Dados técnicos

mostrar tudo

Dados técnicos - Classificações eléctricas

Voltage supply

4.75...30 VDC

Reverse polarity protection

Consumption w/o load

≤90 mA

Sinewave cycles per revolution

1024 … 5000

Accuracy

≤60 arc-seconds

Sensing method

Optical

Output frequency

≤180 kHz (-3 dB)

Output signals

A+, A-, B+, B-, Z+, Z-

Output stages

SinCos 1 Vpp

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-3

Approval

UL approval / E240061
RoHS compliant EU guideline 2011/65/EC
CE

Dados técnicos - projeto mecânico

Size (flange)

ø3.15" (ø80 mm)

Shaft type

ø0.375...1" (ø9.525...25.4 mm) (through hollow shaft isolated)

Bore runout

0.0016" (0.04 mm) TIR max.

Admitted misalignment

0.004" (0.1016 mm) radial TIR (end of shaft)
0.01" (0.254 mm) axial

Protection EN 60529

IP 54
IP 65
IP 67

Operating speed

≤5000 rpm (see temperature diagram)

Bearing

52100 SAE high carbon steel (ABEC 5)

Starting torque

≤3 in-oz (77 °F, IP 65)
≤0,02 Nm (+25 °C, IP 65)

Rotor moment of inertia

2,3 oz-in² (420 gcm²)

Service life

Bearing: typ. 13 billion rev. (89000 h/2500 rpm)

Material

Housing: aluminium, powder-coated
Shaft: stainless steel

Operating temperature

-40...+212 °F (-40...+100 °C), (fixed cable): see temperature diagram

Relative humidity

98 % non-condensing

Resistance

EN 60068-2-6 Vibration 20 g, 60-2000 Hz
EN 60068-2-27 Shock 200 g, 6 ms

Connection

MIL-connector, 10-pin
Cable (AWG26 wire)

Weight approx.

23 oz.
660 g

Transferências

mostrar tudo

Data sheet

Data sheet – HS35S - Sine
- DE (pdf | 3 MB)
Data sheet – HS35S - Sine
- EN (pdf | 3 MB)
Data sheet – HS35S - Sine
- FR (pdf | 3 MB)

Quickstart

HS35
- DE/EN (pdf | 5 MB)
Protective cage HS35
- DE (pdf | 236 KB)
Protective cage HS35
- EN (pdf | 236 KB)

Certificates / approvals

UL certificate E240061
- EN (pdf | 167 KB)

Declaration of conformity

DoC / CoC - HS35S
- BG/CZ/DE/DK/EN/ES/FI/FR/GR/HU/KO/LT/LV/NL/NO/PL/PT/RO/SI/SK (pdf | 488 KB)

CAD

Tether T1 - 3D drawing / PDF
- Download (pdf | 266 KB)
Tether T1 - 3D drawing / STEP
- STEP (zip | 52 KB)
Tether T3 - 3D drawing / PDF
- Download (pdf | 255 KB)
Tether T3 - 3D drawing / STEP
- STEP (zip | 51 KB)
Tether T4 - 3D drawing / PDF
- Download (pdf | 254 KB)
Tether T4 - 3D drawing / STEP
- STEP (zip | 51 KB)
Tether T5 - 3D drawing / PDF
- Download (pdf | 254 KB)
Tether T5 - 3D drawing / STEP
- STEP (zip | 52 KB)
HS35 3D drawing cable, ø25.4 mm, IP54/IP65 / PDF
- (pdf | 418 KB)
HS35 3D drawing cable, ø25.4 mm, IP54/IP65 / STEP
- (zip | 878 KB)
HS35 3D drawing cable, ø25.4 mm, IP67 / PDF
- (pdf | 456 KB)
HS35 3D drawing cable, ø25.4 mm, IP67 / STEP
- (zip | 949 KB)
HS35 3D drawing connector 7-pin, ø25.4 mm, IP54/IP65 / PDF
- (pdf | 487 KB)
HS35 3D drawing connector 7-pin, ø25.4 mm, IP54/IP65 / STEP
- (zip | 791 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / PDF
- (pdf | 614 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / STEP
- (zip | 755 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP54/IP65 / PDF
- (pdf | 577 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP54/IP65 / STEP
- (zip | 683 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / PDF
- (pdf | 614 KB)
HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / STEP
- (zip | 755 KB)
Reducer insert HS35 ø0.375” (ø9.525 mm) - 3D drawing / STEP
- (zip | 21 KB)
Reducer insert HS35 ø0.50” (ø12.7 mm) - 3D drawing / STEP
- (zip | 21 KB)
Reducer insert HS35 ø0.625” (ø15.875 mm) - 3D drawing / STEP
- (zip | 24 KB)
Reducer insert HS35 ø0.75” (ø19.05 mm) - 3D drawing / STEP
- (zip | 22 KB)
Reducer insert HS35 ø0.87” (ø22.225 mm) - 3D drawing / STEP
- (zip | 17 KB)
Reducer insert HS35 ø10 mm - 3D drawing / STEP
- (zip | 22 KB)
Reducer insert HS35 ø12 mm - 3D drawing / STEP
- (zip | 22 KB)
Reducer insert HS35 ø14 mm - 3D drawing / STEP
- (zip | 24 KB)
Reducer insert HS35 ø15 mm - 3D drawing / STEP
- (zip | 22 KB)
Reducer insert HS35 ø16 mm - 3D drawing / STEP
- (zip | 22 KB)
Reducer insert HS35 ø18 mm - 3D drawing / STEP
- (zip | 21 KB)
Reducer insert HS35 ø20 mm - 3D drawing / STEP
- (zip | 21 KB)
Protective cover HS35 - 3D drawing / STEP
- STEP (zip | 3 MB)

Acessórios

mostrar tudo

Mounting accessories

	Torque arm T1 Artigo nº: 11076339	Fast and easy mounting on encoder. Prevents against bearing force overlaod. Fixed length, for bolt 3/8" with plastic clip and screws
	Torque arm T3 Artigo nº: 11075692	Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point. Adjustable length, for bolt 1/4" with plastic clip and screws
	Torque arm T4 Artigo nº: 11075690	Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point. Adjustable length, for bolt 5/16" with plastic clip and screws
	Torque arm T5 Artigo nº: 11071506	Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point. Adjustable length, for bolt 3/8" with plastic clip and screws
	Torque arm T6 Artigo nº: 11167978	Fast and easy mounting on encoder. Prevents against bearing force overlaod. Flexible orientation of fixing point. Adjustable length, kit for bolts 1/4", 5/16" and 3/8" with plastic clip and screws
	Reducer insert HS35 ø0.375" (ø9.525 mm) Artigo nº: 11084462	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø0.50" (ø12.7 mm) Artigo nº: 11078636	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø0.625" (ø15.875 mm) Artigo nº: 11080114	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø0.75" (ø19.05 mm) Artigo nº: 11078639	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø0.87" (ø22.225 mm) Artigo nº: 11078654	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø10 mm Artigo nº: 11087744	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø12 mm Artigo nº: 11087745	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø14 mm Artigo nº: 11087746	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø15 mm Artigo nº: 11148651	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø16 mm Artigo nº: 11087747	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø18 mm Artigo nº: 11087748	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Reducer insert HS35 ø20 mm Artigo nº: 11087750	Easy assembly by plugging in Exchange possible without tools Quick adjustment of the required diameter Suitable for high speeds
	Dust cap HS35 Artigo nº: 11075459	Fast and easy mounting on encoder backside. Prevents encoder bearing against dust, dirt and fluids. Sealing up to IP 67.
	Protective cage HS35 Artigo nº: 11080884	Protective cover; for NEMA 56C-face (4.5") and fan-cover. For attachment to a fan cover hammer head bolts are recommended (not included).

Connectors and cables

	NAC 29H 10-pin Mil Spec Mating Connector Artigo nº: 11126235	NAC 29H 10-pin Mil Spec Mating Connector (female)
	CNAC 29H 10-pin Mil Spec Mating Connector + cable L=10 ft (3.05 m) Artigo nº: 11078307	Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves Cable length 10 ft (3.05 m)
	CNAC 29H 10-pin Mil Spec Mating Connector + cable L=20 ft (6.10 m) Artigo nº: 11078427	Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves Cable length 20 ft (6.10 m)
	CNAC 29H 10-pin Mil Spec Mating Connector + cable L=30 ft (9.15 m) Artigo nº: 11078428	Shielded connection cable with mating connector NAC 29H 10-pin Mil Spec (female contacts) and stranded wires 0.14 mm² with wire end sleeves Cable length 30 ft (9.15 m)