optoPulse EN580E.IL-SC10.GA1T1.01024.K

Artigo nº: 11246018

Size ø58 mm
Precise optical sensing
Output signal level TTL or HTL
Pulses per revolution up to 4096
High connection flexibility thanks to flexible M12 and flylead connector M23

Dados técnicos

mostrar tudo

Dados técnicos - Classificações eléctricas

Voltage supply

5 VDC ±5 %

Reverse polarity protection

Short-circuit proof

Yes (max. 1 s and 1 signal)

Consumption w/o load

≤70 mA

Pulses per revolution

1024

Phase shift

90 ° ±10°

Duty cycle

40…60 %

Reference signal

Zero pulse, width 90° ±10 %

Sensing method

Optical

Output frequency

≤300 kHz (TTL)

Output signals

A+, B+, R+, A-, B-, R-

Output stages

TTL/RS422

Interference immunity

EN 61000-6-2

Emitted interference

EN 61000-6-4

Approval

UL-Listing: E217823

Dados técnicos - projeto mecânico

Size (flange)

ø58 mm

Shaft type

ø10 x 20 mm, solid shaft with flat

Admitted shaft load

≤40 N axial
≤80 N radial

Flange

Clamping flange

Protection EN 60529

IP 54 (flange side)
IP 65 (housing side)

Operating speed

≤6000 rpm (+25 °C)

Starting torque

≤0,02 Nm

Material

Housing: aluminium
Solid shaft: stainless steel

Operating temperature

-25...+100 °C (see general information)

Relative humidity

95 % non-condensing

Resistance

EN 60068-2-6 Vibration 30 g, 10-2000 Hz
EN 60068-2-27 Shock 100 g, 11 ms

Connection

Connector M12, 8-pin, flexible

Weight approx.

300 g

Transferências

mostrar tudo

Data sheet

Data sheet – EN580E.IL-SC10.GA1T1.01024.K
- FR (pdf | 1001 KB)
Data sheet – EN580E.IL-SC10.GA1T1.01024.K
- DE (pdf | 1002 KB)
Data sheet – EN580E.IL-SC10.GA1T1.01024.K
- EN (pdf | 999 KB)

Quickstart

EN580E.IL
- DE/EN/FR (pdf | 2 MB)

Certificates / approvals

UL-Listing: E217823
- (pdf | 263 KB)

CAD

EN580E.IL - solid shaft with clamping flange, connector M12
- (zip | 337 KB)

EPLAN

Link para o portal de dados
- Link para o portal de dados

Acessórios

mostrar tudo

Mounting accessories

	Double loops coupling (D1=10 / D2=10) For encoder with solid shaft Artigo nº: 11101781	Thermally and electrically isolated Absorbing shocks and vibration Excellent compensation of radial, lateral and angular misalignments Medium torsional stiffness Low restoring forces Maintenance-free
	Bellows coupling (D1=06 / D2=10) For encoder with solid shaft Artigo nº: 11050507	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Coupling CPS25 (L=19, D1=10 / D2=10) For encoder with solid shaft Artigo nº: 11065923	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS25 (L=19, D1=10 / D2=06) For encoder with solid shaft Artigo nº: 11065922	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Spring washer coupling (D1=6 / D2=10) For encoder with solid shaft Artigo nº: 10141132	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Spring washer coupling (D1=10 / D2=10) For encoder with solid shaft Artigo nº: 10141133	Backlash-free and angle-synchronous transmission of rotary movements Plug-in version Electric isolated Suitable for very high speeds Good compensation of all misalignments
	Coupling CPS37 (L=24, D1=10 / D2=06) For encoder with solid shaft Artigo nº: 11069337	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Coupling CPS37 (L=24, D1=10 / D2=10) For encoder with solid shaft Artigo nº: 11069340	Precision coupling Torsionally stiff coupling with low installation depth Pluggable Electrically insulating center disk Suitable for very high speeds
	Bellows coupling (D1=10 / D2=10) For encoder with solid shaft Artigo nº: 11053277	Backlash-free angle-synchronous transmission Optimum compensation of misalignments Very high torsional spring stiffness Small restoring force Vibration damping Stainless steel bellows
	Spring encoder arm Artigo nº: 11101893	Tether arm for Ø58 mm with clamping flange Optimal for use encoders with measuring wheel Virtually any contact pressure adjustable Versatile mounting options
	Mounting adaptor For encoders with clamping flange Artigo nº: 10125051	Glass-fiber reinforced plastic Excellent resistance against temperature and chemicals Electrically isolated encoder mount

Cabos com extremidades livres

	CAM12.A8-11232237 Artigo nº: 11232237	M12, female, A-coded, 8-poles; PUR, 200 cm, shielded, free cable end Dragchain capable Head A: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free
	CAM12.A8-11233244 Artigo nº: 11233244	M12, female, A-coded, 8-poles; PUR, 500 cm, shielded, free cable end Dragchain capable Head A: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free
	CAM12.A8-11233245 Artigo nº: 11233245	M12, female, A-coded, 8-poles; PUR, 1000 cm, shielded, free cable end Dragchain capable Head A: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free
	CAM12.A8-11233250 Artigo nº: 11233250	M12, female, A-coded, 8-poles; PUR, 200 cm, shielded, free cable end Dragchain capable Head A: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free
	CAM12.A8-11233252 Artigo nº: 11233252	M12, female, A-coded, 8-poles; PUR, 500 cm, shielded, free cable end Dragchain capable Head A: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free
	CAM12.A8-11233253 Artigo nº: 11233253	M12, female, A-coded, 8-poles; PUR, 1000 cm, shielded, free cable end Dragchain capable Head A: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free

Cabos de conexão

	CAM12.A8-11233258 Artigo nº: 11233258	M12, male, A-coded, 8-poles; PUR, 200 cm, shielded; M12, female, A-coded, 8-poles Dragchain capable Head A: IP65, IP66K, IP67; Head B: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free
	CAM12.A8-11233260 Artigo nº: 11233260	M12, male, A-coded, 8-poles; PUR, 500 cm, shielded; M12, female, A-coded, 8-poles Dragchain capable Head A: IP65, IP66K, IP67; Head B: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free
	CAM12.A8-11233261 Artigo nº: 11233261	M12, male, A-coded, 8-poles; PUR, 1000 cm, shielded; M12, female, A-coded, 8-poles Dragchain capable Head A: IP65, IP66K, IP67; Head B: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free
	CAM12.A8-11233266 Artigo nº: 11233266	M12, male, A-coded, 8-poles; PUR, 200 cm, shielded; M12, female, A-coded, 8-poles Dragchain capable Head A: IP65, IP66K, IP67; Head B: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free
	CAM12.A8-11233268 Artigo nº: 11233268	M12, male, A-coded, 8-poles; PUR, 500 cm, shielded; M12, female, A-coded, 8-poles Dragchain capable Head A: IP65, IP66K, IP67; Head B: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free
	CAM12.A8-11233269 Artigo nº: 11233269	M12, male, A-coded, 8-poles; PUR, 1000 cm, shielded; M12, female, A-coded, 8-poles Dragchain capable Head A: IP65, IP66K, IP67; Head B: IP65, IP66K, IP67 Cable: good resistance against chemicals, flames, oils Halogen free

Measuring wheels

	MR752.10A Small measuring wheel Artigo nº: 11011440	Circumference 30.48 cm Surface profile: Smooth Surface material: Polyurethan Bore ø10 mm
	MR241.10D Small measuring wheel Artigo nº: 11033281	Circumference 20 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø10 mm
	MR261.10A Small measuring wheel Artigo nº: 11033290	Circumference 20 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø10 mm
	MR291.10D Small measuring wheel Artigo nº: 11033300	Circumference 20 cm Surface profile: Knurled Surface material: Hytrel TPE-E Bore ø10 mm
	MR512.10A Large measuring wheel Artigo nº: 11033308	Circumference 50 cm Surface profile: Cross-knurled Surface material: Aluminium Bore ø10 mm
	MR552.10A Large measuring wheel Artigo nº: 11033323	Circumference 50 cm Surface profile: Smooth Surface material: Polyurethan Bore ø10 mm
	MR562.10A Large measuring wheel Artigo nº: 11033329	Circumference 50 cm Surface profile: Knopped rubber Surface material: Nitrile NBR Bore ø10 mm
	MR542.10D Large measuring wheel Artigo nº: 11038480	Circumference 50 cm Surface profile: Smooth Surface material: Hytrel TPE-E Bore ø10 mm
	MR592.10D Large measuring wheel Artigo nº: 11038481	Circumference 50 cm Surface profile: Knurled Surface material: Hytrel TPE-E Bore ø10 mm