Dados técnicos
Dados técnicos - Classificações eléctricas
- Voltage supply
- 8...30 VDC
- Reverse polarity protection
- Yes
- Consumption w/o load
- ≤100 mA (24 VDC)
- Initializing time typ.
- 180 ms after power on
- Interface
- Profibus-DPV0
- Function
- Multiturn
- Device adress
- Rotary switches in bus cover
- Steps per revolution
- ≤2097152 / 21 bit
- Number of revolutions
- ≤65536 / 16 bit
- Absolute accuracy
- ±0,01 °
- Sensing method
- Optical
- Code
- Binary
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
- Programmable parameters
- Steps per revolution
- Number of revolutions
- Preset
- Scaling
- Rotating direction
- Gear factor
- Diagnostic function
- Position or parameter error
- Multiturn sensing
- Operating hour counter
- Status indicator
- DUO-LED integrated in bus cover
- Approval
- UL approval / E217823
Dados técnicos - projeto mecânico
- Size (flange)
- ø58 mm
- Shaft type
- ø6 x 10 mm, solid shaft with flat
- Flange
- Synchro flange
- Protection EN 60529
- IP 65 / IP 67 (with shaft seal)
- Operating speed
- ≤6000 rpm (+25 °C)
- Starting acceleration
- ≤1000 U/s²
- Starting torque
- ≤0,04 Nm (+25 °C, IP 65 / IP 67)
- Admitted shaft load
- ≤40 N axial
- ≤80 N radial
- Material
- Housing: aluminium
- Flange: aluminium
- Bus cover: zinc die-cast
- Shaft: stainless steel
- Operating temperature
- -25...+85 °C (see general information)
- Relative humidity
- 95 % non-condensing
- Resistance
- EN 60068-2-6
- Vibration ±0.75 mm - 10-58 Hz, 10 g - 58-2000 Hz
- EN 60068-2-27
- Shock 200 g, 3 ms
- Weight approx.
- 550 g
- Connection
- Cable gland
Software
Software
-
EN580C / Multiturn - describing file
Transferências
Data sheet
-
Data sheet – EN580C.ML-SU06.HH2PB.21160.H
-
Data sheet – EN580C.ML-SU06.HH2PB.21160.H
-
Data sheet – EN580C.ML-SU06.HH2PB.21160.H
Quickstart
-
EN580C.ML
Software Manual
-
EN580C - Profibus
-
EN580C - Profibus
Certificates / approvals
-
UL-Listing: E217823
Declaration of conformity
-
DoC / CoC - EN580C
CAD
-
EN580C.xL-SU06.HH2PB.xxxx.H / IGES
-
EN580C.xL-SU06.HH2PB.xxxx.H / STEP
-
EN580C.xL-SU06.HH2PB.xxxx.H / PARASOLIDS
EPLAN
-
Link para o portal de dados
Acessórios
Mounting accessories
|
Set of eccentric fixings type A
Artigo nº: 11065545 |
|
|
Mounting adaptor
For encoders with synchro flange
Artigo nº: 10117667 |
|
|
Set of eccentric fixings for mounting clamp (10117667)
Artigo nº: 10117668 |
|
|
Bearing flange for encoders with synchro flange (Z 119.035)
Artigo nº: 10158124 |
|
|
Spring washer coupling (D1=6 / D2=10)
For encoder with solid shaft
Artigo nº: 10141132 |
|