|
|
|
|
---|---|---|---|
|
|||
AWG | 24 | 24 | |
Acceleration (C-track) | max. 5 m/s² | ||
Bending radius (fixed) | min. 5 × outer diameter | ||
Bending radius (mobile) | min. 10 × outer diameter | ||
Cable diameter | 7 mm ± 5% | 7 mm ± 5% | |
Cable length | 10 m | 1000 cm | 1000 cm |
Cable type | 3 | ||
Cable weight | approx. 66 g/m | ||
Cable: Temperature range (fixed) | - 40 ...+ 80 °C | ||
Cable: Temperature range (mobile) | - 25 ...+ 80 °C | ||
Cable: Test voltage | 2 kV AC core-core ; 2 kV AC core-shield | ||
Conductor structure | 32 × 0,1 mm | 32 × 0,1 mm | |
Conductor: Material | Copper, bare | ||
Connection | Connector M12, 8-pin | ||
Eclass | 27060311 | ||
External sheath: Color | Black | Black | |
External sheath: Material | PUR | PUR | |
Head A: Angle cable outlet | 0° | ||
Head A: Body color | Black | ||
Head A: Coding | A | ||
Head A: Connection | M12 | ||
Head A: Gasket material | FKM | ||
Head A: Gender | Female | ||
Head A: Knurled nut material | Zinc-pressure die casting, surface Ni | ||
Head A: LED | No | ||
Head A: No. of poles | 8 | ||
Head A: Tightening torque | 0,6 Nm | ||
Head A: Width across flats | AF13 | ||
Head B: Connection | Open-ended wires | ||
Insulation: Material | PP | ||
Labeling sleeve side A | Yes | ||
Labeling sleeve side B | Yes | ||
Length tolerance | ± 15 cm | ± 15 cm | |
No. of torsion cycles | approx. 2000000 Cycles | ||
No. of bending cycles (C-track) | approx. 5000000 Cycles | ||
Nominal voltage | 300 V | ||
Number and diameter of wires | 8x0.25 | ||
Number of wires | 8 | ||
Operating temperature | -40...+80 °C (fixed cable) -25...+80 °C (moved cable) |
||
Operating voltage (only UL listed) | 30 V AC/DC | ||
Outer diameter | ≈ 5,9 mm | ||
Paired stranding | No | ||
Shielded | Yes | Yes | |
Shielding: Covering | approx. 80 % | ||
Shielding: Material | Copper, tinned | ||
Single wire diameter | 0,1 mm | ||
Stripping length | 60 mm | ||
Torsion speed | max. 35 cycles/min | ||
Torsion stress in ° | ± 30 °/m | ||
Total stranding | 8 wires strand around core-filler | ||
Travel speed (C-track) | max. 3,3 m/s | ||
Traversing path (horizontal) | max. 5 m | ||
Weight approx. | 550 g | ||
Wire cross section | 0.25 mm² | 0.25 mm² | |
Wire diameter incl. isolation | 1,2 mm ± 5% | ||
Wire processing | No | ||
Condições ambientais | |||
Cable: Chemical resistance | Good (DIN EN 60811-404) | ||
Cable: Flame resistance | Conform UL 1581 §1090 (H), CSA FT2, IEC 60332-2-2 | ||
Cable: Oil resistance | Good (DIN EN 60811-404) | ||
Cable: Silicone-free | Yes | ||
Cable: Temperature range (fixed) | - 40 ...+ 80 °C | ||
Dragchain capable | Yes | ||
Head A: Acid and alkali resistant | No | ||
Head A: Chemical resistance | No | ||
Head A: Flame resistance | HB (UL 94) | ||
Head A: Oil resistance | ASTM 1 oil, mineral oils, limited to hydraulic oils | ||
Head A: Pollution degree | 3 | ||
Temperature range (fixed) | - 25 ...+ 80 °C | ||
Temperature range (mobile) | - 25 ...+ 80 °C | ||
Dados Elétricos | |||
Contact resistance | max. 30 mOhm | ||
Nominal voltage | 300 V | ||
Operating voltage | max. 30 V AC/DC | ||
Operating voltage (only UL listed) | 30 V AC/DC | ||
Operating current per contact | max. 2 A | ||
Dados mecânicos | |||
Acceleration (C-track) | max. 5 m/s² | ||
Bending radius (fixed) | min. 5 × outer diameter | ||
Bending radius (mobile) | min. 10 × outer diameter | ||
Head A: Degree of protection | IP65, IP66K, IP67 | ||
No. of torsion cycles | approx. 2000000 Cycles | ||
No. of bending cycles (C-track) | approx. 5000000 Cycles | ||
Torsion speed | max. 35 cycles/min | ||
Torsion stress in ° | ± 30 °/m | ||
Travel speed (C-track) | max. 3,3 m/s |