IR18V.D08L-F50.UA1Z.9BDU/0035_A002_E012

Artigo nº: 11177441

0 … 8 mm
voltage output
flylead connector DT04-3P 3 pin
-40 … 85 °C
Protection class IP68 / IP69K

> 10 peças imediatamente disponíveis no estoque

Dados técnicos

mostrar tudo

dados gerais

Mounting type

Flush

Special type

Linearized
Vehicle

Measuring distance Sd

0 … 8 mm

Sensitivity

0,5 V/mm

Resolution

< 0,008 mm (stat.)
< 0,01 mm (dynam.)

Repeat accuracy

0,016 mm

Linearity error

± 120 µm

Temperature drift

± 8 % (Full Scale)

Approvals/certificates

EN 60947-5-2 / EN 60947-5-7
EN 13309:2010 ¹⁾ ³⁾
EN ISO 14982:2009 ¹⁾ ²⁾
ISO 13766:2006 ¹⁾

Dados Elétricos

Response time (factory characteristic)

< 1 ms

Voltage supply range +Vs

7 … 32 VDC , (12 V DC vehicle power)

Current consumption max. (no load)

15 mA

Output circuit

Analog 0,5 ... 4,5 VDC

Load resistance

> 900 Ohm

Short circuit protection

Reverse polarity protection

Conducted inteference

ISO 7637-2, ISO 16750-2, details see section "Test pulses"

Off-Highway Electromagnetic immunity

ISO 11452-4: 200mA
ISO 11452-2: 100V/m
Based on UN / ECE R10 Rev 5 ch. 6.8 (no ECE type approval available)

Off-Highway Emission

EN 55011
Based on UN / ECE R10 Rev 5 ch. 6.5, 6.6 (no ECE type approval available)

Dados mecânicos

Design

Cylindrical threaded

Material (sensing face)

Housing material

Brass nickel plated

Dimension

18 mm

Housing length

50 mm

Connection types

Flylead connector DT04-3P 3 pin

Tightening torque max.

40 Nm (A: 28 Nm, B: 28 Nm)

Condições ambientais

Operating temperature

-40 … +85 °C

Protection class

IP 68 (sensing face/sensor)
IP 68 (1,5 m, 24 h)
IP 69K (sensing face)

Modelo 3D

mostrar tudo

Modelo 3D

A criação de modelos CAD requer um registro externo no CADENAS.

Transferências

mostrar tudo

Data sheet

Data sheet – IR18V.D08L-F50.UA1Z.9BDU/0035_A002_E012
- ZH (pdf | 1 MB)
Data sheet – IR18V.D08L-F50.UA1Z.9BDU/0035_A002_E012
- FR (pdf | 1018 KB)
Data sheet – IR18V.D08L-F50.UA1Z.9BDU/0035_A002_E012
- DE (pdf | 1008 KB)
Data sheet – IR18V.D08L-F50.UA1Z.9BDU/0035_A002_E012
- EN (pdf | 1020 KB)

Quickstart

Quickstart - IR18V.D08L-F50.UA1Z.9BDU/0035_A002_E012
- EN/DE/FR (pdf | 162 KB)

Certificates / approvals

DoC / CoC - IR18V
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 280 KB)

EPLAN

Link para o portal de dados
- Link para o portal de dados

Diagramas

mostrar tudo

Test pulse

The selected altAttribute does not exist!

(png | 21 KB)

Desenhos

mostrar tudo

Acessórios

mostrar tudo

Mounting accessories

	Sensofix series 18 Artigo nº: 10151658	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-M18.STANDARD Mounting bracket series 18 Artigo nº: 11172096	Material: Steel galvanized
	ZADAP-M18.SHORT Mounting bracket short series 18 (L design) Artigo nº: 11171584	Material: Steel galvanized
	ZADAP-M18.LONG Mounting bracket long series 18 (L design) Artigo nº: 11172095	Material: Steel galvanized
	Mounting rod with mounting plate holder 200 mm Artigo nº: 11707685	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 300 mm Artigo nº: 11707686	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 200 mm Artigo nº: 11707688	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 250 mm Artigo nº: 11707697	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 250 mm Artigo nº: 11707698	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 300 mm Artigo nº: 11707687	Material: Aluminium Part of an assembly Different lengths available
	Mounting plate series 500 and ø18 mm Artigo nº: 11707699	Material: Steel Part of an assembly
	Mounting base Artigo nº: 11707702	Material: Plastic (PA) Part of an assembly
	Two-way connector Artigo nº: 11707703	Material: Plastic (PA) Part of an assembly