Suisse
ch
Français
Caractéristiques techniques
- Head A: Connection
- M12
- Head A: Angle cable outlet
- 90°
- Head A: Cable outlet to inlay
- 315°
- Head A: Gender
- Male
- Head A: Coding
- D
- Head A: No. of poles
- 4
- Head A: LED
- No
- Head A: Width across flats
- AF13
- Head A: Tightening torque
- 0,6 Nm
- Head A: Knurled nut material
- Zinc-pressure die casting, surface Ni
- Head A: Body color
- Black
- Labeling sleeve side A
- Yes
- Head B: Connection
- RJ45
- Head B: Angle cable outlet
- 0°
- Head B: Gender
- Male
- Head B: No. of poles
- 4
- Head B: LED
- No
- Head B: Body color
- Black
- Labeling sleeve side B
- Yes
- Cable length
- 500 cm
- Length tolerance
- ± 7,5 cm
- Shielded
- Oui
- Conductor structure
- 19 × 0,16 mm
- AWG
- 22/19
- External sheath: Material
- PUR
- External sheath: Color
- Green
- Cable diameter
- 6,6 mm ± 5%
Cable
- Cable: Temperature range (mobile)
- - 20 ...+ 60 °C
- Cable: Temperature range (fixed)
- - 40 ...+ 80 °C
- Operating voltage (only UL listed)
- 30 V DC
- Shielded
- Oui
- Shielding: Covering
- approx. 85 %
- Characteristic impedance
- 100 mOhm ± 15%
- Signal delay
- 5 ns/m
- Transmission rate
- 100 MBit/s
- Bending radius (fixed)
- 52,8 mm
- Length tolerance
- ± 7,5 cm
- Cable length
- 500 cm
- AWG
- 22/19
- Bending radius (fixed)
- min. 8 × outer diameter
- Bending radius (mobile)
- min. 12 × outer diameter
- Cable weight
- approx. 67 g/m
- Conductor structure
- 19 × 0,16 mm
- Cable diameter
- 6,6 mm ± 5%
- Insulation resistance
- min. 5 MOhm x m
- Conductor: Material
- Copper, tinned
- External sheath: Material
- PUR
- Insulation: Material
- PE
- Shielding: Material
- Copper, tinned; PET aluminium coated
- Nominal voltage
- 300 V
- Paired stranding
- No
- Single wire diameter
- 0,16 mm
- Cable: Test voltage
- 2 kV AC
- Torsion stress in °
- ± 180 °/m
- Wire processing
- No
- Wire diameter incl. isolation
- 1,6 mm ± 5%
- External sheath: Color
- Green
- Protocols
- CAT5e
Données électriques
- Operating voltage
- max. 60 V DC
- Operating voltage (only UL listed)
- 30 V DC
- Nominal voltage
- 300 V
- Contact resistance
- max. 30 mOhm
- Operating current per contact
- max. 1,5 A
Données mécaniques
- Head A: Degree of protection
- IP67
- Head B: Degree of protection
- IP20
- Bending radius (mobile)
- min. 12 × outer diameter
- Bending radius (fixed)
- min. 8 × outer diameter
- Torsion stress in °
- ± 180 °/m
Conditions ambiantes
- Temperature range (mobile)
- - 20 ...+ 60 °C
- Temperature range (fixed)
- - 25 ...+ 80 °C
- Cable: Temperature range (fixed)
- - 40 ...+ 80 °C
- Dragchain capable
- No
- Head A: Chemical resistance
- No
- Head A: Flame resistance
- HB (UL 94)
- Head A: Oil resistance
- ASTM 1 oil, mineral oils, limited to hydraulic oils
- Head A: Acid and alkali resistant
- No
- Head A: Pollution degree
- 3
- Head B: Chemical resistance
- No
- Head B: Flame restistance
- HB (UL 94)
- Head B: Oil resistance
- ASTM 1 oil, mineral oils, limited to hydraulic oils
- Head B: Acid and alkali resistant
- No
- Head B: Pollution degree
- 3
- Cable: Chemical resistance
- No
- Cable: Flame resistance
- Conform UL 1581 §1060 (FT1), §1061 (cable flame), §1080 (VW-1), IEC 60332-1-2 Std.
- Cable: Oil resistance
- Conform IEC 60811-2-1, ICEA S-82-552, ASTM-oil 1 Std.
- Cable: Acid and alkali resistant
- No
- Cable: Silicone-free
- Oui
- Eclass
- 27061801
Téléchargements
Fiche technique
-
Fiche technique – KSW 33A/KSG45AR0500G/E
-
Fiche technique – KSW 33A/KSG45AR0500G/E
-
Fiche technique – KSW 33A/KSG45AR0500G/E
Certifications / Approbations
-
DoC / CoC - KSW, KSG
Dessins
Side A: Technical drawing
Side A: Coding
Side B: Technical drawing
Side B: Coding
Connection diagram
Accessoires
Torque wrench
|
CAM12.WS13-11238694
Numéro d'article: 11238694 |
|
|
CAM12.W13-11238690
Numéro d'article: 11238690 |
|