Suisse
ch
Français
Caractéristiques techniques
- Head A: Connection
- M12
- Head A: Angle cable outlet
- 90°
- Head A: Gender
- Male
- Head A: Coding
- D
- Head A: No. of poles
- 4
- Head A: LED
- No
- Head A: Width across flats
- AF13
- Head A: Tightening torque
- 0,6 Nm
- Head A: Knurled nut material
- Zinc-pressure die casting, surface Ni
- Head A: Body color
- Black
- Labeling sleeve side A
- Yes
- Head B: Connection
- RJ45
- Head B: Angle cable outlet
- 0°
- Head B: Gender
- Male
- Head B: Coding
- C
- Head B: No. of poles
- 4
- Head B: LED
- No
- Head B: Body color
- Black
- Labeling sleeve side B
- Yes
- Cable length
- 500 cm
- Shielded
- Oui
- AWG
- 22
- External sheath: Material
- PUR
- External sheath: Color
- Green
- Cable diameter
- 6,7 mm ± 5%
- Wire cross section
- 0.382 mm²
Cable
- Shielded
- Oui
- Transmission rate
- 100 MBit/s
- Bending radius (fixed)
- 33,5 mm
- Number of wires
- 4
- Number and diameter of wires
- 4x0,38
- Cable length
- 500 cm
- AWG
- 22
- Cable diameter
- 6,7 mm ± 5%
- Conductor: Material
- Copper, tinned
- External sheath: Material
- PUR
- Insulation: Material
- PE
- Shielding: Material
- Copper, tinned
- Paired stranding
- No
- Torsion stress in °
- ± 180 °/m
- Total stranding
- 4 wires strand around core-filler
- Wire cross section
- 0.382 mm²
- Wire processing
- No
- External sheath: Color
- Green
Données mécaniques
- Head A: Degree of protection
- IP67
- Head B: Degree of protection
- IP20
- Torsion stress in °
- ± 180 °/m
Conditions ambiantes
- Dragchain capable
- No
- Head A: Chemical resistance
- No
- Head A: Flame resistance
- HB (UL 94)
- Head A: Oil resistance
- Good resistance to ASTM 1 oil and mineral oils. Limited resistance to hydraulic oils. If other oils are used, the resistance must be checked in relation to the application.
- Head A: Acid and alkali resistant
- No
- Head A: Pollution degree
- 3
- Head B: Chemical resistance
- No
- Head B: Flame restistance
- HB (UL 94)
- Head B: Oil resistance
- Good resistance to ASTM 1 oil and mineral oils. Limited resistance to hydraulic oils. If other oils are used, the resistance must be checked in relation to the application.
- Head B: Acid and alkali resistant
- No
- Head B: Pollution degree
- 3
- Cable: Flame resistance
- Conform UL 1581 §1090, §1100 (FT2)
- Cable: Oil resistance
- Conform IEC 60811-2-1, ICEA S-82-552
- Cable: Silicone-free
- Oui
- Eclass
- 27061801
Téléchargements
Fiche technique
-
Fiche technique – CAM12.D4-11249721
-
Fiche technique – CAM12.D4-11249721
-
Fiche technique – CAM12.D4-11249721
Certifications / Approbations
EPLAN
-
Lien vers le Data Portal