Suisse
ch
Français
Caractéristiques techniques
- Head A: Connection
- M12
- Head A: Angle cable outlet
- 0°
- Head A: Gender
- Male
- Head A: Coding
- A
- Head A: No. of poles
- 5
- Head A: LED
- No
- Head A: Width across flats
- AF14
- Head A: Tightening torque
- 0,6 Nm
- Head A: Knurled nut material
- Stainless steel (V4A)
- Head A: Body color
- Blue
- Labeling sleeve side A
- No
- Head B: Connection
- M12
- Head B: Angle cable outlet
- 90°
- Head B: Gender
- Female
- Head B: Coding
- A
- Head B: No. of poles
- 5
- Head B: LED
- No
- Head B: Width across flats
- AF14
- Head B: Knurled nut material
- Stainless steel (V4A)
- Head B: Body color
- Blue
- Head B: Gasket material
- EPDM
- Labeling sleeve side B
- No
- Cable length
- 200 cm
- Shielded
- No
- AWG
- 22
- External sheath: Material
- TPE-S
- External sheath: Color
- Blue
- Wire cross section
- 0,34 mm²
Cable
- Shielded
- No
- Cable length
- 200 cm
- AWG
- 22
- Torsion speed
- max. 35 cycles/min
- Conductor: Material
- Copper, bare
- External sheath: Material
- TPE-S
- Insulation: Material
- PP
- Paired stranding
- No
- Torsion stress in °
- ± 180 °/m
- Total stranding
- 5 wires strand around core-filler
- Wire cross section
- 0,34 mm²
- Wire processing
- No
- External sheath: Color
- Blue
Données mécaniques
- Head A: Degree of protection
- IP65, IP68, IP69K
- Head B: Degree of protection
- IP65, IP68, IP69K
- Torsion speed
- max. 35 cycles/min
- Torsion stress in °
- ± 180 °/m
Conditions ambiantes
- Dragchain capable
- Oui
- Head A: Chemical resistance
- Chemical resistance tested according to ECOLAB. If other media are used, the material resistance must be tested according to the application.
- Head A: Flame resistance
- HB (UL 94)
- Head A: Oil resistance
- Good resistance to ASTM 1 oil and mineral oils. Limited resistance to hydraulic oils. If other oils are used, the resistance must be checked in relation to the application.
- Head A: Acid and alkali resistant
- Chemical resistance tested according to ECOLAB. If other media are used, the material resistance must be tested according to the application.
- Head A: Pollution degree
- 3
- Head B: Chemical resistance
- Chemical resistance tested according to ECOLAB. If other media are used, the material resistance must be tested according to the application.
- Head B: Flame restistance
- HB (UL 94)
- Head B: Oil resistance
- Good resistance to ASTM 1 oil and mineral oils. Limited resistance to hydraulic oils. If other oils are used, the resistance must be checked in relation to the application.
- Head B: Acid and alkali resistant
- Chemical resistance tested according to ECOLAB. If other media are used, the material resistance must be tested according to the application.
- Head B: Pollution degree
- 3
- Cable: Acid and alkali resistant
- Good (analogue FDA 21 178.3620, 178.3297, 177.1520)
- Cable: Silicone-free
- Oui
- Eclass
- 27060311
Téléchargements
Fiche technique
-
Fiche technique – CAM12.A5-11249695
-
Fiche technique – CAM12.A5-11249695