VCXU-65C.R

Numéro d'article: 11175751

3072 x 2048 px
Sony IMX178
1/1.8" CMOS
47 fps
USB 3.0

N'est plus disponible

Nous seroins heureux de vous aider à choisir des produits alternatfs

Produit alternatif : VCXU.2-65C.R

Comparer les produits

Caractéristiques techniques

Tout afficher

information du capteur

Sensor

Sony IMX178

Mono/Color

Color

Sensor type

1/1.8″ CMOS

Shutter type

Rolling shutter
Global reset shutter

Résolution

3072 × 2048 px

Pixel size

2.4 × 2.4 µm

Exposure time

0,014 … 60000 ms

Dark noise

2,89 e-

Saturation capacity

14231 e-

Dynamic range

71,9 dB

Signal-to-noise ratio

41,5 dB

Quantum efficiency

56,4 % @ 465 nm
61,7 % @ 536 nm
47,5 % @ 631 nm

formats d'acquisition

Image formats, interface frame rate max.

Full Frame, 3072 × 2048 px, max. 47 fps
Binning 2×2, 1536 × 1024 px, max. 47 fps
Binning 2×1, 1536 × 2048 px, max. 47 fps
Binning 1×2, 3072 × 1024 px, max. 47 fps

Image formats, aquisition frame rate max. (Burst Mode)

Full Frame, 3072 × 2048 px, max. 47 fps

Pixel formats

BayerRG8
BayerRG10
BayerRG12
BayerRG12 Packed
Mono8
Mono10
Mono12
Mono12 Packed
RGB8
BGR8

Analog controls

Gain (0 … 26 dB)
Offset (0 … 255 LSB 12 Bit)

Color models

Mono
Raw Bayer
RGB
BGR

caractéristiques de l'appareil

Basic Functions

Exposure
Gain / Color Gain
Trigger / Exposure Active (Flash)
Binning 2x2
Partial Scan
Offset
Free Running Mode (Live Image)

Auto Functions

Exposure Auto
Gain Auto
White Balance Auto
Color Transformation Auto

Image Pre-processing

Image Flipping (X/Y)
Color Processing (RGB, BGR, Mono)
Color Enhancement (with optimized ColorTransformationMatrix)
LUT / Gamma

Acquisition / Interface

Burst Mode
Adjustable Framerate
Device Link Throughput Limit
Internal Image Buffer

Synchronisation

free running
trigger

Trigger sources

Hardware
Software

Trigger delay

0 … 2 s, tracking and buffering of up to 256 trigger signals

Process Synchronization

Events
Timer
Trigger Delay
Debouncer
Counter
Trigger via Action CMD (GigE)
Additional Output Modes (e.g. Trigger Ready)
Chunk data inside transferred image
Encoder support via Counter End trigger source

Additional Functions

User Set
Integrated temperature sensor
Readable additional information (e.g. sensor information)
Save Custom Data

Internal image buffer

450 MB
25 images (Trigger Mode)
1 image (Free Running Mode)

Interfaces et connecteurs

Data interface

USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B

Process interface

M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180)

Power supply

via USB 3.0 interface

Données mécaniques

Lens mount

C-mount

Width

29 mm

Height

29 mm

Profondeur

38 mm

Poids

≤ 90 g

Matériau

zinc die casting, baked varnish (until 02-2020 nickel-chrome-plated), IP 40

Données électriques

Puissance absorbée

Approx. 3.0 W @ 47 fps

Operating voltage

5 VDC (via USB3.0 interface)

Flash memory size

128 kB

Conditions ambiantes

Operating temperature

0 … +65 ° @ T = measurement point

Température en magasin

-20 … +70 °C

Humidity

10 … 90 % (non-condensing)

Classe de protection

IP 40 (with mounted lens and cable)

E/S numériques

Lines

1 input line
1 output line
2 general purpose lines

Conformité

Conformity

CE
RoHS
EAC

Logiciel

Tout afficher

Software

Baumer neoAPI (Windows, Linux, Linux ARM)
- Link
Baumer Camera Explorer (Windows, Linux, Linux ARM)
- Link
Baumer GAPI SDK v2.x (Windows, Linux, Linux ARM)
- Link
Baumer GAPI software examples
- Link
Third Party Software
- Link

Téléchargements

Tout afficher

Fiche technique

Fiche technique – VCXU-65C.R
- DE (pdf | 793 KB)
Fiche technique – VCXU-65C.R
- EN (pdf | 792 KB)
Fiche technique détaillée
- EN (pdf | 515 KB)

Guide rapide

Quick Start Guide VCXU cameras
- EN (pdf | 867 KB)

Instructions d'utilisation

User’s Guide VCXG / VCXG.I / VCXU cameras
- EN (pdf | 11 MB)

Certifications / Approbations

CE certification
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 279 KB)

Additional information

EMVA 1288 Summary Sheet
- EN (pdf | 287 KB)
Compliant list for Baumer industrial cameras (USB 3.0)
- EN (pdf | 642 KB)

Informations supplémentaires

Application Notes
- Link

CAD

VCXU-65C.R / STEP
- (zip | 332 KB)

Dessins

Tout afficher

Dessin d'encombrement

The selected altAttribute does not exist!

(png | 93 KB)

Accessoires

Tout afficher

Starter Kit

VCXU Starter Kit

Numéro d'article: 11165159

USB 3.0 PCIe interface board (2 ports)
USB 3.0 cable, 3,0 m
process interface cable 5,0 m
Mounting Adapter Type E
Software (WINDOWS, LINUX, LINUX ARM) via Download
camera not included

PCIe/Adapter

	ZVA-PCIe_2x_external_USB_3.0 Numéro d'article: 11141165	PCI Express USB 3.0 interface board PCIe x1 (single lane) 2 ports single lane incl. 16.5 cm adapter cable SATA male connector to 1x SATA female connector and 1x Molex female connector cable with Molex connector for PC power supply mini bracket
	ZVA-IOI PCIe USB3.0 Quad Channel 4 Port PCIe USB 3.0, 4 ports Numéro d'article: 11119094	PCI Express USB 3.0 interface board with 4 ports Express Bus x4 Gen 2 supports screw lock connectors

Housing accessories

	Housing base set B V4A VCXG.I r IP69K Numéro d'article: 11207844	Housing base set in hygienic design (design according to EHEDG guidelines) to house VCXG.I cameras, IP69K protection Housing corpus with clamp elements to position the chosen VCXG.I camera M40 hygienic gland and M40 stainless steel counter nut to for fixation at the machine wall sealed up cable gland for IP68 protection inside the machine tube thread: M60 length 206,5 mm especially suitable for Pharma and Food & Beverage applications (incl. Splash and food zones) To be ordered separately: stainless steel lens protection Tube M60 V4A IP69K (11208732) necessary to close the housing
	Clamp Elements CX 29 x 29 mm V4A IP69K Numéro d'article: 11217114	Housing base set in hygienic design (design according to EHEDG guidelines) to house VCXG.I cameras, IP69K protection Housing corpus with clamp elements to position the chosen VCXG.I camera M40 hygienic gland and M40 stainless steel counter nut to for fixation at the machine wall sealed up cable gland for IP68 protection inside the machine tube thread: M60 length 206,5 mm especially suitable for Pharma and Food & Beverage applications (incl. Splash and food zones) To be ordered separately: stainless steel lens protection Tube M60 V4A IP69K (11208732) necessary to close the housing
	Housing V4A IP69K Mounting Tool Numéro d'article: 11208719	Mounting tool to seal the stainless steel V4A VCXG.I r IP69K housing system
	Tube M60 V4A IP69K Acryl Numéro d'article: 11208732	stainless steel lens protection with PMMA cover glass (FDA certified) suitable for Housing base set B V4A VCXG.I r IP69K (11208744) thread: M60 length 31 mm
	Cover Glass Replacement Acryl 2" Numéro d'article: 11217113	Replacement cover glass for exchange in "Tube M60 V4A IP69K Acryl" (11208732) PMMA material FDA certified
	Sealing ReplacementSet Housing V4A IP69K Numéro d'article: 11217115	Complete sealing replacement set to exchange all sealings of the stainless steel V4A VCXG.I r IP69K housing system using the "Tube M60 V4A IP69K Acryl" incl. Flouroprene XP41 sealings, TPU sealing, EPDM O-rings (inside only)
	Rotation lock M40 VA4 IP69K Numéro d'article: 11208731	Rotation lock for Housing base set B V4A VCXG.I r IP69K (11208744) with clamping part for safe position locking

Lens accessories

	Filter CL/27 (R2) ROT PENTAX Numéro d'article: 11006551	Ricoh color filter (red)
	Filter Pol PENTAX PL27 Numéro d'article: 11092000	Ricoh polarization filter linear filter thread
	ZVI-FILTER POL. PL30.5 C91353 Numéro d'article: 11175428	Ricoh polarization filter linear filter thread M30.5
	ZVI-Filter Pol. PL40.5 C91301 Numéro d'article: 11167713	Ricoh polarization filter linear filter thread M40.5
	ZVL-Adapter S-Mount / C-Mount Numéro d'article: 11167984	Adapter S-mount / C-mount
	ZVF-Filter Holder Mounting Tool Numéro d'article: 11177601	Mounting tool to screw in filter holders
	Close-up ring set ZVS-FP-RGST six-piece Numéro d'article: 11010529	Close-up ring set ZVS-FP-RGST six-piece 0,5, 1, 5, 10, 20, 40 mm

Lens

	ZVL-E3196B Numéro d'article: 11701908	Evetar lens 12 mm F 2,0 format 1/1,8" M.O.D. 0,3 m S-mount
	ZVL-M0828-MPW3 Numéro d'article: 11703660	Computar lens 8 mm F 2,8-16 format 2/3″ M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-M1228-MPW3 Numéro d'article: 11704871	Computar lens 12 mm F 2,8-16 format 2/3″ M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-M1628-MPW3 Numéro d'article: 11704872	Computar lens 16 mm F 2,8-16 format 2/3″ M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-M2528-MPW3 Numéro d'article: 11704873	Computar lens 25 mm F 2,8-16 format 2/3″ M.O.D. 0,2 m locating screw for aperture and focus C-mount
	ZVL-M3528-MPW3 Numéro d'article: 11704874	Computar lens 35 mm F 2,8-16 format 2/3″ M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-M5028-MPW3 Numéro d'article: 11704875	Computar lens 50 mm F 2,8-16 format 2/3″ M.O.D. 0,3 m locating screw for aperture and focus C-mount
	ZVL-FL-BC1220-9M Numéro d'article: 11201119	Ricoh Imaging lens 12 mm F 2.0-16 format 1,1" M.O.D. 0.08 m locating screw for aperture and focus C-mount
	ZVL-FL-BC1618-9M Numéro d'article: 11201121	Ricoh Imaging lens 16 mm F 1.8-16 format 1,1" M.O.D. 0.08 m locating screw for aperture and focus C-mount
	ZVL-FL-BC2518-9M Numéro d'article: 11154325	Ricoh Imaging lens 25 mm F 1,8-16 format 1,1" M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-FL-BC3518-9M Numéro d'article: 11154326	Ricoh Imaging lens 35 mm F 1,6-16 format 1,1" M.O.D. 0,15 m locating screw for aperture and focus C-mount
	ZVL-FL-BC5024-9M Numéro d'article: 11154327	Ricoh Imaging lens 50 mm F 2,4-22 format 1,1" M.O.D. 0,2 m locating screw for aperture and focus C-mount
	ZVL-FL-BC7528-9M Numéro d'article: 11154328	Ricoh Imaging lens 75 mm F 2,8-32 format 1,1" M.O.D. 0,25 m locating screw for aperture and focus C-mount
	ZVL-LM6FC24M Numéro d'article: 11700795	Kowa lens 6,5 mm F 2,5-16 format 1,1" M.O.D. 0,1 m C-mount
	ZVL-LM8FC24M Numéro d'article: 11700796	Kowa lens 8,5 mm F 2,5-16 format 1,1" M.O.D. 0,1 m C-mount
	ZVL-LM12FC24M Numéro d'article: 11700791	Kowa lens 12 mm F 1,8-16 format 1,1" M.O.D. 0,1 m C-mount
	ZVL-LM16FC24M Numéro d'article: 11700739	Kowa lens 16 mm F 1,8-16 format 1,1" M.O.D. 0,1 m C-mount
	ZVL-LM25FC24M Numéro d'article: 11700738	Kowa lens 25 mm F 1,8-16 format 1,1" M.O.D. 0,1 m C-mount
	ZVL-LM35FC24M Numéro d'article: 11700793	Kowa lens 35 mm F 1,8-16 format 1,1" M.O.D. 0,2 m C-mount
	ZVL-LM50FC24M Numéro d'article: 11700794	Kowa lens 50 mmm F 1,8-16 format 1,1" M.O.D. 0,2 m C-mount
	ZVL-V0826-MPZ Numéro d'article: 11700363	Computar lens 8 mm F 2,6-16 format 1″ M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-V1226-MPZ Numéro d'article: 11700368	Computar lens 12 mm F 2,6-16 format 1″ M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-V1624-MPZ Numéro d'article: 11700366	Computar lens 16 mm F 2,4-16 format 1″ M.O.D. 0,1 m locating screw for aperture and focus C-mount
	ZVL-V2520-MPZ Numéro d'article: 11700364	Computar lens 25 mm F 2,0-16 format 1″ M.O.D. 0,15 m locating screw for aperture and focus C-mount
	ZVL-V3522-MPZ Numéro d'article: 11700365	Computar lens 35 mm F 2,2-16 format 1″ M.O.D. 0,2 m locating screw for aperture and focus C-mount
	ZVL-V5024-MPZ Numéro d'article: 11700367	Computar lens 50 mm F 2,4-16 format 1″ M.O.D. 0,2 m locating screw for aperture and focus C-mount

Cable

	KSG U2/KSGU6GC0300G Numéro d'article: 11702660	USB 3.0 interface cable screw lock Micro-B connector to type A (optional screw lock) connector, both connectors with die-cast housing length 3.0 m
	KSG U2/KSGU6GC0500G Numéro d'article: 11702816	USB 3.0 interface cable screw lock Micro-B connector to type A (optional screw lock) connector, both connectors with die-cast housing length 5.0 m
	Z-ESG 32FP0500G Shielded cable 8 wires, female connector, 5,0 m Numéro d'article: 11118810	shielded process interface cable M8/8-pin female connector to open wires cable carrier compatible length 5,0 m
	Z-ESW 31FH0500 90° Cable 8 wires, 5,0 m Numéro d'article: 11105262	process interface cable 90° angled M8/8-pin female connector to open wires length 5,0 m alternative article: CAM8.A8-11232605

Mountings and heat sinks

	Mounting Adapter Type D (Front) Numéro d'article: 11165176	mounting adapter for VCXU, VCXG and VCXG.I cameras incl. screw (hexagon socket) stable front side mounting
	Mounting Adapter Type E Numéro d'article: 11165173	camera mounting for cameras of the CX and EX series incl. screws (hexagon socket) stable bottom and tripod mounting
	Mounting Adapter Type H Numéro d'article: 11191852	camera mounting adapter for cameras of the CX, LX and QX series incl. screw (hexagon socket) rotatable mounting
	Heat Sink Type C Numéro d'article: 11165171	heat sink for cameras of the CX and EX series incl. screws (hexagon socket) 50 mm x 64 mm x 20 mm
	Adapter CX- / TX-Mount Numéro d'article: 11165175	mounting adapter for cameras of the CX and EX series to reach mounting dimensions of TX cameras incl. screws (hexagon socket)