Technical data
Données générales
Fonction
  • Barrière
Version
  • Détection d’objet transparent
Position de l’arriére plan Sde
  • 25 … 180 mm
Plage de détection Sa
  • 90% ... 85% Sde
L'atténuation du signal minimum
  • 10 %
Indication de fonctionnement
  • LED verte
Indication encrassement / réglage
  • Indication sortie clignotante
Indication sortie
  • LED jaune
Réglage de la portée de détection
  • qTeach
Distance foyer
  • 160 mm
Suppression influence réciproque
  • Oui
Forme du faisceau
  • Point
Axe d'alignement optique
  • < 1,5°
Source lumineuse
Source lumineuse
  • Diode laser rouge, pulsée
Classe laser
  • 1
Longueur d'ondes
  • 680 nm
Données électriques
Plage de tension +Vs
  • 10 … 30 VDC
Consommation max. (sans charge)
  • 20 mA (@ 10 VDC)
Courant absorbé moyen
  • 10 mA (@ 24 VDC)
Tension résiduelle Vd
  • <2 VDC
Fonction de commutation
  • Claire/sombre
Circuit de sortie
  • PNP complémenté
Courant de sortie
  • 50 mA
Protégé contre courts-circuits
  • Oui
Protégé contre inversion polarité
  • Oui
Données mécaniques
Largeur / Diamètre
  • 8 mm
Hauteur / Longueur
  • 25,1 mm
Profondeur
  • 15,8 mm
Forme du boîtier
  • Parallélépipédique
Fixation
  • Manchon avec filetage M3 (Acier inoxydable)
Matériau boîtier
  • Plastique (ASA, PMMA)
Face avant (optique)
  • PMMA
Version de raccordement
  • Câble 4-pôles, 2 m
Caractéristiques du câble
  • PVC / PVC 4 x 0,08 mm²
Ambient conditions
Protection class
  • IP 67
Operating temperature
  • -20 … +50 °C

3D-Model
3D-Model

Generating CAD-Models requires an external login to CADENAS.


Downloads
Data sheet
Operating Manual
EPLAN

Drawings
Drawings
Connection diagram
Beam characteristic (typically)
Laser warning

Accessories
Peripherals
The selected altAttribute does not exist! ZTEST-ALL.DIGITAL
Test unit for sensors digital

Article no.: 11084377

  • LED (red/green) for digital PNP/NPN signals
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
The selected altAttribute does not exist! ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Article no.: 11084376

  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
Mounting accessories
The selected altAttribute does not exist! 10150326
Sensofix series 10 / series 20

Article no.: 10150326

  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
The selected altAttribute does not exist! ZADAP-200.STRAIGHT
Mounting bracket O200

Article no.: 11206601

  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
The selected altAttribute does not exist! ZADAP-200.ANGLE_L
Mounting bracket O200 (L design)

Article no.: 11206602

  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
The selected altAttribute does not exist! ZADAP-200.ANGLE_S
Mounting bracket O200 (S design)

Article no.: 11206603

  • Material: stainless steel
  • Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
The selected altAttribute does not exist! ZADAP-200.SERIES10
Mounting bracket O200 - Retrofit for sensors series 10

Article no.: 11208477

  • Material: plastic
To the top
You are currently visiting International.
Change the website to see the appropriate content for your location.
Visit Website USA