International
int
Français
Caractéristiques techniques
- Head A: Connection
- M12
- Head A: Angle cable outlet
- 0°
- Head A: Gender
- Female
- Head A: Coding
- A
- Head A: No. of poles
- 4
- Head A: LED
- No
- Head A: Width across flats
- AF14
- Head A: Tightening torque
- 0,6 Nm
- Head A: Knurled nut material
- Stainless steel (V4A)
- Head A: Body color
- Blue
- Head A: Gasket material
- EPDM
- Labeling sleeve side A
- No
- Head B: Connection
- Open-ended wires
- Labeling sleeve side B
- No
- Cable length
- 2000 cm
- Length tolerance
- ± 30 cm
- Stripping length
- 20 mm
- Shielded
- Oui
- Conductor structure
- 42 × 0,1 mm
- AWG
- 22
- External sheath: Material
- TPE-S
- External sheath: Color
- Blue
- Cable diameter
- 5,6 mm ± 5%
- Wire cross section
- 0,34 mm²
Cable
- Cable: Temperature range (mobile)
- - 25 ...+ 105 °C
- Cable: Temperature range (fixed)
- - 40 ...+ 105 °C
- Operating voltage (only UL listed)
- 30 V AC/DC
- Shielded
- Oui
- Shielding: Covering
- approx. 85 %
- Bending radius (fixed)
- 28 mm
- Number of wires
- 4
- Number and diameter of wires
- 4x0,34
- Length tolerance
- ± 30 cm
- Cable length
- 2000 cm
- Acceleration (C-track)
- max. 10 m/s²
- AWG
- 22
- Bending radius (fixed)
- min. 5 × outer diameter
- Torsion speed
- max. 35 cycles/min
- Bending radius (mobile)
- min. 10 × outer diameter
- Cable weight
- approx. 45,1 g/m
- Conductor structure
- 42 × 0,1 mm
- Cable diameter
- 5,6 mm ± 5%
- Conductor: Material
- Copper, bare
- External sheath: Material
- TPE-S
- Insulation: Material
- PP
- Shielding: Material
- Copper, tinned
- No. of bending cycles (C-track)
- approx. 4000000 Cycles
- Nominal voltage
- 300 V AC
- No. of torsion cycles
- approx. 2000000 Cycles
- Paired stranding
- No
- Single wire diameter
- 0,1 mm
- Cable: Test voltage
- 3 kV
- Torsion stress in °
- ± 180 °/m
- Total stranding
- 4 wires strand
- Travel speed (C-track)
- max. 3 m/s
- Traversing path (horizontal)
- max. 10 m
- Wire cross section
- 0,34 mm²
- Wire processing
- No
- Wire diameter incl. isolation
- 1,27 mm ± 5%
- External sheath: Color
- Blue
Données électriques
- Operating voltage
- max. 60 V AC/DC
- Operating voltage (only UL listed)
- 30 V AC/DC
- Nominal voltage
- 300 V AC
- Contact resistance
- max. 30 mOhm
- Operating current per contact
- max. 4 A
Données mécaniques
- Head A: Degree of protection
- IP65, IP68, IP69K
- Bending radius (mobile)
- min. 10 × outer diameter
- Bending radius (fixed)
- min. 5 × outer diameter
- No. of bending cycles (C-track)
- approx. 4000000 Cycles
- Torsion speed
- max. 35 cycles/min
- Torsion stress in °
- ± 180 °/m
- No. of torsion cycles
- approx. 2000000 Cycles
- Acceleration (C-track)
- max. 10 m/s²
- Travel speed (C-track)
- max. 3 m/s
Conditions ambiantes
- Temperature range (mobile)
- - 25 ...+ 105 °C
- Temperature range (fixed)
- - 40 ...+ 105 °C
- Cable: Temperature range (fixed)
- - 40 ...+ 105 °C
- Dragchain capable
- Oui
- Head A: Chemical resistance
- Chemical resistance tested according to ECOLAB. If other media are used, the material resistance must be tested according to the application.
- Head A: Flame resistance
- HB (UL 94)
- Head A: Oil resistance
- ASTM 1 oil, mineral oils, limited to hydraulic oils
- Head A: Acid and alkali resistant
- ECOLAB tested
- Head A: Pollution degree
- 3
- Cable: Chemical resistance
- ECOLAB material resistance test passed
- Cable: Acid and alkali resistant
- Good (FDA 21 178.3620, 178.3297, 177.1520, EU 10/2011)
- Cable: Silicone-free
- Oui
- Eclass
- 27060311
Téléchargements
Fiche technique
-
Fiche technique – CAM12.A4-11232926
-
Fiche technique – CAM12.A4-11232926
-
Fiche technique – CAM12.A4-11232926
Certifications / Approbations
EPLAN
-
Lien vers le Data Portal
Dessins
Side A: Technical drawing
Side A: Coding
Side B: Technical drawing
Connection diagram
Dessins
Accessoires
Torque wrench
|
CAM12.W14-11238691
Numéro d'article: 11238691 |
|
|
CAM12.WS14-11238692
Numéro d'article: 11238692 |
|