International
int
Español
Datos técnicos
Datos técnicos: valores eléctricos nominales
- Voltage supply
- 5 VDC ±5 %
- 8...30 VDC
- Reverse polarity protection
- Yes
- Consumption w/o load
- ≤85 mA
- Pulses per revolution
- 200 … 2048
- Reference signal
- Zero pulse, width 90°
- Sensing method
- Optical
- Output frequency
- ≤120 kHz
- Output signals
- A, B, N + inverted
- Output stages
- TTL linedriver (short-circuit proof)
- HTL push-pull (short-circuit proof)
- Interference immunity
- EN 61000-6-2
- Emitted interference
- EN 61000-6-3
Datos técnicos: diseño mecánico
- Shaft type
- ø10 mm (blind hollow shaft)
- ø12 mm (blind hollow shaft)
- ø14 mm (blind hollow shaft)
- Protection EN 60529
- IP 65
- Operating speed
- ≤8000 rpm
- Starting torque
- ≤0,015 Nm (+20 °C)
- Material
- Housing: aluminium die-cast
- Shaft: stainless steel
- Operating temperature
- -20...+85 °C
- Relative humidity
- 90 % non-condensing
- Resistance
- EN 60068-2-6
- Vibration 10 g, 55-2000 Hz
- EN 60068-2-27
- Shock 100 g, 11 ms
- Connection
- Terminal box
- Weight approx.
- 350 g
Descargas
Data sheet
-
Catálogo – ITD 20 A 4 Y114
-
Catálogo – ITD 20 A 4 Y114
-
Catálogo – ITD 20 A 4 Y114
Declaration of conformity
-
DoC / CoC - ITD 20, ITD 28, ITD 40, ITD 42, ITD 48, ITD 70