2. ATD 2A A 4 Y 7
Datos técnicos
Datos técnicos: valores eléctricos nominales
Voltage supply
  • +UB= 12...30 VDC (IS-/US-version)
Reverse polarity protection
  • Yes
Consumption w/o load
  • ≤50 mA (24 VDC)
Interface
  • Analog (4...20 mA or 0...10 V)
Load resistor
  • ≥1 kΩ (recommended 10 kΩ) / voltage output
  • ≤500 Ω (recommended 470 Ω) / current output
Function
  • Singleturn
  • Multiturn
Measuring range
  • 90°, 180°, 360°
  • 2, 4, 8, 16 revolutions
Resolution
  • 16 bit
Steps per revolution
  • 16384 / 14 bit
Number of revolutions
  • 16 / 4 bit
Sensing method
  • Optical (singleturn)
  • Magnetical (multiturn)
Updating values
  • ≤130 µs
Code sequence
  • CW: ascending values with clockwise sense of rotation (looking at mounting surface)
Output stages
  • Voltage output (short-circuit proof)
  • Current output (short-circuit proof)
Interference immunity
  • EN 61000-6-2
Emitted interference
  • EN 61000-6-3
Datos técnicos: diseño mecánico
Size (flange)
  • ø58 mm
Shaft type
  • ø10 mm (through hollow shaft)
  • ø12 mm (through hollow shaft)
  • ø14 mm (through hollow shaft)
Protection EN 60529
  • IP 65
Operating speed
  • ≤8000 rpm (mechanical)
  • ≤6000 rpm (electric)
Starting torque
  • ≤0,02 Nm (+20 °C)
Material
  • Housing: aluminium
  • Shaft: stainless steel
Operating temperature
  • -20...+85 °C
Relative humidity
  • 90 % non-condensing
Resistance
  • EN 60068-2-6
  • Vibration 10 g, 55-2000 Hz
  • EN 60068-2-27
  • Shock 30 g, 11 ms
Weight approx.
  • 325 g
Connection
  • Connector M23 type 2, 12-pin
Mounting kit
  • 002
Descargas
Data sheet
Operating Manual
Declaration of conformity

Hasta la cima