2. OADR 20I6565/S14F
Datos técnicos
Datos generales
Measuring distance Sd
  • 30 … 130 mm
Special type
  • Washdown design
Adjustment
  • External
Teach-in range min.
  • > 3 mm
Power on indication
  • LED green
Soiled lens indicator
  • LED red
Resolution
  • 5 … 60 µm
Linearity error
  • ± 0,015 … 0,2 mm
Beam type
  • Line
Beam width
  • 2 … 1 mm
Beam height
  • 3 … 5 mm
Temperature drift
  • < 0,03 % Sde/K
Approvals/certificates
  • Ecolab
Light source
  • Pulsed red laser diode
Wave length
  • 650 nm
Laser class
  • 2
Datos eléctricos
Response time / release time
  • < 0,9 ms
Voltage supply range +Vs
  • 12 … 28 VDC
Current consumption max. (no load)
  • 100 mA
Output circuit
  • Analog
Output signal
  • 4 ... 20 mA / 0 ... 10 VDC
Load resistance (analog I)
  • < (+Vs - 6 V) / 0,02 A
Load resistance (analog U)
  • > 100 kOhm
Output current
  • 100 mA
Alarm output
  • PNP
Short circuit protection
  • Yes
Reverse polarity protection
  • Yes, Vs to GND
Datos mecánicos
Width / diameter
  • 20,3 mm
Height / length
  • 65 mm
Depth
  • 51 mm
Design
  • Rectangular
Housing material
  • Stainless steel 1.4404 (V4A)
Front (optics)
  • PMMA
Connection types
  • Connector M12 8 pin
Condiciones ambientales
Ambient light immunity
  • < 40 kLux
Protection class
  • IP 69K & proTect+
Operating temperature
  • 0 … +50 °C
Descargas
Data sheet
Quickstart
Operating Manual
Certificates / approvals
CAD
EPLAN

Diagramas
Resolution
The selected altAttribute does not exist!

(png | 106 KB)
Dibujos
Drawings
The selected altAttribute does not exist!

(png | 40 KB)
Connection diagram
The selected altAttribute does not exist!

(png | 108 KB)
Alignment of the laser line
The selected altAttribute does not exist!

(png | 14 KB)
Laser warning
The selected altAttribute does not exist!

(png | 168 KB)
Beam characteristic (typically)
The selected altAttribute does not exist!

(png | 60 KB)
Accesorios
Peripherals
The selected altAttribute does not exist! ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Artículo no..: 11084376
  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
Hasta la cima