2. Miniatura
  3. FEDM 12P5101
Datos técnicos
Datos generales
Type
  • Through beam sensor
Emitter / receiver
  • Receiver
Actual range Sb
  • 6 m
Nominal range Sn
  • 7,5 m
Alignment / soiled lens indicator
  • Flashing light indicator
Light indicator
  • LED yellow
Sensitivity adjustment
  • No
Datos eléctricos
Response time / release time
  • < 1 ms
Voltage supply range +Vs
  • 10 … 30 VDC
Current consumption max. (no load)
  • 17 mA
Current consumption typ.
  • 17 mA
Voltage drop Vd
  • <1,8 VDC
Output function
  • Light / dark operate
Output circuit
  • PNP
Output current
  • 100 mA
Short circuit protection
  • Yes
Reverse polarity protection
  • Yes
Datos mecánicos
Width / diameter
  • 12,4 mm
Height / length
  • 35 mm
Depth
  • 35 mm
Design
  • Rectangular
Housing material
  • Die-cast zinc
Front (optics)
  • PMMA
Connection types
  • Cable 4 pin, 2 m
Condiciones ambientales
Operating temperature
  • -25 … +65 °C
Protection class
  • IP 67
Descargas
Data sheet
Quickstart
Certificates / approvals
CAD
EPLAN

Dibujos
Drawings
The selected altAttribute does not exist!

(png | 11 KB)
Connection diagram
The selected altAttribute does not exist!

(png | 70 KB)
Accesorios
Fitting emitter
The selected altAttribute does not exist! FSDM 12D9601
Through beam sensors - miniature

Artículo no..: 10234245
  • emitter
  • through beam sensor
  • 6 m
  • pulsed red LED
  • cable 3 pin, 2 m
  • -25 … 65 °C
  • IP 67
The selected altAttribute does not exist! FSDM 12D9601/S35A
Through beam sensors - miniature

Artículo no..: 10234246
  • emitter
  • through beam sensor
  • 6 m
  • pulsed red LED
  • connector M8 4 pin
  • -25 … 65 °C
  • IP 67
Peripherals
The selected altAttribute does not exist! ZTEST-ALL.DIGITAL
Test unit for sensors digital

Artículo no..: 11084377
  • LED (red/green) for digital PNP/NPN signals
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
The selected altAttribute does not exist! ZTEST-ALL.ANALOG
Test unit for sensors analog & digital

Artículo no..: 11084376
  • Output via display (V or mA) or LED (PNP/NPN)
  • Teach-in of sensors with integrated Teach- button
  • Connection for plug in power supply (available as accessory)
Mounting accessories
The selected altAttribute does not exist! 10150328
Sensofix series 12

Artículo no..: 10150328
  • Clamps made of stainless steel
  • Ball pivots made of galvanized steel
  • Mounting panel made of stainless steel
The selected altAttribute does not exist! 10113873
Mounting bracket series 12 (L design)

Artículo no..: 10113873
  • Material: Steel
Hasta la cima