OR18.EL-NV1P.7BCV

Article no.: 11157820

receiver
through beam sensor
55 m
NPN complementary
potentiometer, 270°
cable 4 pin, 2 m
-10 … 55 °C
IP 67

6 pieces immediately available from stock

Technical data

show all

General data

Type

Through beam sensor

Emitter / receiver

Receiver

Actual range Sb

55 m

Nominal range Sn

60 m

Output indicator

LED yellow

Power on indication

LED green

Sensitivity adjustment

Potentiometer, 270°

Electrical data

Response time / release time

< 0.34 ms

Voltage supply range +Vs

10 … 30 VDC

Current consumption max. (no load)

45 mA

Current consumption typ.

35 mA

Voltage drop Vd

<2 VDC

Output function

Light / dark operate

Output circuit

NPN complementary

Output current

100 mA

Short circuit protection

Reverse polarity protection

Mechanical data

Width / diameter

18 mm

Height / length

77 mm

Design

Cylindrical threaded

Housing material

Brass nickel plated

Front (optics)

PMMA

Connection types

Cable 4 pin, 2 m

Ambient conditions

Operating temperature

-10 … +55 °C

Protection class

IP 67

Downloads

show all

Data sheet

Data sheet – OR18.EL-NV1P.7BCV
- DE (pdf | 831 KB)
Data sheet – OR18.EL-NV1P.7BCV
- ZH (pdf | 874 KB)
Data sheet – OR18.EL-NV1P.7BCV
- FR (pdf | 829 KB)
Data sheet – OR18.EL-NV1P.7BCV
- EN (pdf | 830 KB)

Quickstart

Quickstart – OR18.EL-NV1P.7BCV
- DE/EN/FR (pdf | 296 KB)

Certificates / approvals

DoC / CoC - OR18
- EN/DE/BG/CZ/DK/ES/FI/FR/GR/HU/IT/LT/LV/NL/NO/PL/PT/RO/SK/SI (pdf | 280 KB)

CAD

OR18.EL-NV1P.7BCV / IGES
- (zip | 275 KB)
OR18.EL-NV1P.7BCV / STEP
- (zip | 95 KB)
OR18.EL-NV1P.7BCV / PARASOLIDS
- (zip | 139 KB)

EPLAN

Link to dataportal
- Link to Data Portal

Drawings

show all

Accessories

show all

Fitting emitter

	OR18.TL-ZZZP.7BCV Through beam sensors - standard Article no.: 11157840	emitter through beam sensor 55 m pulsed red laser diode cable 4 pin, 2 m -10 … 55 °C IP 67
	OR18.TL-ZZZP.7BO Through beam sensors - standard Article no.: 11157829	emitter through beam sensor 55 m pulsed red laser diode connector M12 4 pin -10 … 55 °C IP 67

Peripherals

	ZTEST-ALL.DIGITAL Test unit for sensors digital Article no.: 11084377	LED (red/green) for digital PNP/NPN signals Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)
	ZTEST-ALL.ANALOG Test unit for sensors analog & digital Article no.: 11084376	Output via display (V or mA) or LED (PNP/NPN) Teach-in of sensors with integrated Teach- button Connection for plug in power supply (available as accessory)

Mounting accessories

	Sensofix series 18 Article no.: 10151658	Clamps made of stainless steel Ball pivots made of galvanized steel Mounting panel made of stainless steel
	ZADAP-M18.STANDARD Mounting bracket series 18 Article no.: 11172096	Material: Steel galvanized
	ZADAP-M18.SHORT Mounting bracket short series 18 (L design) Article no.: 11171584	Material: Steel galvanized
	ZADAP-M18.LONG Mounting bracket long series 18 (L design) Article no.: 11172095	Material: Steel galvanized
	ZADAP-M18.SWING Mounting bracket for adjustment for sensors series 18 Article no.: 11172110	Material: Plastic (ABS TERLURAN)
	ZADAP-M18.MICRO Mounting bracket for adjustment for sensors series 18 Article no.: 11172099	Material: Steel galvanized
	ZPART-M18.NUT Clamping nut for sensors Ø 18 mm Article no.: 11172111	Material: Plastic (ABS TERLURAN) For re-orders when lost
	Mounting rod with mounting plate holder 200 mm Article no.: 11707685	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 300 mm Article no.: 11707686	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 200 mm Article no.: 11707688	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 250 mm Article no.: 11707697	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod with mounting plate holder 250 mm Article no.: 11707698	Material: Aluminium Part of an assembly Different lengths available
	Mounting rod 300 mm Article no.: 11707687	Material: Aluminium Part of an assembly Different lengths available
	Mounting plate series 500 and ø18 mm Article no.: 11707699	Material: Steel Part of an assembly
	Mounting base Article no.: 11707702	Material: Plastic (PA) Part of an assembly
	Two-way connector Article no.: 11707703	Material: Plastic (PA) Part of an assembly